REPAIRS TO VARIOUS MISC B/R AND E/M WORKS AT DAD COMPLEX UNDER GE NASIK ROAD

Amount

Taking down MS window/ventilators frames with shutters of any size and any description,making good soffits,jambs,cills etc to receive new window/ventilators frame complete all as specified and as directed. Note: Work is to be executed for high rise bldgs.

Taking down carefully MS window shutters of any size and description,making good soffits,jambs,cills etc to receive new window/ventilators frame complete all as specified and as directed. Note: Work is to be executed for high rise bldgs.

S&F aluminium(50 micron powder coated) frame for doors,windows,ventilators and glazed partition frame of any size with one or more rebates including joining cleat,beading,glazing clips and connected accessories as required for fixing etc.complete all as specified. Note. Work is to be executed for high rise bldgs.

S&F aluminium (50 micron powder coated) door shutters,aluminium sections weighing 0.55kg/m including necessary joining cleats,glazing clips,rubber neoprene packing,handles 2 nos in each door shutter,hinges,anodised aluminium snap beading screws etc complete all as specified. Note: Work is to be executed for high rise bldgs.

S&F aluminium(50 micron powder coated) window and ventilator shutters,sliding type without sash bars,aluminium sections weighing 0.55kg/m including necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading,screws,anodised aluminium fittings. Note: Work is to be executed for high rise bldgs.

S&F aluminium(50 micron powder coated) window and ventilator shutters,side hung without sash bars,aluminium sections weighing 0.55kg/m including necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading,screws,anodised aluminium fittings such as peg stays/tower bolt 150mm long(1nos),hinges type B-21,100mm long(2Nos),suitable handle(2 Nos per shutter). Note: Work is to be executed for high rise bldgs.

S&F 4.0mm thick sheet glass,ordinary quality and glazing with silicon gel in square n. exc 0.5 sqm in each pane. Note: Work is to be executed at any height and situation.

M&L for 3.0mm thick frosted sheet glass,ordinary quality and glazing with silicon gel in square n.exc 0.5sqm in each pane.

S&F 4.0 mm thick sheet glass,ordinary quality and glazing with silicon gel in square exc 0.5sqm in each pane. Note: Work is to be executed at any height and situation.

S&F Stainless steel wire cloth 0.56mm nominal dia of wire and average witdth of aperture 1.00mm and fixed with stainless steel wire staples. Note: Work is to be executed at any height and situation.

Dismantling wrought iron or mild any description such as steel gate,steel frame works,purlins,rafter,railings,balusters and window guard bars and directed by engr-in-charge. Note: Work is to be executed at any height and situation.

S&F framed work as in grill,doors or gates of angle or other section with gusset plates,braces,etc. complete,drilled for fixing of steel sheeting or other coverings,doors,etc to be prepared for hanging or sliding with and inlcluding either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering,running rails and guides) and hanging;also fastening and fixing Fe Grade 290(Gde E-165) complete all over and including applying two coats of synthetic enamel paint over a coat of red oxide primer. Note: Work is to be executed at any height and situation.

M&L for preparation of old painted steel surfaces of any description,over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint of tint as directed by engr-in-charge.

M&L for Repairing of broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional area not exceeding 150 sqcm) with cement mortar 1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh with nails (to hold fresh mortar/concrete) including necessary formwork ,sccaffolding etc. over and including match surface with existing surface by painting. Note: Work is to be executed at any height any situation.

M&L for plastering on walls in cement mortar 1:4 in patches not exc 3sqm on the building over and including taking down old plastering on walls,any description including finishing the surface to match existing by painting including necessary sccaffolding etc. Note: Work is to be executed at any height and situation.

Taking down chowkhats or frames with shutters(without taking off shutters from the frame) exc 1.5 sqm but n. exc 4 sqm each and making good the jambs,soffits of lintels etc. after fixing of new chowkhat or frame to match the existing surface. Note: Work is to be executed at any height and situation.

M&L for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer -In- Charge.

M&L for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type modified flush door shutter with provision of fixing wiremesh of 0.56mm nominal dia of wire and average width of aperture 1.00mm (with provision of fixing mosquitto proofing in decorative fashion as directed by engr-in-charge) of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer -In- Charge. Note.wire mesh door shutter shall be factory made.quoted rate deems to be inclusive of all additional cost for cutting door in size and shape,wastage and wiremesh beading etc.wiremesh shall not be paid separately.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm(single/double rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge over and including M.S. hold fast/ lugs or SS dash fasteners etc.

Taking down chowkhats or frames with shutters(without taking off shutters from the frame) n exc 1.5 sqm each and making good the jambs,soffits of the lintels etc. After fixing of new chowkhat or frame to match the existing surface. Note: Work is to be executed at any height and situation.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50 x100 mm(single/double rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.over and including M.S. hold fast/ lugs or SS dash fasteners.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

Taking down shutters of any description exc 1 sqm and n. exc 2 sqm each. Note: Work is to be executed at any height and situation.

Taking down shutters of any description exc 2 sqm each. Note: Work is to be executed at any height and situation.

M&L for 35mm thick second class hard wood,factory made,glazed and skelton shutters,open rebated and prepared to receive glass,gauge,etc(without sash bars),edges of framing plain,chamfered or rounded.fitted with cut and mitred beads for securing glass,etc,; sizes of members of shutters as specified in SSR Part-I,section 8,clause 8.24(a);supplied and fitted to chowkhats.

S&F for factory made framed paneled shutters 35mm thick of 2nd class hard wood(any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial face veneers fixed to chowkhat. The size of rail and stile as per IS:1003(Part-I),Kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for Preparing new wood or wood based surface over 10cm width or girth and two coats of synthetic enamel paint over and including a coat of pink primer. Note: Work is to be executed at any height and situation.

S&F 100mm Stainless steel butt hinges.

S\&F 200mm size Stainless steel,barrel tower bolts.

S&F 300 mm size stainless steel, sliding door bolt with hasp,staple(bolt type) and fixing clips of sheet.

S&F stainless steel handles,125mm size,fabricated type.

Dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing),removing debris out of MOD land and rubbish off the premises.

M&L for 40mm thick cement concrete 1:2:4 type B0(using 12.5 mm graded aggregate) as in levelling course to flooring etc.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in CM 1:4.

M&L for 8-10mm thick double charged vitrified tile ,area of each tile not exceeding 0.36 Sqm as in flooring,laid in any shape/pattern over and including 15mm thick screed in CM 1:6 as in floors,jointed in neat cement slurry and pointed in white cement to match the shade of the tile.

M&L for 8-10 mm thick double charged vitrified tile as in skirting,laid in any shape/pattern over and including 10mm thick backing coat in CM 1:4 and pointed in white cement to match the shade of the tile.

M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 by using Ditachment DM 1% by weight of cement and surface made smooth. After curing period, two coat of Ditachment DS shall be applied @2.50 Kg/Sm. The paste like consistancy is made by using 2.5 Kg of Ditachment DS powder in one litre of admixture (The admixture is made by dissolving 1 part by volume of Nafufill SBR & 4 part by volume of water). After 3 days curing, testing shall be done by flooding for 24 hours. Finally protective plaster coat of 10mm thick in CM 1:4 shall done by using Putz Ditachment 1% by weight of cement over layer of Detachment DS. All joints of CI Pipe, Nahani trap, WC connection etc. shall be filled by mixture of cement, fine sand and 10% Nafufill SBR by weight of cement. 32mm dia and 500mm long GI Spout light grade shall be provided in all sunken slabs to drain off water. Note.work is required to be executed on top priority basis.urgency factor and extra laobour cost shall be deemed to be included by contractor while quoting.Nothing extra shall be paid.

S&F in repairs Vitreous China water closet squatting pan, 'Orissa pattern' size 580 x 440 mm white,with intergral foot rests and P/S trap(excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding.

S&F in repairs 10 litres capacity PVC valveless,syphonic action type,flushing cistern.low level,white,with inlet,ball valve.float and handle including flush pipe and brackets complete all as specified and directed.

S&F in repairs Vitreous china Premium/1st quality wash down water closet wall hung EWC white/ivory/off white(closed pattern incl all necessary accessories like rag bolts/gel gasket,sheet cover,jet spray etc over and including flush pipe complete in all respect all as specified.

S&F in repairs Vitreous china wash basin white,flat back,size 550 x 400 mm,including cutting for and pining in ends of bracket or erecting stand,with and including 32mm waste fitting brass,chromium plated with long screwed shank and fly nut,flange end bedded in red lead cement,brass chromium plated bottle trap with inlet and outlet screwed for pipe or connections 32mm bore,including necessary packing,union and cap and fixed in repairs.

M&L for PVC(SWR) floor trap (75 mm dia), plain with grating including jointing with solvent cement to mitigate the site requirement to the entire satisfaction of engr-in-charge.

Taking up or down steel tubing and connections15 mm bore including cleaning for re fixing or removal to store. Note.work is to be done in multistorey bldgs(int and ext plumbing)

Refixing old steel tubing and connections 15mm bore in new or old position(wall,ceiling,floors,etc. Note : - GI tubing shall be concealed wherever directed by Engr-in-charge.contractors quoted rates deems to be inclusive of the said provision.

S&F 15mm bore galvanised steel water tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceiling or laid in floors. Note :- GI tubing shall be concealed wherever directed by Engr-in-charge.contractors quoted rates deems to be inclusive of the said provision.

Supplying and laying of CPVC concealed pipes 15mm outside dia pipe SDR 11 & plain CPVC SDR 11 fittings in ceiling/wall/floors complete all as specified(Internal plumbing shall be concealed)

Taking up or down steel tubing and connections 20 mm bore including cleaning for re fixing or removal to store Note.work is to be done in multistorey bldgs(int and ext plumbing)

Refixing old steel tubing and connections 20mm bore in new or old position(wall,ceiling,floors,etc. Note :- GI tubing shall be concealed wherever directed by Engr-in-charge.contractors quoted rates deems to be inclusive of the said provision.

S&F 20mm bore galvanised steel water tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceiling or laid in floors. Note : GI tubing shall be concealed wherever directed by Engr-in-charge.contractors quoted rates deems to be inclusive of the said provision.

Supplying and laying of CPVC concealed pipes 20mm outside dia pipe SDR 11 & plain CPVC SDR 11 fittings in ceiling/wall/floors complete all as specified(Internal plumbing shall be concealed)

S&F in repairs 15mm bore bib taps,fancy type,cast copper alloy,chromium plated with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrule and fixed in repair.

S&F in repairs hand shower(health faucet) 1Mtr PVC tube with wall hook (CP) complete all as specified and directed.

S&F brass CP wash basin mixer for mixing hot & cold water screwed down for iron pipe and 15mm bore fixed in repair.

S&F Brass CP mixer for mixing hot and cold water,screwed down for iron pipe 15mm bore and fixed in repairs.

S&F in repair 15mm bore fancy type pillar taps,cast copper alloy,with capstan heads,chromium plated,screwed down high pressure,with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts.screwed for iron pipe and fixed.

S&F in repairs 15mm bore stop valves,cast copper alloy,fancy type,chromium plated(anlge type) screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed.

S&F in repairs 15mm bore stop valves,cast copper alloy,fancy type,chromium plated with long shank and cup(concealed type) screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm.

S&F 32mm bore low density polyethylene(LDPE) pipes of pressure rating 6kgf/sqcm including fittings.

S&F in repairs brass chromium plated shower rose 125mm size with swivel joint,including fixing to steel pipe or union 15mm bore.

S&F in repars sink made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330 mmx 160mm. SS sink shall be manufactured from salem stainless steel grade A1S1305.

S&F in repairs Stainless steel sink with draining board, made out of 1.0mm thick sheet for kitchen or laboratory with plug,washers,waste pipe,cast iron cantilever brackets,connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm.SS sink shall be manufactured from salem stainless steel grade A1S1305.

Dismantling stone slabs and tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortar.

M&L for 18 to 20 mm thick Granite of any description work (Table rubbed and polished) in steps,jambs,pillars,window cills,cooking platforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 18 to 20mm thick.over and including different type shade/colour all as specified and directed. Note.Granite shall be telephonic black only.In aluminium windows granite shall be used in jambs of windows,in 100mm width(minimum).contractors quoted rate deems to be inclusive of the said provision.

M&L for machine cut cudappah stone slab 20-25mm thick over 10 mm thick cement screed base in CM 1:4,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polshing complete.

Rounding to edges of stone slabs one edge,such as in steps,cooking platform and other similar situations(stone slabs so provided shall not be less than 900mm in length).

Dismantling water tanks exc 250 ltr & n exc 500 ltr capacity and removing to store

S & F Rotational moulded polyethylene water storage(capacity 500 ltr) tanks(cylindrical vertical with closed top and double layered) hoisted and fixed in position all as specified in SSR Part-I(ISI marked).

Dismantling water tanks exc 500 ltr & n exc 1000 ltr capacity and removing to store

S&F Rotational moulded polyethylene water storage(capacity 1000 ltr) tanks(cylindrical vertical with closed top and double layered) hoisted and fixed in position all as specified in SSR Part-I(double layer).

S&F ball valves,20mm bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed.(minimum weight 210 gms) fixed in repairs(double layer).

M&L for fixing in repairs 25 mm bore matt finish stainless steel,best quality as approved by Engr-in-charge over and including suitable projecting type brackets,end finals,socket for dead ends of pipe as the case may be complete all as specified and directed.

Disconnecting existing tanks exc 250 n exc 500 Ltrs,setting aside(or lowering if required) cleaning and removing all scale,dirt etc. from the mouth of circulating pipes etc and hoisting if required,reconnecting and refixing in position. Note: Work is to be execute at any height and situation.

Disconnecting existing tanks exc 500 n exc 1000 Ltrs,setting aside(or lowering if required) cleaning and removing all scale,dirt etc. from the mouth of circulating pipes etc and hoisting if required,reconnecting and refixing in position. Note: Work is to be execute at any height and situation.

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box,main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed.

Taking down AC rain water pipes(any size or pattern) including all fittings,head shoes,bends,swan neck etc. Note: Work is to be executed at any height and situation.

S&F PVC(SWR) pipes 110mm bore single socketed,in any length with rubber ring joints,laid in trenches or in floors/walls as RWP over and including fixing clamps,bends,shoe bend,Tee etc. Note: Work to be executed at any height and situation.

S&F PVC(SWR) pipes 75 mm bore single socketed,in any length with rubber ring joints,laid in trenches or in floors/walls including all bends,shoe bend,Tee,PVC fixing clamps etc. Note: Work to be executed at any height and situation.

Dismantling wall and ceiling boards(fibre,pulp,insulation,etc.) or insulation boards/slabs/blankets,kitchen cabinets board any thickness,including cover fillets,frame etc.

M&L for 18-20mm thick one side prelaminated(decorative type) solid wpc board as in kitchen cabinets,partition etc over and including suitable butt hinges of ss,magnetic catcher,beading,ball bearing runners 450mm telescopic channel,suitable handles of ss etc complete all as specified and directed to make the shutters/partition/drawers fully functional all as per site requirement.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 60x30(single/double rebated) mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.over and including M.S. hold fast/ lugs or SS dash fasteners.

S&F in repairs kitchen plate rack made out of stainless steel 0.8mm thick complete of size not less than 750x750x200mm ,duly assembled and fixed to wall with wall screws/fasterners all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail 'D' shape 20mm dia 600mm long.

S&F in repairs plastic seat cover white closed pattern with flat bottom and cover with mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repairs Stainless steel wire cloth 0.56mm nominal dia of wire and average witdth of aperture 1.00mm and fixed with stainless steel wire staples or wooden beading complete.

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

Receiving complaints from JE incharge lodged by the user/occupants of electrification nature, rectification of the fault as per the compaint lodged by the user onward KWH meter in respect of main distribution board having switch board, fused, MCB distribution board in sheet metal enclosure, point wiring fixture for light/fan /bell /light or power sockets, metal clad plug socket complete repair to the extend by removing connections from the system, removing faults in (surface /concealed) wiring/ circuits, sunken boxes, Junction boxes, main switches, MCBs/DBs any type of utility light fittings, lamp holders, AC ceiling fan/exhaust fans and other connected fixtures of internal electrification including providing stores such as wires of appropriate size and conductor matching to existing one upto the light of 2 mtr, insulation tape, screws, nuts as per the site requirement to rectify the fault with regard to complaint lodged and refixing of fitting and fixture to their original position as dismentled complete all as directed at site to the entire satisfaction of Engineer -in- Charge.

Note : (i) Any copmplaint which is left out/unattendent 2 days by the electrician by any reasons the same to be communicated to the JE incharge /AGE E/M with reason. (ii) New material/stores provided for completing the job shall be measured and paid for separetely under relevent items of sch 'A'. (iii) Contractor shall provide the all type of T & P to each electrician for attending the internal electric complaints. (iv) Contractor shall provide the complaint register and complaint slip serially numbered in duplicate as per sample. The rate of such items included in this items. (v) Any unattended complaints not done in specified time limit. The contractor shall penalty Rs. 200/- on each complaints per day. (vi) Docket shall be taken from MES complait cell at every morning at 09.00 am bt rep of Contractor and submitted at Complaint cell on next morning at 08.45 am afeter satisfactorily completion on daily basis.

Supply only switch piano type 5 Amps one way AC 230 Volts.

Supply only switch piano type 5 Amps two way AC 230 Volts.

Supply only of bell push 5 Amps, AC 230 Volts.

Supply only switch socket combination outlet 3 pin 5 Amps flush type (Multi purpose) piano type AC 230 Volts.

Supply only switch/socket combination outlet 2 in 1, 3 pin 5 Amps and 15 Amp flush type (Multi purpose) piano type AC 230 Volts.

Supply only electronic dimmers, 450W, 250V flush type on the exiting phenolic laminated sheet etc. as reqd.

Supply only stepped type electronic fan regulator, flush type on the exiting phenolic laminated sheet etc. as reqd.

Supply only switch modular type 6 Amps one way AC 230 Volts.

Supply only switch modular type 16 Amps one way AC 230 Volts.

Supply only modular type bell push 6 Amps, AC 230 Volts.

Supply only modular type socket 6 Amps 2/3 pin combined, AC 230 Volts.

Supply only modular type socket 6/16 Amps 2/3 pin combined, AC 230 Volts.

Supply only modular type fan regulator, AC 230 Volts.

Supply only modular white cover plate with frame, 2 module.

Supply only modular white cover plate with frame, 4 module.

Supply only modular white cover plate with frame, 8 module.

Supply only ceiling rose 65x50mm two to three terminal AC 230 volts complete all as specified.

Supply only buzzer,AC, 230 volts, single phase.

Supply only bell, ding dong, AC, 230 volts, single phase.

Supply only bell multi music type AC, 230 volts, single phase.

Supply only lamp holder insulated body with back plate batten/angle type for batten fittings.

Supply only sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP)

Supply only of 30 Watt LED streetlight fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08.

Supply only cable flexible PVC insulated twin core with copper conductor of size 23/0.0076

Supply only cable flexible PVC insulated twin core with copper conductor of size 40/0.0076

Supply only plug top 3 pin 5 amps AC 230 volts.

Supply only plug top 3 pin 15 Amps AC 230 volts.

Supply only PVC connector block two ways AC 230 volts suitable for fan/tube light fittings etc.

Supply only bakelite sheet not less than 3mm thick for mounting of switch sockets, fan regulators, etc. size 100x100mm or PVC rectangular Box of 100 mm x 100mm and 50 mm deep.

Supply only bakelite sheet not less than 3mm thick for mounting of switch sockets, fan regulators, etc. size 175x100mm or PVC rectangular Box of 175 mm x 100mm and 50 mm deep.

Supply only bakelite sheet not less than 3mm thick for mounting of switch sockets, fan regulators, etc. size 250x200mm or PVC rectangular Box of 250 mm x 200mm and 50 mm deep.

Supply only bakelite sheet not less than 3mm thick for mounting of switch sockets, fan regulators, etc. size 200x150mm or PVC rectangular Box of 200 mm x 150mm and 50 mm deep.

Supply only bakelite sheet not less than 3mm thick for mounting of switch sockets, fan regulators, etc. size 350x300mm or PVC rectangular Box of 350 mm x 300mm and 50 mm deep.

Supply only brass/copper thimble (lugs) bottle type suitable for MCBs with sub circuit wires.

Supply only of rigid non metalic PVC conduit conduct including junction boxes terminal, tees bends, elbows reducers, bell mouth tube ends.

Supply only of 20 Watt inverter LED 6500 K (PRIDE PLUS) LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours.

Supply only of sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts 8 way with 200 Amps rated busbar.

All as per ser item No. 127.00 above but 4 way SPN with 200 amps rated bus bar.

All as per ser item No. 127.00 above but 4 way TPN 415 volts.

Supply only MCB SP, 6 to 32 Amps 10 KA single pole AC 230 volts

Supply only MCB SPN 6 to 40 Amps 10 KA AC 230 volts .

Supply only MCB TPN, 415 Volts, 63 Amps, 10 KA..

Supply only PVC casing caping and fixing accessories .

Supply only of 20 Watt LED 6500 K inverter LED batten with square profile and aluminium batten channel in anodized finish. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours.

Supply only smart extruded aluminium LED batten (4 ft) for surface application indoor decorative type with opal diffuser, IP 20 protection, 6500 K CCT, microwave sensor to save more energy. Reduce the light intensity by 70% during non-occupancy.

Supply only LED lights fitting 1x 10W (2 Ft), 220V, AC, LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8-10 hours and back up time upto 4 hours.

Supply only LED luminaire 600 x 600mm, 36 watt, 220 volts AC recessed/ surface type fittings, epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc.

Supply only LED lamp 9 watt capacity.

Supply only invertor LED lamp 12 watt capacity.

Supply only of 25 Watt LED streetlight fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08, including 1.2 RM GI pipe bracket of 40mm dia, connecting up with 2/3 core flexible coppper conductor cable.

Supply only in replacement of invertor LED round shape 15 watt 220 volts AC recessed type with high efficacy PMMA diffuser soft glare free light complete with drivers, clamps and suitable size as per ground requirement.

Supply only in replacement of invertor LED bulkhead 10 watt 220 volts AC with high efficacy PMMA diffuser soft glare free light.

Taking down carefully aluminium point wiring (light, fan, socket, bell or power) complete including all fittings and fixtures, removing, materials from site and making good disturbed surfaces of wall, ceilings etc.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC casing & caping and accessories surface on wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for PVC casing & caping and IS:3419:1976 for accessories), with mild steel/pressed steel sunken boxes( with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with modulae plate suitable for fixing Modular switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site Note :- Modular plates and Steel sunken box included in quotated rates (ii) Making good the disturbed surface to match with existing surface

All as per ser item No. 144.00 above but for one light controlled by two switches.

All as per ser item No. 144.00 above but 2/3 pin socket out let 5 Amps with 1.5 Sqmm on same board.

All as per ser item No. 144.00 above but for bell point.

All as per ser item No. 144.00 above but 2/3 pin socket out let 5 Amps with 1.5 Sqmm on independent board.

All as per ser item No. 144.00 above but for 2 in 1 three pin socket outlet 15/25 Amps on independent board with 4 Sqmm cable FRLS copper conductor multistranded including 4 sqmm PVC insulated and unsheathed FRLS copper conductor cable as earth continuity wire all as specified and directed by Engr-in-Charge.

S&F Modular switch,1 way 6A with "light / fan Marking" , 1 module, 230 volts complete all as specified and directed.

S&F Modular 16A 1 Way Switch with Indicator , 1 module, 230 volts complete all as specified and directed.

S&F Modular 6A Bell Push Switch with Indicator, 1 module, 230 volts complete all as specified and directed.

S&F Modular Switch two way 6 Amps, 230 volts complete all as specified and directed..

S&F Modular socket 6A 3 Pin Round Socket with Shutter (ISI mark), 2 module,230 volts complete all as specified and directed.

S&F Modular socket 6A/16A 3 Pin Socket with Shutter (ISI Mark), 2 module,230 Volts complete all as specified and directed.

S&F Modular fan regulator flush type 2 Module with 4 Step Regulator 100W (ISI mark),230 Volts complete all as specified and directed.

S&F Modular Electronic Bell AC 230 Volts single pole .2 module complete all as specified and directed.

M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 2.5 Sqmm, earth continuity conductor of size 2.5 Sqmm to be drawn through and including PVC CASING CAPING not less then 20mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 2.5 sqmm and one wire of 2.5 sqmm for earthing and one run of PVC casing/caping shall be measured as one unit.

M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through and including PVC casing capping not less then 32mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. (Notes:- Two wires of 4 sqmm and one wire of 4 sqmm for earthing and one run of PVC casing capping shall be measured as one unit.)

S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.

S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.

S&F MCB, single pole and neutral, 240 Volts , 40-63 Amps all as specified and as directed.

S&F MCB, single pole and neutral, 240 Volts , 6-40 Amps all as specified and as directed.

