SPECIAL REPAIR TO BLDG NO T 80 MT COMPLEX OF MH KHADKI UNDER GE MH AND RH KHADKI

Amount

Dismantling asbestos cement corrugated or semi corrugated sheets in roof coverings complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.

Supply and Fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, sunshades/chajjas etc fixed with self tapping screws complete all as specified and directed.

Supply and Fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ridge,eaves gutters with end stops,drop ends or nozzles etc as required at site,eaves board etc, fixed with self tapping screws complete all as specified and directed.

Supply and Fixing 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc. fixed flat or bent to a curve of any radius complete all as specified and directed..

Dismantling structural steel work including doors, gates but excluding framedtruss etc complete all as specified and directed.

Supply and Fixing Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates(Fe-410-W(Gde-E 250 quality B) complete all as specified and directed.

Material and Labour for Steel work in tubular pipes including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified and directed.

Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Material and Labour for anodised aluminium snap grid ceiling with 12 mm thick semi - perforated edge 60cmx60cm in ceiling board over GI grid prelude XL 24 mm grid main runner height 37mm and secondary runner height 30mm including 2.6mm/2.8mm GI wire suspenders of suitable length as per manufacturers instructions complete all as specified and directed.

Demolition of brick work or stone / boulders masonry built in cement mortar or cement lime mortar complete all as specified and directed.

Material and Labour for Brickwork with flyash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6. complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls and ceiling including racking out joints,hacking for key,scrubbing down with water complete all as specified and directed.

Material and Labour for rendering 15 mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 mixed with water proofing compound 3% weight of cement and finished even and smooth complete all as specified and directed. (Note :-WPC shall be measured & paid seprately)

Material and Labour for 10 mm thick plastering on fair faces of brickwork,or concrete surface in CM 1:6 with finishing the surface even and smooth(without using extra cement) complete all as specified and directed by Engr-in-Charge

Supply only Liquid water proofing compound complete all as specified and directed.

Material and Labour for Preparation of new plastered wall surfaces and applying two coats of oil bound distemper over a priming coat using chalk whiting, complete all as specified and directed.

Material and Labour for preparing newly plastered / unplastered surfaces of walls and priming with alkali reistant priming paint with two coats of cement based paint complete all as specified and directed.

Material and Labour for Preparation of old treated surface by complete removal of existing treatment and applying two coat of oil bound distemper over a priming coat using chalk whiting, on wall surfaces complete all as specified and directed.

Material and Labour for Preparation of old treated surface by complete removal of existing treatment and applying two coat of cement base paint over aalkali reistant priming,on wall surfaces complete all as specified and directed.

Material and Labour for complete removal of existing treatment,washing with water and bleaching powder solution and applying three coats of white wash on walls complete all as specified and directed.

Material and Labour for preparing unplastered surfaces of walls and applying two coats of synthetic enamel paint(ordinary tint) complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding(but not backing) removing rubbish off the premises complete all as specified and directed.

Material and Labour for Coloured ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 complete all as specified and directed.

Material and Labour for coloured / light coloured glazed ceramic tiles in vertical surface 300 x 200 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick cement plaster as backing coat in CM 1:4 complete all as specified and directed.

Material and Labour for non skid coloured/light coloured cermaic tiles 7mm to 8mm thick (square/ rectangular)area of each tile exceeding 0.06sqm but n.exc. 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer for laying floor tiles in CM 1:4 complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness laided bedded and pointed in cement mortar in floors, aprons complete all as specified and directed.

Demolition of Concrete of any description and in any position complete all as specified and directed.

Material and Labour for Machine cut kota stone slab flooring 20mm to 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Including screed beding layer of morter 15 mm thick in CM 1:6 and including rounding of edges complete all as specified and directed.

Material and Labour for Pre polished Chequered cement tiles tiles 30cmx30cmx 25 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and Labour for hardcore of broken stone or boulder n.exc 63mm guage deposited spread, leveled & well rammed including watering to a true surface in layers n.exc 25 cm thick etc complete all as specified and directed.

Material and Labour for 75 mm thick, PCC 1:4:8 type D-2 (using 40mm graded stone aggregate)as in sub base complete all as specified and directed.

Material and Labour for Machine pressed precast cement concrete interlocking paver blocks,coloured, glossy finish with any shape and size conforming to IS-15658-2006, 60mm thick, M-35 grade complete all as specified and directed.

Material and Labour for Sand filling under floors or in foundations including watering and consolidation and well ramming as required complete all as specified and directed.

Material and Labour for cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in kerb or mud stop,rounded or chambered edge complete all as specified and directed.

Material and Labour for PCC 1:3:6 type C-2 (using 40 mm grade stone aggregate), 75 mm thick as in plinth protection complete all as specified and directed.

Material and Labour for 25mm thick, levelling course of cement concrete type B-0 , 1:2:4 (12.5mm graded stone aggregate) as in flooring for laying tiles complete all as specified and directed.

Material and Labour for Pre-Cast RCC 1:2:4 nominal mix, type B1 using (20mm graded stone aggregate) as in cover slabs set in cement mortar 1:6 including necessary formwork complete all as specified and directed. Note :Reinforcement shall be measured and paid separately .

Material and Labour for TMT bars 6mm to 8 mm dia bars cut to length, bent to shape required including cranking, bending, hooking ends, and binding with mild steel wire not less than 0.9 mm dia confirming to IS complete all as specified and directed.

Supply and Fixing Mild TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde.E-250) complete all as specified and directed..

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Supply and Fixing Galvanised steel water tubing medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., fixed to walls/ceilings or laid in floors complete all as specified and directed for following bore of pipes.

15mm dia

20mm dia

Dismantling water tanks of capacity exc 500 ltrs and n exc 1000 ltrs and removing to store complete all as specified and directed.

Supply and Fixing rotational moulded polyethylene water storage tanks of capacity 1000 Ltrs ( cylindrical vertical with closed top) hoistsed and fixed in position complete all as specified and directed.

Supply and Fixing 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed ( Minimum weight 15 mm - 142 grams/20 mm - 210 grams . 25 mm - 455 grams) complete all as specified and directed.

Supply and Fixing in repairs vitreous china Squatting pan (Orissa pattern ) size 580 mm X 440 mm white (excluding fixing bolts flushing cistern and flush pipe)complete all as specified and directed.

Supply and Fixing in repairs PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe etc., and connected to water closet as per manufacturers instruction complete all as specified and directed.

Supply and Fixing in repairs stop valves cast copper alloy CP screwed down high pressure withcrutch or butterfly handle screwed both ends for iron pipe 15 mm dia complete all as specified and directed.

Supply and Fixing of PVC connections 15mm size with brass nut on both end washers of length 600mm complete all as specified and directed.

Supply and Fixing in repairs wash hand basin vitreous china white flat back of size 550 mm X 400 mm including PVC flexible waste pipe 32 mm bore 600mm long PVC connection pipe, chromium plated brass waste fittings 32 mm including 15 mm bore chromium plated pillar taps complete all as specified and directed.

Supply and Fixing in repairs 32mm dia waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

Supply and fixing Soap dish, vitreous China white, approximate size 160x160x90mm complete all as specified and directed.

Supply and Fixing 15mm dia pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.

Supply and Fixing 15mm dia bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and Fixing Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (including, flush pipe and waste pipe) complete all as specified and directed.

Supply and Fixing in repairs Brass chromium plated shower rose of size75mm with swivel joints including shower arm 15mm size, 195mm long with bend of 45 degree with flange for fixing with 15mm dia pipe complete all as specified and directed.

Supply and Fixing Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) complete all as specified and directed.

Supply and Fixing 32 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 Kgf/cm2 including making thread for fixing with waste coupling complete complete all as specified and directed.

Supply and Fixing PVC ( SWR) floor trap,75mm outlet dia plain with grating including joining with solvent cement complete all as specified and directed.

Taking down drain pipes (any size or pattern), including all fittings, Tee, bends,etc., including cleaning or refixing (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.

Supply and Fixing PVC (SWR) pipes 110 mm dia single sockets, in any length rubber ring joints, laid in trenches or in floor complete all as specified and directed.

Supply and Fixing PVC (SWR) pipes 75 mm dia single sockets, in any length rubber ring joints, laid in trenches or in floor complete all as specified and directed.

Supply and Fix in repairs PVC (SWR) bend any radius with access door suitable for 110mm dia pipes complete all as specified and directed.

Supply and Fix in repairs PVC (SWR) bend any radius with access door suitable for 75mm dia pipes complete all as specified and directed.

Supply and Fix in repairs PVC (SWR) Vent cowl suitable for 110mm dia vent pipe complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each including separating guard bars/grills/wire mesh complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh complete all as specified and directed.

Hacking out old broken glass ( any thickness, size, quality or description) from wooden frames, including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

Supply and Fixing Solid PVC door frame of size 50mm X 47 mm made out of 5mm plain colour PVC sheet rinforced with MS Square tube suppling and fixing in opening as per specification and drawing complete all as specified and directed.

Supply and Fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing Complete all as specified and directed.

Supply and Fixing 35mm thick factory made IInd class hard wood glazed and skelton door shutters ( two pannel) open rebated and prepared to receive glass/wire gauze etc, (without sash bars) edges offraming plain chamfered or rounded fitted with cut and mitred beads for receving glass etc sizes of members ofshutters as specified in SSR Part -Isection 8, clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed.

Supply and Fixing 30mm thick Plain, framed, Factory made panelled shutters 2nd class Hard Wood (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed.

Supply and Fixing Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (Fe-410-W(Gde-E 250 quality B)(exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

Supply and Fixing pressed steel frames made out of 1.25 mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc. complete as specified size of frame 165 x 60 mm complete all as specified and directed.

Material and Labour for cement concrete 1:3:6 type C-0 using 20mm graded stone aggregate for filling in pressed steel door frames complete all as specified and directed.

Supply and Fixing Butt hinges, 100mm size medium weight cold rolled mild steel complete all as specified and directed.

Supply and Fixing Aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed.

Supply and Fixing aluminium anodised barrel tower bolts, extruded section of size 200mm long complete all as specified and directed.

Supply and Fixing aluminium handles cast type anodised 100 mm size complete all as specified and directed.

Supply and Fixing aluminium handles cast type anodised 150 mm size complete all as specified and directed.

Supply and Fixing aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

Supply and Fixing 140 mm over all length of cover plates floor door stopper of aluminium alloy body and tongue, anodised with hard drawn sttel pspring, fixed I floor complete all as specified and directed..

Supply and Fixing Steel windows double shutter with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Supply and Fixing in repairs stainless steel wire cloth , 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed..

Supply and Fixing sheet glass 4mm thick plain ordinary quality and glazing with oil putty/wooden beads as directed in squares n.exc 0.50 sqm each pane complete all as specified and directed..

Supply and Fixing Securing glass of any description in existing Metal frames glazed with putty/beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work complete all as specified and directed.

Material and Labour for applying two coats of Synthetic enamel paint for wooden surfaces over a coat of pink primer including necessary preparation of new wooden surfaces of any description exc. 10cm width or girth complete all as specified and directed..

Material and Labour for applying one coats of Synthetic enamel paint for wooden surfaces including necessary preparation of old wooden surfaces of any description exc. 10cm width or girth complete all as specified and directed..

Material and labour for applying one coats of synthetic enamel paint including preparation of old steel surfaces any description exc 10cm width or girth complete all as specified and directed..

Material and labour for applying two coats of synthetic enamel paint over a one coat of Zinc primer including preparation of new steel surfaces any description exc 10cm width or girth complete all as specified and directed..

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors complete all as specified and directed.

Material and Labour for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including medium grade, PVC conduit minimum 20 mm dia concealed in wall/floor/ceilling and accessories etc, ISI marked with mild steel/pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally, with modular white cover plate with frame for mounting modular switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly completed all as specified and directed by Engr-in- charge for the following :-

One light point controlled by one way switch

One Fan point controlled by one way switch

One 3 pin 5 Amps socket outlet on independent board.

One 3 pin socket outlet 5 Amp on same board with other switches

All as per item No 94 here-in-before but wiring with 4.0 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated but unsheathed single core multi stranded PVC insulated unsheathed copper conductor FRLS cable 1100 volts grade for 16 Amps power point on independent board and 4.0 sqmm cable as earthwire complete all as specified and directed.

Supply and Fixing switch piano type, 230 volts, one way 6 Amps complete all as specified and directed.

Supply and Fixing in socket outlet 2 in 1, 3 pin, 6 Amps shuttered flush type complete all as specified and directed.

Supply and Fixing switch piano type 230 volts one way 16 Amps complete all as specified and directed.

Supply and Fixing PVC ceiling rose surface type three terminals type including square plastic box of suitable size, required PCC work for making surface good complete all as specified and directed.

Supply and Fixing fan regulator electronic step type suitable for 1200 mm ceiling fans complete all as specified and directed.

Taking down old unserviceable Tube light fitting of any type and Supply and Fixing wall mounted LED tube light fitting extruded aluminium housing high quality indoor batten LED tube 20 watt colour temperature 6500 K (4 feet long) lumen 2000 -3000, PF> 0.95, THD less 10% diffused connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement complete all as specified and directed. Make : PHILIPS/ HALONIX/ HAVELLS

Supply & fix Highbay light made of PDC aluminium housing with direct modular IP lens, Potted driver, 10 KV SPD, IP66, 150 Watt with system efficacy of 120lm/ watt suitable for 240 V, 50 Hz complete all as specified and directed.

Material and Labour for submain wiring with replacement with approved colour code/as per IS (Red,black & green for single phase) circuit with Two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 4.00 Sqmm (FRLS) in PVC concealed conduit including one run of PVC insulated multistranded copper conductor nominal cross sectional area of 4.00 Sqmm (FRLS) of contineous earth wire green in colour complete all as specified and directed. (Note :- Two runs of 4.00 Sqmm cable & one run of 4.00 Sqmm cable green colour with one run of PVC concealed conduit shall be paid as one unit length)

Material and Labour for sub main wiring but using two single core multistranded PVC insulated copper conductor of size 6 sqmm for phase & neutral 1100 volt grade drawn in PVC concealed conduit medium grade, ISI marked including 6.0 Sqmm. PVC multi standard cable in green colour for continuous earthing including taking down old submian wiring and making good the disturbed surfaces of wall /floor/ ceiling to match with existing surfaces complete all as specified and directed. Note : Three runs of 6 Sqmm PVC cable (P N & E) and one run of PVC conduit medium grade of suitable size shall be measured as one length.

Supply and Fixing sheet metal enclosure MCB DB VTPN 04 way with 200 Amps rated bus bar 415 volts double door with magnetic locking system complete all as specified and directed. Make- Standard, Indoasian,L&T

Taking down defective vertical TPN DB Supply and Fixing Vertical TPN DB IP-43 metal door 6 way powder coated provided with insulated vertical phase bus bars, neutral bar with shroud earth bar sticking saddles, color coded interconnecting wire set cable ties blanking plates and circuit identification labels with provision for MCCB 4 pole as incomer and SP/TP MCBs as outgoings (MCCB measured separately) including making good the disturbed surfaces complete all as specified and directed.

Supply and Fixing for sheet metal enclosure MCB SPN DB 4 Way with 200 Amps rated copper bus bar 240 volts 50 Hz AC Supply Double door with magnitic locking system complete all as specified and directed.

Taking down defective distrubtion board including MCBs and wooden boards and Supply and Fixing grouting on stone/brick building distrubtion board factory made SPN 8 way in 240 volts, double door type suitable for fixing MCB complete all as specified and directed. Note: MCBs measured and paid separately.

Supply and Fixing MCB SP 6-32 amps , 240 V, 50 Hz, 'B' series breaking capacity 10 KA complete all as specified and directed.

Supply and Fixing MCB SP 40 amps, 240 V, 50 Hz, 'B' series breaking capacity 10 KA complete all as specified and directed.

Supply and Fixing for MCB TPN rated capacity 63 Amps,C curve, 415 volts breaking capacity 16 KA complete all as specified and directed. Make : Legrand ,C&S, Indo Asian

Supply & fix MCCB 100 Amp rating 415V,16KA, 4 Pole suitable for mounting in VTPN complete all as specified and directed.

Supply and Fixing MCB SPN 32 Amps C curve 10 KA 240 Volts AC Supply complete all as specified and directed.

Material and labour in repairs for GI earthing complete with Galvanized earth plate 600 mm x 600 mm x 6 mm, 3.15 mm thick burried directly in ground (earth pit not less than 2.25 mtr below normal ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level connected to GI earth lead wire of size 4.0 mm by means of bolts check nuts and washers of brass/ bronge all as shown in electrical plate no 5 connecting to earthing test point all as specified and indicated and testing on completion including excavation earth work drilling holes for electrode PCC pit in PCC 1:2:4 type B1 using 20mm graded stone aggregate, RCC precast cover 1:2:4 type B1 using 20mm graded stone aggregate, GI pipe 40 mm dia (medium grade) and MS funnel, wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal in black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as per the sketch given in particular specification, GI wire suitable size and length for continuity earth wire from test point to main distribution Board etc complete all as directed and specified by Engr-in-Charge.

Material and Labour for cutting, chiseling, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 20 cm girth complete all as specified and directed.

Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces with cement plaster 1:4 complete all as specified and directed.

M/S KISHAN CONSTRUCTION (BID ID -3314536)

N AND G CONSTRUCTION (BID ID -3314291)

Sunrise Traders (BID ID -3313697)

A.S.ENTERPRISES (BID ID -3314225)

UNIQUE ENGINEERS (BID ID -3314407)

JP ENTERPRISES (BID ID -3308012)

ShreHari Civil Enginneering and Contractors (BID ID -3314358)

S.R.M.K Enterprises (BID ID -3308210)

M/S JAYCONSTRUCTION CO (BID ID -3314533)