Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical PLOT NO 713 INDI AREA PH LL CHANDIGARH | NA | NA | 160001 | Accepted-Technical eligible |
| 2 | Accepted-Technical 1296 SECTOR 41 B CHANDIGARH | Accepted-Technical eligible |
| 3 | Accepted-Technical 1878 NEW INDIRA COLONY MANIMAJRA CHANDIGARH | Accepted-Technical eligible |
| 4 | Accepted-Technical PLOT NO 691 INDL PHASE II CHANDIGARH | Accepted-Technical eligible |
Tender Value
₹31.0 L
EMD Value
₹62,100
Closing Date
12 Dec 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EECP6
EECP6
White Wash/Painting/Wood Work of all Quarters in Model Jail,Chandigarh
2025_CHD_89470_1
CP6/2025/3395-3407/WHITEWASH
Open Tender
Civil Works
Percentage
30 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹62,100
16 Dec 2025
5 Dec 2025
12 Dec 2025
5 Dec 2025
12 Dec 2025
5 Dec 2025
Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's specification. One or more coats on old work DSR 13.81.1
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work DSR 13.99.1
Finishing walls with water proofing cement paint of required shade:Old work (one or more coats @ 2.20 kg/10 sqm) complete.
Repair to plaster of thickness 12mm to 2omm in patches of area 2.5 sq meters and under,inculding cutting the patch in proper shapes,racking out joints and preparing and plastering the surface of the walls complete,inculding disposal of rubbish to the the ground ,all complete as per the direction of Engineer in charge. with cement motar 1:4(1 cement :4 sand)DSR14.1.1
Preparation of plastered or concrete surfaces oil bound distemper or emulsion or apex paint including sand papering the surface or scrapping by patti ,applying filling with cement based putty (Birla,JK or equivalent)to the required finish complete in all respect and to the entire satisfaction of Engineer-in-charge (NS)
Providing and fixing wooden cabinet of 13½” deep and 2’-0" height with openable shutter at wall above 4’-9" height consisting of 18mm thick both side pre-laminated particle board with one side decorative, flat pressed 3 layer and graded (medium density), grade I, type II, conforming to IS 12823 (exterior grade) lipped with hard wood lipping of size 18mm on exposed edges include cost of piano hinges and handle, magnetic cathcer, nail, screws, synthetic adhesive etc. and fixed in position with help of fasteners at wall complete in all respect to the entire satisfaction of Engineer-in-charge
Providing and fixing of kitchen cabinet below working shelves consisting of chowkhats frame of golden champ wood of 2" x 2"section with one additional member with suitable rebate of 1" x 1/2" on outer side for shutter. The shutters are to be provided with 18mm thick both side pre-laminated particle board with one side decorative, flat pressed 3 layer and graded (medium density), grade I, type II, conforming to IS 12823 (exterior grade) with hard wood lipping of size 19 mm x 6 mm all around and fixed with chowkhat frame with piano hinges and screws etc. and provide with handle and magentic catcher. The complete frame is to be fixed with fastners, painting two coats of synthetic enamel paint over one coat of primer of wooden chowkht etc. completely fixed in position to the entire satisfaction of Engineer-in-Charge.
Providing amd fixing of cupbaord shutter consisting of 19mm thick commercial board with lipping all around and fixed with chowkhat frame with piano hinges and screws etc. and provide with Alum. handle (with base plate) and magnetic catcher. The board surface is to be painted with two coats of special quality synthetic enamel paint after primer coat and preparation of surface, complete frame is to be fixed with iron nails etc. complete in all respects and to the entire satisfaction ofthe Engineer in charge.
Providing and fixing 35mm thick phenol bounded factory manufactured solid flush door shutter ISI marked with both side commercial face in the existing chowkhat. The rate includes the cost of alum hinges, all necessary aluminium fittings and painting two coats over one coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge.
Providing and fixing 35mm thick golden champ wood (kiln seasoned) wire guage door shutter consisting of 100mm x 35mm style and top rail 150mm x 35mm lock rail 200mm x 35mm bottom rail wire mesh 22 x 12mm gauge fixed with 1/2" x 3/4" hollock wood (kiln seasoned) beading complete fixed in position complete in all respect to the entire satisfaction of Engineer-in-Charge.
Providing and fixing Golden champ wood chowkhat (kiln seasoned) 4 1/2" x 2 1/4"including cost of corner straps, iron hold fasts, hinges, screws,nails, fevicol etc. and painting two coats of wood preserver to sides of chowkhats. Rate includes the cost of dismantling of all damaged chowkhats and making good the damage to walls plaster and floors as required including, refixing of grills, disposal of rubbish to the dumping ground the rate further includes the cost of painting two coats synthetic enamel paint over one coat of wood primer complete in all respect and to the entire satisfaction of Engineer-in-Charge
Providing and fixing 35mm thick golden wood (kiln seasoned) glazed window shutters consisting of vertical and horizontal styles 75x35mm size with 4mm thick floated glass pane fixed with 1/2"x3/4" hollock wood (kiln seasoned) beading. The rate further includes the cost of 3" butt hinges alum tower bolts 4", alum handles 2 nos. I-hook and two coats of special quality enamel paint over coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge.
Providing and fixing 35mm thick golden champ wood (kiln seasoned) wire guage window shutters consisting of vertical and horizontal styles 75x35mm size with wire mesh 22 x 12 mm gauge fixed with 1/2"x3/4" golden champ wood (kiln seasoned) beading. The rate further includes the cost of 3" butt hinges Alum tower bolts 4", Alum handles 2 nos. I-hook and two coats of special quality enamel paint over coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge.
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
cancelled_1.pdf
pdf • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.46 MB
Tendernotice_2.pdf
PDF • 18.26 MB
BOQ_109439.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .