Setting up of Assisted Reproductive Technology Center

WALL SYSTEM 2.0 mm complete with all accessories as per tender specification

CEILING SYSTEM - Complete with all accessories as per tender specification 2.00mm

WALL SYSTEM- Complete with all accessories as per tender specification 1.0 mm

CEILING SYSTEM - Complete with all accessories as per tender specification 1.0 mm

AAC Wall-Made-100MM - Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry 100 mm thick with Grade 1 AAC blocks of density 551 to 650 kg/cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.

AAC Wall-Made-200MM-Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry with 200mm thick with Grade 1 AAC blocks of density 551 to 650 kg/cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately).

False Celing and Coving: Providing and Fixing false ceiling using calcium silicate board of 8 mm thick with 2'X2' gird of galvanised steel saint gobain or equivalent with support frame, tie rods, fasteners, including making necessary cut out for electrical fixture.

PVC FLOORING (ANTISTATIC CONDUCTIVE) complete as per tender specification. a)The Flooring is a Conductive, Vinyl floorcovering in a accordance with EN 1081 (104 ≤Rt ≤106 ) and is available in 2m Roll Widths. b) The 2 mm Homogeneous material incorporates carbon encapsulated granules throughout its full thickness and hasa conductive backing to ensure optimal and constant conductive properties throughout its full life expectancy.

PVC FLOORING (HOMOGENEOUS FLOORING) Complete with all accessories as per tender specification

SELF LEVELING COMPOUND

CEMENT PLASTER (IN FINE SAND) - 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour in Two coats.

Applying two priming coat with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing WC connector socket(for vitreous china & CI pipe) of EDPM good quality with polypropelene body 100x150/100x250 of approved quality and make complete in all respect.

Poviding and fixing health faucet with pipe and hook of approved make and brand complete.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass push cock pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass push cock pillar tap.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : 15mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length : 15 mm nominal bore

Providing and fixing soil, waste and vent pipes : 100 mm dia : Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe of 100 mm dia : SS 304 grade coupling with EPDM rubber gasket.

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100 mm dia Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Providing and fixing CP brass toilet paper holder of approvale make and brand complete.

Providing and fixing CP brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour, 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing SS Grating of 143x143x5 mm thick screwable with SS fixed framed of 150x150 mm size as per approved make and model.

WET AREA WATERPROOFING Providing and sealing pipe penetrations by cementitious grout with epoxy bond compound of approved brand & manufacture, as per manufacturer specification. Providing and applying two coats of acrylic polymer modified cementitious water proof coating of approved brand & manufacture which shall contain a liquid polymer component and a cementitious powder components which shall be mixed as per manufacturer’s instruction and applied over prepared concrete /masonry surface strictly maintaining the coverage specified by the manufacturer. Coating shall have Adhesion to concrete greater than 1 n/mm2 and static crack accommodation of 1mm. Sprinkle coarse sand over final coat of coating when coating is still wet to facilitate in bonding with protection layer. The rate must include the cost of materials, labour for necessary surface preparation and application etc. complete. Proving & laying of protective plaster 20 mm thick cement plaster 1:3(1 cement :3 coarse sand) admixed with integral waterproofing compound in recommended proportion coated surface. Surface area shall be measured for payment.

Supply installation testing & commissioning of S.S. scrub unit as per the specifications in tender document.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour & shade. Area of slab over 0.50 sqm.

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in Charge. (Edge moulding)

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Providing and fixing machine cut mirror polished granite, fixed in partitions/shelves by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth.

Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board : 610x510 mm bowl depth 200 mm.

Providing and fixing C.P. brass long body bib cock of approved make & quality conforming to IS standards and weighing not less than 690 gms, 15 mm nominal bore.

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and fixing in wall lining Bsion board with screws etc. complete as per the directions of Engineer-in-Charge.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Removing and refixing mineral fibre false ceiling tiles at all heights of size 595X595mm. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L- shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size 24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. (Payment of Mineral fibre board to be paid separately)

LAMINAR AIR FLOW SYSTEM, Complete with all accessories as per tender specification

OT Light. Supply installation testing and Commsissioning of Double Dome OT Led Light.

PERIPHERAL LIGHTING AND CLEAN ROOM LUMINARIES Complete with all accessories as per tender specification

TOUCH SCREEN CONTROL PANEL Complete with all accessories as per tender specification

SINGLE ARM ARM ANAESTHESIA PENDANT

PASS BOX Complete with all accessories as per technical specification

PRESSURE RELIEF DAMPERS Complete with all accessories as per technical specification Interlocking 4, Specification as per tender document

HERMETICALLY SEALED SLIDING DOOR A (2100 X 1500mm) Complete with all accessories as per technical specification

HERMETICALLY SEALED SLIDING DOOR A (2100 X 1000mm) Complete with all accessories as per technical specification

HERMETICALLY SEALED SLIDING DOOR B (2100 X 1000mm) Complete with all accessories as per technical specification Automatic Door 6, Specification as per tender document

HERMETICALLY SEALED SWING DOOR B (2100 X 1000mm) Complete with all accessories as per technical specification Automatic Door 6, Specification as per tender document

Swing Doors 1500x 2100

Swing Doors 1000x 2100

Swing Doors 750x 2100

Medical gas copper pipe line

Supply & Installation testing and Commissioning of 15mm copper pipline with necessary fitting for O2, N2O, Med, Air

Supply, Installation testing and Commissioning of 22mm copper pipline with necessary fitting for Vacuum

Supply & Insallation of new 4 gases valve box (O2, N2O, Med, Air, Vacuum)

SITC of LCD Alarm 4 gases (O2, N2O, Med, Air, Vacuum)

Medical gas pipe line Steel

Semi Auto Change Over Regulator Panel Wall mount Single Stage, MOC= SS 316, Inlet Pressure=230bar; Changeover (Outlet) Pressure = 8-10 Bar. Diaphragm=Hastelloy, He Leak Tested CO2, TRI,OXY 2 EACH CYLINDER FOR EACH CHANGOVER

Single Cylinder Panel - SS/ P1=230 Bar, P2=1-16 Bar/ Inlet X Outlet =NPT 1/4 F X NPT 1/4 F, He Leak Tested

Diaphragm Valve - SS/50 Bar , NPT 1/4 F X NPT

Co2 Heater

Flexible hose- SS braided with internal SS core along with safety Wire rope Length: 1 Mtr. Inlet: 1/4''NPTF, Outlet: 1/4 NPTM

Point of Use Regulator Wall Mounting, MOC:SS316L, Electropolished, Specially Cleaned, Inlet Pressure=40 Bar, Outlet Pressure=0 to 3 Bar, With Integrated Diaphragm Inlet Shut-Off Valve, With Hastelloy Diaphragm, He Leak Tested.

SS316 Tube, E P grade , 10 ra internal finish, 1/4" OD x 0.035 WT, Make : WSG

SS316 Welded T , E P grade , 10 ra internal finish, 1/4" X 1/4" X 1/4" HSN code-90262000

Cylinder Belt with Polymide belt

Fittings for Gas Panels, Purge, and Vent

Compression Fitting N1/4''M X CL1/4 OD for Gas Panels for outlet

Compression Fitting N1/4''M X CL1/4 OD for Gas Panels for purge ports

Compression Fitting N1/4''M X CL1/4 OD for Diapgragm valve

Compression Fitting N1/4 MX CL1/4 OD for POU SIS21 Inlet.

Compression Fitting N1/4 MX CL1/4 8MM OD for POU SIS21 Outelt

Compression T fittings, 1/4" OD for Purge line , SS 316,

Cylinder Connectors

Installation Materail, Unstructs, HDPE Clamps, Name Plates Etc

Pressure Transmitter for Gas Management Software Ex rated Pressure transmitter. Pressure range – 0-250 bar,End Connection- ¼” NPT. End Connection- ¼” NPT. t. HSN CODE: 903290009 Nos

Digital Pressure display- Gas Alrarm System

Electrical Caballing for Pressure Transmitter 200 Mtr

SITC of DX AHU 3500 CFM complete as per tender specifications.

SITC of 16 HP VRF Outdoor with AHU twinning Kit, Remote & Intergeration with AHU complete as per tender specifications.

Copper Pipe complete as per tender specifications.

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation.

28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation.

Photo Catalytic Oxidation Unit Supply installtion testing and commssioning of Pohotocatalytic Oxidation system for 3500 CFM complete as per tender specifications.

Duct Heater 4 KW complete as per tender specifications.

AL DUCTING Supply, fabrication and erection of aluminium sheet metal ducting generally as specified complete with i) Aluminium companion flanges girth angles. ii) Turning vanes. iii) All duct components are of Aluminium / nonferrous construction iv) Aluminium structural support systems. v) Sealing gasket to meet specifications vi) Painting of all duct supports and exposed ducting.

0.8 mm Aluminium sheet

1.0 mm Aluminium sheet

INSULATION Supplying and fixing of 25 mm thickness duly laminated aluminium foil of mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self-adhesive nitrile rubber tape insulation complete as per specifications and as required.

Fire Damper

Fire damper

Actuator

Volume Control Damper Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

Supply Air DiffuserSupplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.

Return Air Grill Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required

Exhaust Fan inline fan 1700 cmh @ 20 mm static as per data sheet "EX INLINE-01"

GI Duct Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.

Thickness 0.63 mm sheet

SITC of AHU BMS work including field devices

VRF 40 HP Supply of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5.

Outdoor unit

Supplyg of following minimum capacity 4- way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastomeric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :

25.4mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation OR as per OEM recommendation

31.8mm dia (OD) (Soft drawn) with tube thickness 1.62 mm with 19 mm thick insulation OR as per OEM recommendation

Communication cable 3 core 1.5 sqmm Copper OR as per OEM recommendation

25 sqmm 4 core Aluminium conductor cable OR as per OEM recommendation

Galvanized Coating Aluminium Cable Tray, Sheet Thickness: 2-5 mm x 150 sqmm.

Refnet Joint

Y Joint Refnet Kits for 0.8 TR

Y Joint Refnet Kits for 1 TR

Y Joint Refnet Kits for 1.2 TR

Y Joint Refnet Kits for 1.6 TR

Y Joint Refnet Kits for 2 TR

Y Joint Refnet Kits for 2.8 TR

Y Joint Refnet Kits for 3.2 TR

Y Joint Refnet Kits for 3.6 TR

Drain pipe

Drain Pipe UPVC 50MM

Drain Pipe UPVC 15MM

Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units

Outdoor unit (20 X 2)

Installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit

M.S. Structural Support with powder coated painting for Condensing unit with floor mounting fittings.

M.S Stand for ODU (VRF)(20 X 2) (Floor Mounted Fabricated Stand )

Nitrogen Flushing, Pressure Testing and vacuumising, extra Gas Charging for all the above units as per there copper piping length and the Indoor unit capacity.

Lifting and Shifting of Indoor, Outdoor unit from Ground Level to floor level.

Electrical Installation a) Supply & Installation of White Colour Legrand Myrius (Antibacterial) Series Accessories as below b) White Cover Plates with frames of Legrand - Myrius (Antibacterial) c) Wiring for circuit/submain wiring FRLSH/LS0H PVC insulated copper conductor, single core cable in surface/recessed steel conduit as required

6A Switch 1W - 1 module (Cat No. 6730 84)

16A Switch 1W - 1 module (Cat No. 6730 89)

6/16A Socket - 3 module (Cat No. 6730 95)

RJ-45 Cat 6 UTP - 1 module (Cat No. 6730 81) for Data

RJ-45 Cat 6 UTP - 1 module (Cat No. 6730 81) for Telephone

ETPN DB 8Way IP43-IK 09 with metal door (Cat No. 5076 72)

MCB 32A, 1 Pole C Curve (Cat No. 4085 95)

MCB 10A, 1 Pole C Curve (Cat No. 4085 90)

MCB 20A, 1 Pole C Curve (Cat No. 4085 93)

RCCB 63A, 4 Pole 100 mA(Cat No. 4118 83)

Isolator 63A, 4 Pole (Cat No. 4065 20)

GI Cable Tray

150 x 50 x 18swg GI Cable Tray perforated type

Wiring

2x2.5 sq mm +1x2.5 sq mm earth Cu wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire Cu wire

Polycab - CU/CON.PVC Insulated & UNSH.FRLS CABLE

16 X 5 Core Polycab -XLPE Cu. Flex. Ins..Cable

16 X 5 Core Polycab -XLPE Cu. Flex. Ins..Cable

Supplying and fixing 25 MM size of still comdute along with accessories

Online central UPS 10 KVA (2nos + 1UPS as standby) complete as per tender specifications

AV Integration (Hard Wire) OT To Traninig Room. I unit, Specification as per tender document

2 Way Audio

1 Way Video

DUM Multizone Amplifier

Ceiling Speaker

Handle Microphone

Lapel Microphone

Cable & wiring as required

Providing ,laying , testing and commissioning B Class Heavy duty G.I. pipes conforming to IS :1239 including welding fitting like elbow, flanges, tapers nuts,bolts, gaskets etc, and fixing the pipe on the wall /ceiling with suitable clamps/support frame and painting with two or more coats of synthetic enamel paint of required shade completes as required.

25 mm dia G.I. pipes

Supply of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.

1500 mm SS flexible Sprinkler pipe.

Providing 15 mm dia gunmetal / brass quartzoid type Sprinkler Head with quartz bulb and set to operate at specified temperature

Pendent Sprinkler 680 c (Make Safemax and Agni.)

Upright Sprinkler 680 c (Make Safemax and Agni.)

Supply of Manual call point complete as required as per direction of Engineer-in - Charge. (Agni, Notifier and system sensor.) Conventional panel

Supply of horn cum strobe complete as prequired as per direction of Engineer-in - Charge. (Notifier and system sensor.)

Supply of Smoke detector & Multi sensor with mounting base, LED, complete as per all requirements of technical specifications as per direction of Engineer-in -Charge.

Supply of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of addressable fire control module complete as required(Notifier and system sensor.)

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.(Details of cost for 100 meters)

Supply of CO2 Type Fire extinguisher having capacity: 4.5 Kg, as per IS Standard with Refilling validity of 1 Year

Supply of ABC Type Fire extinguisher having apacity: 6 Kg, as per IS Standard with Refilling validity of 3 Years.

SITC of Relay Module

InterMedics Healtcare LLP