Renovation of North Side Toilet at First floor of ALH-Hangar

Dismantling/removing tile work (for thickness of tiles 10mm to 25mm.) of in floors and in walls laid in cement mortar after disconnecting the electrical service and AC lines if any,including stacking material and disposal of dismantled materials up to a lead of 50 mtr etc complete as directed of Engineer-in-charge.

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : up to 10 mm thick.etc complete as directed of Engineer-in-charge.

Dismantling of flushing cistern ,washbasin,urinal , water closet of all types and sizes (C.I./PVC/Vitroeous China/ urinlas/ IWC/ EWC/ hnad wash basin ) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.etc complete as directed by Engineer-in-charge.

Dismantling doors, windows, ventilators and clerestory windows (steel , aluminum or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below.etc complete as directed by Engineer-in-charge.

Providing and fixing Ist quality ceramic glazed wall tiles of thickness range 8 mm to 10 mm conforming to IS: 15622 , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Make :Kajaria, Somany, Orient, H&R Johnson Tiles, Nitco, CERA or Equivalent etc complete as directed by Engineer-in-charge.

Providing and laying rectified Anti skid vitrified floor tiles of size 300x300 mm or more and thickness ranging from 8 mm to 10 mm of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick CementMortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry@ 3.3 kg/ sqm including pointing the joints with white cement andmatching pigments etc., complete. Make :Kajaria, Somany, Orient, H&R Johnson Tiles, Nitco, CERA or Equivalent.etc complete as directed by Engineer-in-charge.

Demolition of existing brick masonry work, built in cement mortar manually/ by mechanical means of any description at any height and position with requried scaffolding etc., including stacking of serviceable material and disposal of demolished/ unserviceable material (Except saleable materials) at a designated place from their debris will be lifted seperstely, all complete as directed by the Engineer-in-Charge.

Demolishing cement concrete manually/ by mechanical means/ machine cut including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or richer mix (i/c equivalent design mix)and including stacking material ,after making temporary proetction for existing service lines etc complete as directed by Engineer-in-charge.

Disposal of moorum/earth/building rubbish/ malba/ similar unserviceable,GI sheets,Aluminium windows, wooden doors, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, all complete as directed by Engineer-in-charge.

Brick work with 230mm/115mm thick common burnt clay machine moulded modular bricks of class designation 7.5 in brick work above plinth level including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand). etc coplete as directed by EIC.

Supply and fixing of WPC partitions and fixtures along with Door etc complete as directed by EIC.

Providing, applying and laying 12 mm thick cement plaster work in for internal/ External areas of Brick/ Solid block surfaces etc in CM(1:4) as per requirement as directed including preparation of surface by hacking etc., at all levels with necesary materials, labour, scaffoldings, curing, tools and tackles, plants etc., threading if any as directed, all complete as directed by the Engineer-in-Charge.

Supplying, mixing and placing plain cement concrete (1:2:4) (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate) of required thickness using 20 mm nominal size down graded hard stone/granite aggregate in accordance with IS 456 in posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., but excluding the cost of centering, shuttering and finishing, all complete as directed by the Engineer-in-Charge.

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. etc complete as directed by EIC.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture etc complete as directed by EIC.

Supplying, fabricating and fixing teak wooden plain, solid, straight chowkats and frames of doors, windows, partitions, wall panelling frames and other frames, wrought framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixed to wall or in position with hold fast lugs or with dash fasteners of required dia & length etc., all complete as directed by the Engineer-in-Charge. Note: Hold fast lugs or dash fastener shall be paid separately.

Providing, fabricating and fixing 30 mm thick flush door shutters for main entrance conforming to IS :2202 (Part I) Decorative type, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25 mm minimum depth on all edges and well matched commercial 3ply veneering with vertical grains or cross bands including ISI marked Stainless Steel butt hinges with necessary screws and face veneers on both faces of shutters and provision of rebates,suitable blocks for taking mortice locks, latches or other fittings, fitting to frames/chowkats etc., all complete as directed by the Engineer-in-Charge. Note : Fittings / hardware shall be paid separately.

Providing and fixing factory made UPVC glazed/white Ventilator casement window single panel with or without fixed panel with SS 304 friction hinges as per size and weight of sash,single point locking zinc alloy(zamak) powder coated handle, with using minimum frma eof (39mm X 39mm) & sash/mullion of (39mm x 60mm ) ( heioghtof the ventilator upto 1.2m) made of required shape & size as per CPWD specification,including uPVC extruded glazing beads,interlocks and inline sash adopter(where ever required) of appropriate dimension,EPDM,gasket,hardware, stainless steel (SS 304 grade) fasteners of minimum 8mm dia with counter sink head, comprising of matching polymide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 :Part 1 to 14 size for plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame,sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners,including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality,all complete as per approved drawing & direction of Engineer-in-Charge.Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by EIC.

Dismantling 15 to 40 mm dia G.I./CPVC pipe including stacking of dismantled pipes (within 50 metres lead) including making temporary arrangements for continuing ongoing services to toilets etc complete as directed by Engineerin-Charge.

