Repairs and Renovation of Anganwadi Building at Poonambattu H/O Maniyambattu Panchayat

Amount

Earth work excavation for foundation in all classes of soils and sub soil to full depth except in hard rock requiring blasting but inclusive of shoring strutting if required for the sides of foundation.

Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour charges etc.

Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc.

Providing granolithic floor finish in cement concrete 1:2 :4 mix using 10-12mm ISS metal to 40mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum 40MM THICK

Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

provision for Cuddapha slab cubboard including all labour charges etc., complete

Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc.

Plastering with cement mortar 1:3, 10mm thick including cost and conveyance and all labour charges etc.

Paving the Floor with Vertified tiles of size 600x600x8mm laid in CM 1;2,20mm thick and pointing with white cement 0.40kg per sqm mixed with colouring pigment to siut the colour of the tiles including cost and conveyance of all materials to site and all labour charges etc complete

Painting two coat with approved quality of oil bound distemper with colour over one coat of white cement for primier coat for the base including preparing surface and all materials cost labour etc

Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc complete.

Painting two coats using Ist quality readymix enamel paint of approved colour including cost and conveyance and all labour charges etc.

Painting two coats using black board painting including cost and conveyance and all labour charges etc.

Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for 10 cum.

Provision for Rain water harvesting arrangements

Provision for Inner Cartoon

Provision for PVC Sintex tank 1000 Litr Capacity

Provision for Electrical arrangements Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with switch box with 5A F.T. switch inflush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for light point.

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with switch box with 5A F.T. switch inflush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for Fan point (For electronic Regulator)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter lockingWall socket with 5A Flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point.

Supply and fixing of 1200mm sweep AC Ceiling fan complete with stepped electronic 300w regulator with 300mm down rod on the existing clamps (crompton make).

Supply and run of 4 x 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W Tube light

murugan (BID ID -1290472)