Taking down/maintenance for parts of geysers of any capacity /make after disconnecting the wire from existing power point and refixing the same after replacement of heating element, thermostate, geyser assembly, PVC pipe & anchor bolts, etc. (if required) complete all as specified and directed by Engr -in- charge, Notes :- (i) Work shall be carried out at the site on routine basis (ii) Spares (heating element, thermostate, ARV, NRV, PVC pipe, gasket and anchor bolts etc. will be measured and paid separately)

Supply only heating element tringle type 1500 watt, complete all as specified and directed by Engineer –in-Charge.

Supply only heating element cup type 2000 watt, complete all as specified and directed by Engineer –in-Charge

Supply only themostate for geyser, complete all as specified and directed by Engineer –in-Charge

Taking down of ceiling fan/exhaust fan of any size /sweep after disconecting the wire from existing ceilling rose and refixing the same after repair/ rewinding, cleaning dust, oiling, greasing & hanging clamps (if required) complete including providing flexible twin core copper conductor 40/0.0076 stranded cord from ceilling rose to connection of fan upto 1 mtr length complete all as directed by Engr -in- charge.

Dismantling of ceiling fan 1200MM, segregation of unserviceable parts, cutting and removing out copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape, Rotter soft etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with replacement of unserviceable spares parts, (spareparts will be measured & paid separately) including necessary lathe work for fixing of bush/bearing greasing the same with approved grade of grease, making all electrical connection and including supply and fixing the following items (Split pin - 02 Nos, Connection block - 1 No and Insulation rubber bush. - 01 No) and including necessary transportion to workshop, for following sweeps of ceiling fan .

Overhauling of ceiling fan of any make and sweep after opening and cleaning rotor bearing and stator properly and oiling/greasing of bearing/ bushes, reassmbling the same, fixing and coonecting on its existing position and testing on completion all as specified and as directed including taking down. (Note- (i) Overhauling of ceiling fans will be carried out at AGE E/M Yard only. (ii) The spares required shall be measured and paid separately in the relevant items).

Taking down old universable rusted ceilling fan blades and providing new ceilling fan blades with fixing new screw as apporpriate shape /size suitable for ceilling fan of any make and 1200mm sweep size complete all as specified and directed.

Taking down old universable rusted ceilling fan blades and providing new ceilling fan blades with fixing new screw as apporpriate shape /size suitable for ceilling fan of any make and 1400mm sweep size size complete all as specified and directed.

Taking down old universable rusted exhaust fan blades and providing new exhaust fan blades with fixing new screw as apporpriate shape /size suitable for exhaust fan of any make and 380/450mm size of sweep complete all as specified and directed.

Supply and fixing of stator and rotor assembly including body cell of ceiling fan for size 1200 mm sweep complete including carbon brush, wire, etc all as specified and directed by Engr in Charge.

Painting of ceiling fan/ 1200/1400 mm sweep/exhaut fan 225 to 450 mm sweep complete including fan blade down rod with synthetic enamelled paint of white tint including cleaning and removing dust and dirt and making smooth surface for painting including writing MES No complete all as specified.

Taking out worn out gun metal bush and supply and fix new gun mettal bush for various make of ceilling fan of size 1200 to 1400 mm sweep complete all as specifide and as directed

Supply and fix bearing for ceiling fan (Bearing No.6201 Z Type).

Supply and fix bearing for ceiling fan (Bearing No.6202 Z Type).

Supply and fix bearing for ceiling fan (Bearing No.6203 Z Type).

Supply and fix bearing for ceiling fan (Bearing No.6204 Z Type).

Taking out defective capacitor and supply and fix new capocitor of 2.5 MFD 230 volts with conector(capacitor holder with nut) including PVC clamps nuts , as approved make for various make of ceilling fan complete all as specified as directed.

Taking out defective capacitor and supply and fix new capocitor of 4 MFDas approved make for various make of exhaust fan complete all as specified as directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out in soft loose soil all as specified and directed

Returining, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm, all as specified and directed

Removing excavated soil to a distance not exce 50 mtr and deposited where directed at a level not exceding 1.5 mtr abvoe the starting point all as specified and directed.

Taking out of centrifugal pump set from pump foundation after disconnection from motor and transportation to workshop , dismantling the pump for repair/ overhauling incluiding cleaning of all parts of pump assembly throughly, including machine work of pump shaft inorder to obtain smooth finish including necessary polishing etc and installing back including helium gasket sheet not less then 1mm thick & to the entire satisfaction of engr-in -charge all as specified and directed. Make -Kirloskar, DSM -65-32A (Note:- Spares as required shall be measure & paid seperately against the relevant items).

Supply & fix Casing Wear Ring

Supply & fix shaft sleeve-

Supply & fix Inter Stage Ring-

Supply & fix Ball bearing DE SKF

Supply & fix Ball bearing NDE SKF

Supply & fix Bearing cartridge DE

Supply & fix Bearing cartridge NDE

Supply & fix Split Gland bush

Disconnecting electrically and disengaging the Monoblock pump set 3 phase 415 Vlots, 50 Cycles, 3 HP, 1440 RPM capacity , removing from foundations, overhauling thoroughly including complete varnishing and reinsulation replacement of DE /NDE bearings ,greasing, reassembling the monoblock pump set, mounting on the foundations, testing and commissioning all as directed. (note- Rewinding will be measure & paid seperately under relavant item of sch.)