Providing and fixing C.P. brass toilet paper holder of approved brand and fixing with screws,raw plugs etc.complete as directed by EIC.

Supply and fixing of bewel edge Mirror 1.5x .45 mtr etc complete as directed by EIC.

Supplying and fixing Under counter wash basin of minimum size as directed of approved make and colour including heavy duty pillar cock, C.P.Pillar cock 15mm dia, CP brass stop cock 15mm dia,,PVC inlet pipe with CP checknuts , CP coupling and P.V.C pipe for waste connection, etc., complete, with required anchor nut and bolts etc complete as directed by EIC.

Supplying and fixing White European water closet wall mount type of approved make and size not less than [540 x 480 x 450]mm conforming to IS 2556 with ‘P’ trap with one complete set of 5/6 Ltrs dual flush, Slim PVC concealed flushing tank with flushing cistern, PVC heavy duty seat cover auto close Seat Cover, 1 No of health faucet with 1.20m connecting pipe, 1 No angle Cock, 1 No Two way bib tap, 15mm dia good quality PVC inlet connector with brass check nut – 1 No. and providing CP pipe connection between closet and cistern with fittings, etc., all complete as directed by Engineer-in-Charge.Hindware italian collection / Roca / Kohler / Tote / American standard or equivalent - Star white colour etc complete as directed by EIC.

Providing and fixing white colour wall hung vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption approx.), having water inlet from back side, including fixing to wall with brackets embedded in cement mortar (1:3), connecting the waste pipe/waste coupling to floor trap with all necessary fittings and accessories like 32 mm dia semi-rigid PVC waste pipe(concealed in the wall) including PVC waste fittings, clamps etc all as per manufacturers specification and direction of Engineer-in-charge. Hindware italian collection / Roca / Kohler / Tote / American standard or equivalent - Star white colour etc complete as directed by EIC.

Providing, fixing, testing and commissioning trap ( S.S.floor trap ) of approved make with 100 mm inlet and 75 mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors , connection with PVC soil / waste pipe, necessary 150 mm thick cement concrete (1:2:4) for embedding the trap,etc coplete as directed by EIC.

Providing and fixing Concealed Chlorinated Polyvinyl Chloride (CPVC) pipes of approved brand, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing, necessary reducers, tank adaptors etc. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls etc as per direction of Engineer in Charge. Make : Supreme , Astral, Ashirwad,Finolex, Prince or Equivalent.etc complete as directed by EIC.

25 mm dia

32 mm dia

50 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 15mm nominal dia pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc..Make : Supreme , Astral, Ashirwad,Finolex, Prince or Equivalent.etc complete as directed by EIC.

Providing and fixing brass bib cock 15 mm nominal bore of approved quality etc complete as directed by EIC.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of 1000Litres capacilty , IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes. etc complete as directed by EIC.

18.51 Providing and fixing C.P. brass long/pillar body bib cock of 15 mm nominal bore, approved quality conforming to IS standards and weighing not less than 690 gms. etc complete as directed by EIC.

Supplying and Fixing louvered type Exhaust fans of 450 mm dia of approved make and type,etc complete as directed by the EIC Crompton Greaves/Havells / Bajaj/Usha/Orient or Equivalent.etc complete as directed by EIC.

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 450 mm dia PVC pipe conforming BIS-12818 and making good the same etc complete as directed by EIC.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete as directed by Engineer-In-Charge.

Supplying, laying, testing and commissioning the following dia PVC pipes of 6 kg/cm² SWR grade and of approved make with rubber ring joints conforming to IS 5382, jointed together with solvent, in trenches and floors, including all necessary fittings & specials, bends, branches, sockets, pipe cutting and wastages, cutting and making good the floors etc., all complete as directed by the Engineer-in-Charge

75 mm dia

110 mm dia

Providing and fixing bright finished brass handles of 125mm size with screws etc.complete as directed by EIC.

Providing and fixing bright finished brass 125x85x5.5 mm (heavy type) butt hinges with necessary screws etc. complete :

Providing and fixing bright finished brass tower bolts of 200x10mm (barrel type) with necessary screws etc. complete as directed by EIC.

Supply and fixing 18 mm to 25mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.etc complete as directed by EIC.

Supply nad fixing 32 mm dia PVC waste pipe Flexible type etc. complete at all levels.etc complete as directed by EIC.

Providing and fixing expansion hold fasteners with threaded dia of 6mm on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc all complete as per the architectural drawings and the directions etc complete as directed by EIC .

