Electrical Works

Amount

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour forConcealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour forConcealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

supply and fixing of 36W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 4Feet LED 20W Fitting with LED 20W tube (HigherEnd) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting

Supply and fixing of 4Feet LED 20W Fitting with LED 20W tube (HigherEnd) complete with conduit pipe suspension from the ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting with tube

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb

Renewal by Supply and fixing of BH with 10W LED lamp with PVC unsheathed copper leads from terminals to the fitting

supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 1 metre down rod on the existing fan clamp

Supply and fixing of 300 mm (12") sweep (Light duty) AC exhaust fan complete without provision of hole in the wall

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

Supply and fixing of 450mm (18") sweep (Heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan.

SupplyandfixingofAC/DC76mmbuzzer/callbellsuitablefor230volts50c/ssinglephaseACsupplyonsuitableTWboard with push switch

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting

supply and fixing of 1nos 6A two model 5pin socket, 1no 6A one model switch with model cover plate (plastic) on suitable module concealed box (GI) in flush with wall with connections. Higher end

Supply and fixing of 3nos.6A two module 5 pin socket , 3nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 1no.6A two module socket , 1 no. 6/16A two module socket, 1 no. 6A one module switch, 1 no.16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 20Amps DP plug and socket in sheet enclosure with 32A DP MCB inflush with wall with earth connection. (For AC plug) Legrand (MDS) /Hagger (L&T) make)

Supply and fixing of 32A DP MCB in suitable sheet steel enclosure with inter connection.(Make Legrand /Hager Make )

Supply and fixing of 63A FP MCB in suitable sheet steel enclosure with inter connection.(Make Legrand /Hager Make )

Supply and run of 2 of 1.5sq.mm. PVC insulated Scunsheathed FRLS copper conductor of 1100V grade in rigid pipeconcealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copperwire and making good of the concealed portion with suitable colour

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion .

Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion.

Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion

Supply and Run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position.

Supply and laying of 31/2 x 35 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 Mtr layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clamping of 31/2 x 35 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and clamping of 31/2 x 95 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and clamping of 31/2 x 185 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and laying of 31/2 x 185 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 Mtr layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and fixing of brass cable gland for 3-1/2 x 185 sq.mm. PVC LTUG armoured cable with earth connection

Supply and providing cable end termination of 3-1/2 x 185 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and run of 25 mm x 6 mm tinned copper flat with necessary clamps / supports on wall /floor /ground for earth connection

Supply and Run of 25mm x 3mm Tinned Copper flat with necessary clamps/ supports on wall/ground to earth connections

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. (Like Legrend/ Hager make)

Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush wall with earth connection only. .

Supply and fixing of Three Phase 4 Way Vertical TPN DB IP43 Protection Metal Door , with 63A 4 pole MCB Isolator as incoming and 12Nos 6A to 32A SPMCB as Outgoing in flush with wall with earth connection only.MCB’s should be with ISI mark. (Like Legrend/ Hager make).(Like Legrend/ Hager make)

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry .

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply and fixing of 1000W automatic electric water heater of 25 litres capacity suitable for 230V 50 c/s AC supply on suitable MS clamps with 3 core flex wire, but without plumbing work

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 120W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .

Supply and laying of 4 x 16 sq.mm PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good

Supply and clarnping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 4 x 16 sq.mm. LTUG armoured cable with earth connection

Supply and fixing of 2.0TR 5star rated energy efficient high wall mounting Split type AC units, consisting of 1no outdoor condensing unit, complete with hermetically sealed compressor with R-22 non CFC Refrigerant and 1no 2.0TR capacity hi-wall mountable Evaporator, blower motor and connected accessories, control with maximum cooling guaranteed and minimum power consumption suitable for operate on 230V-50hz, 1ph AC power supply etc., Make: Carrier/Havells-Lloyd/Sharp/equ

Supply and fixing of Wall mountable 5 KVA automatic voltage stabilizer with 3 minutes time delay, high & low voltage cut off arrangement etc., Make: V-guard./equ.,

Supply and fixing of angle iron stand suitable for 2.0TR Condensing unit,

Supply and laying of 5/8” & 3/8” copper refrigerant pipe with 2.5sqmm-3 core power cord wire & etc.,

Supply, Erection, Testing and commissioning of LT/ CT metering box of dust and vermin proof size 48” x 33” x 12” made up of 16 SWG CRCA sheet with confirming to IE rules specification 1) The metering box should be divided in to three separate chambers for metering chambers 2) The Metering chamber, Necessary space to the provided to fix one number Trivector meter and 1numnber 14 terminal box for Trivector meter 3) Bus chamber should be provided with 1” x ¼ copper flat for three phases and neutral. Buses should be moulded on suitable insulators with 3nos of 150/5A CT coil ( Kappa) 4) The metering chamber should be provided with glazed inspection door arrangement indication lamp arrangement should be provided with suitable control push button switch in the door of meter chamber 5) The doors of all the three chambers should be earthed with copper wire 6) The metering box arrangement should be erected on suitable MS channel arrangement 7) 1’x 1/8” copper flat of 0.4mt long used as earth bus and it should be fixed oat one side of the lower portion with suitable number of earth bolts. 8) The box should be painted with powder coated enamel paint 9) Neutral link should be provide inside the pillar box

SRI GURU RAGHAVENDRA ELECTRICALS (BID ID -1492187)

U.S. ELECTRICALS (BID ID -1492498)