Karnataka

AOC

Works

Buildings

CONSTRUCTION OF LADIES DRESSING AND TOILET ROOM IN MADHUKAR SHETTY PARADE GROUND AT PTC NAGANHALLI IN KALBURAGI DISTRICT. (SC CATEGORY WORK).

Karnataka State Police Housing and Infrastructure Development Corporation Limited

KSPHIDCL Contracts Section Bengaluru | Bengaluru Urban, Karnataka

Amount: ₹37.4 LCloses: 26 Mar 2026Closed

Timeline

Published11 Mar 2026
Closed26 Mar 2026
Awarded—

Bids

1 Bid26 Mar 2026

#	Company	Amount	Status
1	HANAMANTHAPPA LAXMAN BIRAL ₹39.2 Laccepted-aoc	₹39.2 L	accepted-aoc

Tender Value

₹37.4 L

EMD Value

₹37,500

Closing Date

26 Mar 2026, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Karnataka State Police Housing and Infrastructure Development Corporation Limited

Contact Person

Anil Kumar S

Mobile Number

Work Description

CONSTRUCTION OF LADIES DRESSING AND TOILET ROOM IN MADHUKAR SHETTY PARADE GROUND AT PTC NAGANHALLI IN KALBURAGI DISTRICT. (SC CATEGORY WORK).

Tender Information

Tender ID

KSPHIDCL/2025-26/BD/WORK_INDENT365

Reference Number

KSPHIDCL/2025-26/BD/WORK_INDENT365

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

KSPHIDCL Contracts Section Bengaluru

Source Website

Subscribe to view

Documents Required

16 documents required · 16 mandatory

Technical Bid

RequiredKSPH & IDCL Registration Certificate

RequiredClass-III & above Civil registered contractor of State PWDs / Central/MES/Govt. Undertakings

RequiredIncome Tax returns & PAN

RequiredEPF Registration Certificate

RequiredWork Done Certificate - ITT 3.2 b Similar nature Work done certificate

RequiredLiquid assets and availability of credit facilities

RequiredTurnover Certificate - ITT 3.2 a

Required1.3.of Section-3 Qualification Information

Required1.4.of Section-3 Qualification Information

Required1.6.of Section-3 Qualification Information

RequiredGST Registration Certificate

RequiredExecuted minimum quantities of work - ITT 3.2 c

RequiredWork Done Certificate - ITT 3.2 d Electrical Work done certificate

RequiredNon Refundable Transaction fee of Rs.20,000/- in the form of DD in favour of KSPH & IDCL Own Fund, Bengaluru

RequiredWork Done Certificate - ITT 3.2 e Water supply / Sanitary Work done certificate

RequiredReserved Category Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidder shall pay Contract Management Module processing fees of 0.025% of the contract value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The tender document is part and parcel of the agreement

The intending bidders are requested to note that they should abide by the detailed instructions and conditions contained in the Tender documents and further modifications done if any

The bidder shall study the Tender document Carefully and quote the rates

Drawings uploaded are only for Tender Purpose only

The bidder shall give an undertaking that they would abide by the provisions of employees provident fund and shall remit PF of labourers to the respective PF offices or else KSPH & IDCL have the right to deduct the work bills and remit the same to respective PF offices

The contractor shall quote his rates inclusive of PF as per the applicable rate as issued by the PF department from time to time and if any variation occurs it shall be paid / refunded by / to the Corporation against documentary evidence

The successful bidder shall give an under taking that they would abide by the provisions of the Employees Provident Fund Act

Remittance towards PF shall be commensurate with the labour component of the work involved

The Bidder shall remit PF of labourers to Bidders permanent PF code number only

The bidder should maintain register of labourers deployed and wages paid for the workers and shall produce the documents whenever called for by the competent authority. Remittance towards PF shall be commensurate with the labour component of the work involved

The contractor shall obtain insurance coverage for all the workers deployed for this work

Corrigendum/modification/corrections, if any, will be published in the karnataka public procurement portal and www.ksphc.org web sites only

Tender amount of Rs.3742424.96 is inclusive of all applicable taxes, levies, duties and cess, Building Workers Welfare Cess etc., excluding GST

The rates quoted by the Contractor shall be deemed to be inclusive of all applicable taxes, levies, duties and cess, Building Workers Welfare Cess etc., excluding GST as applicable as per the latest Notifications of GoK and GoI prevailing as on the date of NIT. The Employer will perform such duties in regard to the deduction of such taxes at source as per applicable law. GST shall be paid to the tendered amount separately. The Contractor should submit the tax invoice along with RA Bills

The bidder should furnish the documents relating to registration of GST

The bidder should furnish the valid address, phone number & e mail ID

The intended bidder shall visit the site & quote his offer accordingly and for having visited the site, they should upload the photos while submitting the tender

Bounded scanned hard copies are to be submitted duly marking the Page Nos. within 3 days after the last date of submission of the bid documents online to EE(Contracts), KSPH & IDCL, Bangalore

Further details of the work or any clarifications can be obtained from the office of the Executive Engineer(Contracts), KSPH & IDCL, Richmond Road, Bangalore 560025. Ph: 080-25584102 Extn - 130 / 114 / 117

The Bidder has to make payment of Rs. 20,000/- (Rupees Twenty Thousand Only) inclusive of GST as transaction Fee (Nonrefundable) in the form of DD payable to KSPH & IDCL (Own Funds), Bengaluru and the bidder has to upload the scanned copy of the DD in the Karnataka Public Procurement web portal towards transaction Fee. The original DD should be submitted to Office of the Executive Engineer (Contracts), KSPH & IDCL, No. 59, Richmond Road, Bangalore- 560 025 On or before the Last date of receipt of tender for verification and the non-compliance of the same leads to the rejection of the bid.

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

Technical Criteria

Past Experience

1.3 of Section-3 Qualification Information: Work performed as Prime Contractor (in the same name) on works of similar nature over during the five years (2020-21 to 2024-25)

Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer

3.2 (c) : Quantities of work executed as prime contractor (in the same name) during the last five years (2020-21 to 2024-25)

Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer

3.2- To qualify for award of this contract, each Tender in his/her/their name should have in the last five years i.e. 2020-21 to 2024-25): (b) Satisfactorily completed as prime contractor (at least 90% of the contract value), at least one similar nature of work of value not less than Rs. 9.36 Lakhs

Others -- Work Done certificate issued not below the rank of an Executive Engineer or equivalent.

ITT - 3.2 d) The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totalling Rs.0.47 Lakhs in any one year

Others -- Workdone certificate issued not below the rank of an Executive Engineer. In case of Sub Contractor licence & Consent letter also to be uploaded

3.2 (e) The Tenderer or his identified subcontractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works totaling Rs. 1.55 Lakhs in any one year

Others -- Work done certificate issued not below the rank of an Executive Engineer. In case of Sub Contractor licence & Consent letter also to be uploaded

1.4 of Section-3 Qualification Information : Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender : (A) Existing commitments and ongoing works & (B) Works for which Tenders already submitted

Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer

1.6 of Section-3: Qualification Information: Reports on the financial standing of the tenderer, such as profit and Loss statements and auditors reports for the last five years. (2020-21 to 2024-25)

Others -- Profit & Loss Statement from Registered Chartered Accountant

Capabilities of Vendor

Be a Class-III & above Civil registered contractor of State PWDs / Central/MES/ Govt. Undertakings

Others -- Valid Registration Certificate issued by respective Depts

Be Registered with KSPH & IDCL

Others -- Valid Registration Certificate issued by KSPH&IDCL

Be Registered with GST

Others -- Valid Registration Certificate issued by Competent Authority

Income Tax returns & PAN

Others -- Income Tax returns and PAN certificates

Be Registered with EPF Authorities

Others -- EPF Registration Certificate

ITT 3.3 (c)- Each Tenderer should further demonstrate Liquid assets and /or availability of credit facilities of no less than Rs.11.23 Lakhs (Credit lines/ letter of credit/ certificates from Nationalized / Scheduled banks for meeting the fund requirement etc (Unconditional)

Others -- Letter of Credit Certificates from Nationalized / Scheduled banks for meeting the fund requirement

ITT 3.2 - To qualify for award of this contract, each Tenderer / company in his / its name should have in the last five years i.e. 2020-21 to 2024-25 (c) Executed in any one year the minimum quantities of work executed (Please refer Tender Document)

Others -- Certificate issued from not below the rank of an Executive Engineer or equivalent.

Reserved Category Certificate

Others -- Reserved Category Certificate

Financial Status

ITT 3.2 - To qualify for award of this contract, each Tenderer in his/her/their name should have in the last five years i.e. 2020-21 to 2024-25: (a) Achieved in at least one financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.37.42 Lakh

Others -- Attach Certificate from Registered Chartered Accountant with UDIN Number

Others

1.8 of Section-3 Qualification Information: Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are Proposed to be deployed on this contract, if awarded.

Others -- Organization Chart & Company Profile

Fee & Financial Details

Tender Fee Amount

₹940

EMD Fee Amount

₹37,500

Important Dates

Last Activity

26 Mar 2026

Published

11 Mar 2026

Bid Opening

30 Mar 2026

Download Ends

17 Mar 2026

BOQ Preview

•

CONSTRUCTION OF LADIES DRESSING AND TOILET ROOM IN MADHUKAR SHETTY PARADE GROUND AT PTC NAGANHALLI IN KALBURAGI DISTRICT

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lig...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand).

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand).

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

•

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :. Size 125x64x1.9mm

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :. Size 100x58x1.9mm

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel Hand Rail as per direction of engineer in charge. (size 200 mm)

•

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. (Fastener with threaded dia 10 mm)

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel Aldrop 16mm to 200 mm dia as per direction of engineer in charge.

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

•

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...

•

Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

•

Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade.

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

•

Providing and fixing Chlorinated Polyvinyl Chloride(CPVC)pipes, having thermal stability for hot & cold watersupply,including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps ...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

•

Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...

•

Providing and fixing Pillar cock with high neck with 265mm Extended body made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Economy Class.

•

Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Economy-Class

•

Providing and fixing Single lever Bib cock Long Nose (Lifting type cold water cartridge) with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories com...

•

Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete -Economy- Class

•

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

•

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete.

•

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 100mm x 100mm size P type with Non Modular common burnt clay bricks of designation 3.5& wa...

•

Providing and placing on terrace (at all floor levels ) polyethylene water storagetank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ov...

•

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end)

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

•

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with t...

•

Providing and fixing PTMT grating of approved quality and colour. (100 mm nominal dia)

•

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks

•

Providing 10cms dia PVC cowl with cap of approved 1 st quality and make conforming to ISI specifications and fixing in position as directed (Rate includes cost of materials fixtures including conveyan...

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia. mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running befor...

•

Supplying heavy gauge PVC Conduit Pipe .... dia mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket

•

Supplying & Fixing of 70-150 W lamp holder 2 Pin

•

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.

•

Supplying of .....feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220- 240V@ 50/60Hz & Power ...

•

Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Co...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...

•

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe/ stoneware pipe /on wall / on pole as required. 2.5 to 25 Sqmm

•

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete.(As per Civil SR KSRB 1-2, P-7). In soil (hard)

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed ...

•

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6 mm Copper strip

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Kw-2 Bid Doc WI-365.pdf

Tender Document • 1.42 MB

Make List.pdf

Others - Makelist • 1.02 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

HANAMANTHAPPA LAXMAN BIRAL

₹39.2 Laccepted-aoc