Disconnecting electrically and disengaging the AC Squirrel cage induction motor 3 phase 415 Vlots, 50 Cycles,and taking out to local workshop submersible induction motor 30 HP for repair purpose including complete cleaning,varnishing ,insulation, replacement of DE /NDE bearings and greasing and including shifitng back to location as directed, installing, testing and commissioning after repair complete all as specified and directed. (Note- Rewinding will be measure & paid seperately under relavant item of sch.)

M&L for Rewinding the motor with super enamelled copper winding wire with appropriate same gauge of exsisting coil with similar class of exsisting insulation as recommended by manufacturer with high quality normex insulating paper applying best quality insulating varnish on stator/rotor windings drying them completely, testing the insulations as directed by engr -in - charge

Taking up or down GI Tubing 20 mm dia and connections including cleaning for refixing or removal to store.

All as per Item No 190.00 above but 25 mm dia.

All as per Item No 190.00 above but 40 mm dia

Supply and laying GI tubing 20 mm dia medium grade with all fittings and fixed complete laid in trenches.

All as per Item No 193.00 above but 25 mm dia.

All as per Item No 193.00 above but 40 mm dia.

Supply and fix in replacement Gun metal Globe or Gate valve 40 mm with iron wheel head, screwed both ends for iron pipe and fixed with required necessary GI fittings complete.

All as per Item No 193.00 above but 25 mm

All as per Item No 193.00 above but 20 mm

Taking up cast iron water mains incuding flanged rubber joints with spigot and socket ends and lead joint burning out and recovering lead of size 150MM.

Supply and laying cast iron pipes with spigot and socket ends, tyton ring, centrifugally cast, Class LA, in any length laid in trenches of size 150MM

Supply and laid spigot and socketed CI fittings. Such as bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged/spigot etc of size upto 150mm dia.

M&L for run lead joints complete for water mains with spigot & socket pipes and fittings, all as specified and directed. 150 mm Bore of pipe

Dismantling / taking out unserviceable sluice valve / NRV / Air release valves of size 80mm to 300mm bore dia by opening/cutting rusted nuts, bolts etc all as specified and directed.

Supply and fix in repair CI sluic valve both ends flanged and drilled, bonnet wedge stuffing box. Gland trust plate, hand wheel made out of grey CI, complete valve confirming to IS 14846 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.6 ISI marked complete all as specified and directed of sizes 150 mm dia

S&F CI sluic 100mm Make- Upadhaya valve both ends flanged and drilled, bonnet wedge stuffing box. Gland trust plate, hand wheel made out of grey CI, complete valve confirming to IS 14846 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.0 ISI marked complete all as specified and directed.

All as per Item No 205.00 above but 150 mm.

Supply and fix of non return valve flanged size 100mm of class 1.6 PN ,Make Kriloskar with flanged as per IS:5312 body ring -Bronze IS: 318 Gr gskit-natural rubber Flange drilling-IS: 1538 P 1.6 complete all as directed.

M&L draining water 50000 gallon capcity from OH reservoirs not exc. 21 Mtr head/staging, and cleaning internal portion of tank (bottom and walls) by means coir / wire brush etc. and wash the internal portion of tanks by using bleaching powder @ 25 grams per 1000 Ltrs of water after removing sludge and mud etc to a distance not exc 50 mtr and writing letters with white paint (date of cleaning and capcity of tank) on black painted surface of tanks all as directed by Engineer-in-Charge. (Note:- All safety eqpts and lights required for cleaning shall be arranged by the contrcator.)

M&L for draining water 50000 gallon capcity from UG reservoirs, cleaning internal portion of tank (bottom and walls) by means coir / wire brush etc. and wash the internal portion of tanks by using bleaching powder @ 25 grams per 1000 Ltrs of water after removing sludge and mud etc to a distance not exc 50 mtr and writing letters with white paint (date of cleaning and capcity of tank) on black painted surface of tanks all as directed by Engineer-in-Charge:- (Note:- All safety eqpts and lights required for cleaning shall be arranged by the contrcator.)

All as per Item No 209.00 above but 25000 gallons capcity.

M&L for Dehydration of tranformer oil, obtained from transformers/voltage stabilizer/OCBs etc. Dielctric strength shall not be less than 40 KV in 2.5 mm gap electrode after dehydration. Dehydration of transformer shall be carried out by using electrically operated dehydration machine and topping up/ replacement of unserviceable transformer oil complete all as directed. Note :- Filteration of transformer oil shall be off loaded position of transformer.

Supply and filling transformer oil of approved quality ISI marked for filling in transformer for topping up/ replacement in transformer comlete all as directed by Engr-in-Charge. Note: (i) Dielectric strength of transformer oil not less than 40 KV with 2.5mm gap. (ii) New transformer oil filled to transformer after filtration only, rate for filtration deemed include in the quoted rate. (iii) Oil supply for filling in a sealed barrel only.

M&L for cleaning/clearing of vegitation/ creepers on chain link fencing at the installations and disposing off as directed complete including painting of synthetic enamel silver paint on chain link fencing complete all as specified and directed by Engineer-in-Charge.