Supply , providing ,fixing on wall (concealed) and connecting 4 ways, 415V, TPN MCB Distribution board (double door vertical type with bus bar) of sheet metal enclosure of approved make for housing the MCB and commissioning of the same with all accessories including massion work (plastering ,wall cutting ,painting etc.) and as per EIC. ( 1 no common for both ladies and gents toilet )

Supplying, fixing, connecting from source and testing of 415V,63 Amps TP & Netural MCB of approved make:HAVELLS/CG/ABB as outgoing for SP MCB/RCCB circuits in DB as per EIC. ( for Lighting circuit & single phase Power circuit )

Supplying , fixing and connecting 16 Amps SP MCB of approved make: HAVELLS/CG/ABB as required, outgoing for RAW power socket & Lighting circuits in DB as per EIC. ( for Lighting circuit ,fan circuit & Power circuit )

Supply , fixing and commissioning using suitable mounting arrangements like Hanging rod (2 Mtr length or as per site condition) ,fixing hardwares etc of 36/40 watt slim linear LED batten type of length approx 4FT of Havells /GE / Philips /Bajaj/ Osram / CG /Surya make with inbuilt driver ,Non visible LED and necessary fixing hardwares,inter connections etc complete in all respects and as per EIC. ( For ladies and gents toilet)

Supply and fixing 1400 mm sweep 5 star rated BLDC ceiling fan with double ball bearing ,condenser & electronic step type regulator with on-off suitable for 240 Volt single phase 50 Hz AC supply complete ,erected in position with necessary flexible copper leads of required clolor and with canopy,down rod upto 1 mtr in length ,necessary rubber bushing,clamps nuts bolts etc complete in all respects. (one no for ladies toilet and one no for gents toilet)

Supply and fixing (on wall) 400 mm sweep, three blade ,220 volt, 50Hz wall mounted fan with copper winding motor and threaded regulator including massion work (plastering ,wall cutting ,painting etc.) or as per EIC .Make: Crompton/Bajaj/Orient /Havells. Color:White/Offwhite .( for ladies and gents toilet)

Supply and fixing (on wall) 300 mm sweep, three blade ,220 volt, 50Hz exhaust fan with copper winding motor ,frame and louvers including massion work (plastering ,wall cutting ,painting etc.) or as per EIC .Make: Crompton/Bajaj/Orient /Havells. Color:White/Offwhite . (For fixing at ladies and gents toilet )

Supply and providing point wiring consealed on wall/truss/cable tray /roof etc for ceiling lighting and wall lighting (one light points controlled by one switch and one fan point controlled by one switch) with FRLS 2.5 sqmm copper cable in suitable size PVS conduit/PVC CASSING &CAPPING including PVC conduit,bends,junction box,Tee,saddle,screws ,1.5 sqmm copper earth wire etc complete in all respects by tapping the supply from existing MCB DB including massion work (plastering ,wall cutting ,painting etc.). ( 6 nos light points ,2 nos mirror light, 2 nos fan points )

Supply and providing point wiring consealed on wall/truss/cable tray /roof etc for power points with FRLS 4.0 sqmm copper cable for phase and neutral in suitable size PVS conduit/PVC CASSING &CAPPING including PVC conduit,bends,junction box ,Tee, saddle ,screws ,1.5 sqmm copper earth wire etc complete in all respects by tapping the supply from existing MCB DB including massion work (plastering ,wall cutting ,painting etc.). ( For 5/15 power point wiring,3 nos for exhaust fan,2 nos for wall mounted fan ,2 nos for hand dryer and 3 nos spare point )

Supply,providing and fixing on wall , 12 module modular DMC /GI box with plate and frame including all accessories like dummy plate, screw etc complete for mounting switches of lighting and spare socket or as per EIC.(For fixing Light switch and one spare socket)

Supplying and commissioning of one way 5/6/10 Amps,1 module modular switch on the existing board for controlling light of approved make. ( For fixing on 12 module box)

Supplying and commissioning of 15/16/20 Amps 6 pin combined 2 module modular socket on the existing board for the power points of approved make.( fixing on switch board)

Supply ,fixing and connecting the modular type multipurpose switch socket outlet 3 pin 16 amps and one pin 6 amps controlled by one 16amps switch including GI box including massion work (plastering ,wall cutting ,painting etc.). (For 5/15 Amps 3 nos exhaust fan and 2 nos hand dryer power points)

HC/DGM(Maint.)-ACD/TN-99/2024

RENOVATION OF NORTH SIDE TOILET AT 1ST FLOOR OF ALH HANGAR.Cont. No: HAL/ACD/R-151/2024.

12.16 Lakhs

Description

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

MSME Registered Firm: YES/NO

Size Of Firm ( Infrastructure ): MICRO/SMALL/MEDIUM/LARGE

Owner Of Firm: SC/ST/WOMEN/SCST WOMEN/OTHERS

Address for correspondence:

PAN No.:

Contact details

Registered Contractor

Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs

I.T Returns for past 03 years

Related Document to be Uploaded to eProcurement Portal

Average annual financial turn over during the last 3 years, ending financial year 31st March 2024 [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rupees

Audited Report duly certified by the Auditor to be enclosed to support the turn over

ESI & PF Nos and GST Nos. with proof

Related Document to be Uploaded to eProcurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the final date of submission of tender.

Related Document to be Uploaded to eProcurement Portal

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please Enter details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please Enter details for Work No 2

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please Enter details for Work No 3

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Tender Document Cost and EMD details

Related Document to be Uploaded to eProcurement Portal

Validity Of the Offer

If not agreed please mention Validity Period

DECLARATION

DECLARATION

Related Document to be Uploaded to eProcurement Portal