Road Construction work on left side Patri of Inayatpur Rajwaha Km. 1.800 to 13.400 Under RSN in Distt. Gautambudhnagar

Amount

Clearing jungle including up rooting of rank, vegetations grass, push, wood tress and samplings of grith upto 30 cms. Measured at a height of 1 M above ground level and removal of rubbish up to a distance of 50M. Out side the periphery of area cleared. SI.No. 259(i) Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M. in depth and earth work in embankment to be in 20 cm.layers including ramming and dressing the surface to required levels and slopesand also including lift upto 1.5 metre (5fts) lifts and lead upto 30 m.including all materials,labour,T&P and machinary plant as per direction of engineer in charge (SI. No. 253a) Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

Excavation in foundation in ordinary soil (loam, clay or sand) including lift upto 1.50M.and lead upto 30M.and including filling watering and ramming of excavated earth into trenches or into space between the building and the sides of foundation treches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30M.form the foundation trenches.( SI.No. 251a) Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

Construction of Embakment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 301.5 and MORD Clause 305 . Including all Material T&P labour etc. (Lead up 6 Km.) Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

Construction of granular sub-base by providing well graded material, (For Grading I) spreading in uniform layers. Mixing by mix in place method with rotavator at OMC, and compecting with smooth wheel roller to achieve the desired density, complete as per MORD Technical Specification clause 401 Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Wet mix plant), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 and as per direction of E/I Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. But excluding GST.

Brick edging on both side of the road of first class brick 7 cm. wide 11 cm. deep laid with mud mortar including labour & supply of bricks finished to the required template and in proper alignment and also including dressing and ramming the excavated earth as directed by te Engineer -in-charge. SI. No. 765 Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

Providing and applying primer coat with bitumen emulsion (SS-2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502. Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

Providing and applying tack coat with (VG-10) Bitumen using bitumen distributor at the rate of 0.25 kg per sqm on the prepared surface cleaned with Hydraulic broom as per Technical Specification Clause 503. Including cost of bitumen. Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using VG-10 bitumen @ 1.46 kg/sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in Hot Mix plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat as per Technical Specification Clause 508. including cost of bitumen.(Mechnical mean) Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

Providing and laying Seal coat sealing the voids in a bitumenous surface laid to the specified levels, grade and cross part using Type-C Seal Coat.(with approved graded 6.7 mm grit passed from 9.5 mm and retained on 2.36 mm sieve) As per MORD Technical Specification clause 510 Including cost of bitumen ( by Mechnical mean) Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design over a prepared sub base with 43 grade (OPC) cement or any other type as per clause no.1501.2.2 M-30 (Grade),Course and fine aggregates confirming to IS 383, maximum size of coarse aggregate not exceeding size of 25 mm mixed in a concrete mixture of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including leveling the formwork as per drawing). Spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying deboning strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joint , admixture as approved, curing of concrete slabs for 14-day, using curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Specification without dowel bar. New Item . Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

Supply and laying of NP-3 class 350mm dia Hume pipe for culvert including cost of hume pipe, cartage, fixing of proper alignment. including all type of taxes,cess ,toll etc but excluding G.S.T.

Cement concrete with 4 cm gauge approved stone ballst, coarse sand cement in proportion of 8:4:1 in foundations and under floors, including supply of all materials, labour,tools & plants , labour cess etc. required for proper completion of the work. As per direction of E/I. Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

Providing concrete for plain/reinforced concrete(1:3:6) in open foundation complete as per drawding and technical specification clauses 802, 803, 1202 &1203 As per direction of E/I. Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

Providing concrete for plain/reinforced concrete (RCC grade M-20) in open foundation complete as per drawding and technical specification clauses 802, 804,,805,806,807, 1202 &1204 As per direction of E/I Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

M.S. (tor steel fe 500) in plain work such as R.C.C. or R.B. work including bending for proper shape as necessary including bending for proper completion of the work and including supply of all steel & wastage, bend, hooks and authorised overlapping shall be measured. As per direction of E/I. Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

Structural Steel work riveted. bolted or welded in built up sections, trussess and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all compelete. DSR 2018 10.2 Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

M-150 Brick work in cement mortar in proportion of 1:4 ( 1cement and 4 Coarse sand) FM 2.20 in foundation & plinth including supply of all material,labour, T&P etc required for propercomletion of the work.SOR 305a. Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) As per DSR No. 13.4.1. Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

Providing and fixing 110 mm diameter unplasticised Rigid PVC pipes conforming to IS : 13592 Type A, for weep hole in RCC Retaining wall. Including supply of all materials, labour and T&P etc. Required for proper completion of work. As per direction by Engineer Incharge. Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

Type - A, "W" : Metal Beam Crash Barrier Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810. (LKO SOR.) Including all taxes, material, T&P, Machinary, royalty, labour cess all taxes complete. As per MORD technical specification but excluding GST

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer / Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends , letters , numerals and borders etc should be as per MoRTH specification No-801.3.7 . P xi). 80 cm x 60 mm rectangular with diffinitation plate (20cm x 60cm). Excluding GST.

Krishna Infratec

M/S SHANTI ASSOCIATES

M/S DIMANIYA BUILDERS

Jeet Construction

Raja Infraconstruction Pvt Ltd