Supply and fix for DWC high density polyethylene pipes of dia size outer dia of 50mm, having outer side wall corrugated and inner surface plain confirming to IS 14930 (Part-I & II) for protection of underground cable laid in trenches/floor/fixed on pole/wall including coupler for pipe joint all fittings and clamps as required complete all as specified and directed.

Supply and fix for DWC high density polyethylene pipes of dia size outer dia of 90mm, having outer side wall corrugated and inner surface plain confirming to IS 14930 (Part-I & II) for protection of underground cable laid in trenches/floor/fixed on pole/wall including coupler for pipe joint all fittings and clamps as required complete all as specified and directed.

Supply, laying, in replacement of jointing and commissioning of cable XLPE insulated PVC sheathed, armoured 1100 Volt grade heavy duty with standard aluminium conductor through pipe/road crossing in ducts, on poles, trenches etc of cross-section area of size 240 Sqmm 3.5 core Note :- Exacation ,Eartwork,DWC /GI pipe etc shall be measued and paid Seperately

All as per Item No 216.00 above but cross section area 120 Sqmm 3.5 core

All as per Item No 216.00 above but cross section area 95 Sqmm 3.5 core

All as per Item No 216.00 above but cross section area 70 Sqmm 3.5 core

All as per Item No 216.00 above but cross section area 50 Sqmm 3.5 core

All as per Item No 216.00 above but cross section area 10 Sqmm 2 core

Supply and fixing in replacement of MCCB of 200A, 3 pole, 25 KA,

Supply and fixing in replacement of MCCB of 400A, 3 pole, 36KA,

Repair / Servicing / Overhauling to carry out maintenanace of diesel engine driving generating set of capacity 250 KVA (Crompton Greaves) . checking throughly the generator and finding out its faulty/defective parts and complete servicing /replacing defective spares of the DG set including provn of engine oil of apropriate grade, FIP Calibration, FIP Overhaul, Injector Calibration & Pressure Testing, injector overhaul, cylinder head repair & valve lapping, connecting rod bend Check & bush Setting, crank shaft grinding, crank case machining & bore checking, stator servicing, rotor servicing, radiator repair & servicing, air cleaner element repair & servicing, hose repair/new hose, makeup water line, pipe (thermostat to radiator inlet), hose: air cleaner, air cleaner element, clip for breather pipe, air pipe (CAC to inlet), lube oil inlet pipe, lube oil drain pipe, pipe: thermostat to radiator, pipe: radiator to pump inlet, fuel pipe: fuel filter to FIP, fuel pipe feed pump to fuel filter, hose for air cleaner, battery cable assembly of suitable size, upper and lower clamp for pipe, V belt, fuel pipe, high pressure pipe assembly, drain pipe for lub oil sump, hose for breather, setting bush, bush for injector, valve stem seal, rubber bush, steel bush, piston ring set, valve guide etc (if required) and labour for replacement of defective spares as required to make the DG set functional in all respect. After Repair/Servicing /Overhauling of the DG Set testing will be carried out upto the entire satisfaction of Engr-in-charge. Spare partes i.e oil filter, diesel filter, air filter will be measured and paid seperately.

Battery Cable Assembly 21 Sqmm

Copper Washer (14X18) 50.508.11.000.

Supply only Air filter assembly complete, suitable for 250 KVA DG Set

Supply only Oil filter assembly complete, suitable for 250 KVA DG Set

Supply only diesel filter assembly complete, suitable for 250 KVA DG Set

Supply only of Kirloskar Care Premium Genuine Oil 13 Liters Can82.060.10.0.13

Supply only of Coolant Premix 10 Ltr Can

S&F of TGY- Battery 180AH- Model 180H52 Part No : 1419511137

M&L for Earthing in replacement complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI strip 32 x 6mm, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 40 mm incl provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion”.

Supply and fixing of galvannised strip 32x6mm with saddles and fixing screws etc. complete all as specified and directed.

Supply, install, testing and commissioning in replacement of indoor type APFC panel board suitable for 20 KVAR (5+5+10), 3 phase 4 wire 415 Volts, 50 Hz and type tested at CPRI at 415 Volt factory fabricated in an approved factory having modern fabrication process powder coated in approved shard having thickness not less than 100 mircrons provided with suitable gasket to make it dust /vermin proof and general construction confirming to IS 8623793 comprising of the following :- Shell shall be made out of 2 mm thick CRCA sheet duly compartmentalized for each control gears, front & back openable single door system by keys. To accomodate incomer MCCB, Capacitors, Contactors and TPN copper busbar of rating not less than 1.5 times the rated capacity of the incomer MCCB. The TPN busbar shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size 'F' class insulators. The degree of protection for shell shall be IP-42. The bottom of the shell contains a ditachable plate having provn for entry of armoured cable of adequate size with glands. The dimension of the shell should be adequate to accomodate shell described below giving minimum 75 mm space all round. Provision of threaded earthing stud at bottom & lifting lugs of suitable size at top to lift the panel safely shall be made and carry the items.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 138009.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

SVT ENGINEERS AND CONTRACTOR. (BID ID -3400326)

MANOVANDANA CONSTRUCTION (BID ID -3398838)