Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.4 LAccepted-AOC URDHAN BASTI PO URDHAN DISTT CHHINDWARA M P PIN NO 480441 | CHHINDWARA | CHHINDWARA | M P | 480441 | ₹5.4 L | L1 | Accepted-AOC Bidder is L1 and has quoted lowest item rates overall |
| 2 | L2₹5.9 LRejected-Finance | ₹5.9 L | L2 | Rejected-Finance Quoted higher rate |
| Sl No | Description | Qty | Unit | Intelligent Works and Services L2 | SILEET ENTERPRISES L1 |
|---|---|---|---|---|---|
| 1.00 | Drilling of perfectly vertical bore hole of a diameter to receive 125 mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 125 mm nominal diameter M.S./ G. I. /U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete. in all types of rocks. | 300 | Mtr | 480 ₹1.4 L | 650 ₹1.9 L |
| 2.00 | Supply of I.S.I. marked UPVC casing pipe conforming to IS 4985/2021 (with up-to-date amendments): Screen pipes with ribs 125 mm dia | 150 | Mtr | 630 ₹94,500 | 350 ₹52,500 |
| 3.00 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).200 mm dia | 1 | No | 500 ₹500 | 1,000 ₹1,000 |
| 4.00 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp | 1 | No | 400 ₹400 | 500 ₹500 |
| 5.00 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200mm dia. | 1 | each | 400 ₹400 | 1,000 ₹1,000 |
| 6.00 | Providing and fixing to filter and lowering to proper levels 50 mm G.I. pipe for tube well including cleaning and priming the tube well. | 150 | Mtr | 475 ₹71,250 | 350 ₹52,500 |
| 7.00 | Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make. 6.0 sq.mm multi strand. | 200 | Mtr | 220 ₹44,000 | 105 ₹21,000 |
| 8.00 | Supplying &installation of approved make required capacity 3 phase, 50 Hz, 415V, open well submersible pump, with control panel starter with dry run protection, single phase preventer, connections, etc. as required as per
specifications but excluding pipe and connection cable. 5.0 HP head metre 12-28, discharge LPM 1200-390 | 1 | each | 50,000 ₹50,000 | 60,000 ₹60,000 |
| 9.00 | Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 75 mm dia | 120 | Rmt | 175 ₹21,000 | 120 ₹14,400 |
| 10.00 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank | 10,000 | Ltrs | 7 ₹70,000 | 6 ₹60,000 |
Tender Value
₹7.0 L
EMD Value
₹8,800
Closing Date
20 May 2025, 5:00 pmClosed
Staff Officer (Civil), Pench Area
Staff Officer (Civil), AGM Office, Pench Area, P.O. Parasia, Dist. Chhindwara (M.P.) 480441
Repairing and deepening of existing borehole near Mathani UGM and providing due inputs to facilitate availability of usable water at Mathani village under Pench Area.
2025_WCL_335024_1
pe3350-civ-s-e007-2025-26
Open Tender
Civil Works - Others
24 days
NEHARIYA SUB AREA
As Per NIT
3 documents required · 3 mandatory
₹8,800
4 Apr 2026
6 May 2025
21 May 2025
6 May 2025
20 May 2025
6 May 2025
6 May 2025 - 13 May 2025
Amount
Drilling of perfectly vertical bore hole of a diameter to receive 125 mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 125 mm nominal diameter M.S./ G. I. /U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete. in all types of rocks.
Supply of I.S.I. marked UPVC casing pipe conforming to IS 4985/2021 (with up-to-date amendments): Screen pipes with ribs 125 mm dia
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).200 mm dia
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200mm dia.
Providing and fixing to filter and lowering to proper levels 50 mm G.I. pipe for tube well including cleaning and priming the tube well.
Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make. 6.0 sq.mm multi strand.
Supplying &installation of approved make required capacity 3 phase, 50 Hz, 415V, open well submersible pump, with control panel starter with dry run protection, single phase preventer, connections, etc. as required as per specifications but excluding pipe and connection cable. 5.0 HP head metre 12-28, discharge LPM 1200-390
Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 75 mm dia
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Total impact of GST for the purpose of CTC
Intelligent Works and Services (BID ID -1153838)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 1.62 MB
BOQ_347302.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid