LOT 2 Restoration work of 9 No. Type-A Houses and Boundary Wall in Canal Colony Bulandshahr.

Amount

12 mm thick cement plaster with cement mortar 1:4 i/c all material labound and T&P etc. complete.

Dismantling existing old plaster including disposal of refuse with in distance of 60 M.

Scrapping old white or colour wash including disposal of refuse within 60mtr.

Distempering with dry distemper of approved brand and manufactures two coats and of required shade on undecorated wall surface to give an even shade over and including priming coat of whiting after thoroughly brushing the surface free from mortar dropping and other foreign matter including the preparing the surface even and sand papered smooth.

Finishing of wall with water proofing cement paint of approved make such as super Snowcem , supreme quality of required shade on on old surface with out priming.

Brick work with Ist class (M-100) in 1:4 cement mortar up to 3 M. lift & 60 M. lead of materials I/C all cost of materials Labour T&P

Supply and fixing 35 mm thick commerical flush door shutters conforming of I.S. 2022 part-1(1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts,locks handles and springs ( excluding cost of fittings)

Supply and fixing Galvanized Mosquitos proof heavy quality iron wire gauge or expended metal heavy quality over window and including supply of C.P. teak wood batten 8xcm.x1cm. (3"x3/8")/flat iron 25 mmx4mm. including Supply of necessary screws all materials, labour, Tools & plants etc. required for proper completion of work.

Providing and fixing glazing in Z-section windows, doors, ventilator shutters and partition etc, with Glass putty/beading etc. complete. (4mm)

Dismantling doors and window chaukhat with hold fast including stacking material with in 60M.

Providing and fixing 1 mm thick m.S, sheet sliding shutters with frame and diagonal braces oh 40x40x6mm (1(1/2")x1(1/2")x1/4") angle iron 3.15mm (1/8") gusset plates at the junctions and corners, hooks at top 25mm (1") dia pullys at bottom, 40x40x6mm (1(1/2")x1(1/2")x1/4") angles and T iron guides at top and bottom respectively including locking arrangement with handles etc complete and apply one priming coat of approved lead paint (no material shall be issued be issued by deptt.)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer ) , with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement : 4coasre sand ), jointing eith grey cement slurey @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigment etc, complete. Size(600X600)mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer ) , with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement : 4coasre sand ), jointing eith grey cement slurey @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigment etc, complete. Size (1000X1000)mm

Providing and laying 25 mm thick cc floor (1:1.5:3) with out base concrete with neat cement fineshing i/c all material labour T&P etc complete

2.5 cm thick and of Cement Concrete consisting of 1 part cement,1½ part approved coarse sand and 3 parts approved 10 mm. graded stone grit and including water proofing material as ordered by the Engineer-in-charge in the proportion as specified by the manufacturer. as per PWD Meerut SOR Ch. 7 Item 361

Centring & shuttering for R.C.C. work including cost of Centring & shuttering up to 3.0 m. /sqm.

R.C.C. 1:1.5:3 with cement,coarse sand and stone gritt including all material,labour charge,etc. Complete.

Reinforcement steel for RCC work including Bending, binding, cutting and placing with binding wire including cost of material and labour etc complete / MT

Fabbrication mild steel iron work of smaal size and sections such as grating and chaukhats, roof work including where necessary and fixing bolts as required for completion of work .

Provinding and fixing 18 mm thick Granite Gange saw cut), mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1 cement : 4 coarse sand ), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high glossy finish etc. complete at all levels. (b) Slab area Above 0.50 sq.m.

Providing edge moulding to 18 mm thick Granite stone, including machine polishing to edge to give high glossy finish etc. complete as per desigen approved by Engineer-in- charge.

Supply and fixing of Kota stone in floring 20 mm thick and joint filled with 12 mm cement and coarse sand with approved colouring materials to be given shade with 20mm base coat (bedding) of 1:4 cement & coarse sand morter and polished by hand or mansoon polish or other approved polish including supply of all materials, labour,Tools & Plants etc. required for proper completion of the work.

S/F 6mm (1/4") thick china white glazed tiles on walls or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement jointed and polishing complete including supply of all materials, labours required for proper completion of the work

Laying of I saped Interlocking tiles of thickness 60 to 100 mm (Compressed strength not less than 30 Mpa and weight 4.50 kg.) including 25 mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work, including VAT. -(80mm 9 Rubber moulded Gray)

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos / Lindane E.C. 20% with 1 % concentration

Earth work in foundation in dry ordinary soil ( loam clay or sand) including lift up to 1.50 meter and lead up to 30 meter and including back filling, watering and ramming of excavated earth in to trenches or into the space between the structure and the sides of foundation trenches or into the plinth with removal and disposal or surplus earth as directed by the Engineeer-in-charge uo to a distance of 30M from the foundation trenches. ( Building)

Dismantling C.C. or brick or granolithic floor including base concrete and including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters.

Dismentaling of brick work i/c cost of all labour T&P lead and lift etc. required for proper complition of work as per direction of Engineer in charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid 10 letre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (a) W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing water closet squatting pan( Indian type W.C. Pan) with 100 mm sand cast Iron P or S Trap, 10 letre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. Pan of size 580*440 mm with integral type foot rests

Providing and fixing wash basin with C.I. breckets, 15mm C.P. brass pillar tap, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash Basin size 550×400 mm with a pair of 15mm C.P. brass pillar taps

Providing and fixing Stainless Steel grating of approved quality and colour. (100 mm )

Supplying & fixing P.V.C. connection 600mm long with two brass units (15mm dia)

Supply and fixing of UPVC S.W.R. Gully trap confirming to IS-14735 size 150×110mm dia of self cleaning design including fixed brick Masonry chamber 250×250×250mm .size i/c supply and fixing of CI cover with frame wait not less then 4.50Kg. & CI grating.150×150mm complete in all respects .

Providing and fixing PVC pipe confirming to IS make working pressure 6 Kg./Cm2 incuding testing labour T&P and all complete fittings (75mm dia)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. For 15 mm nominal outer dia pipes ( Rate Rs. / RM)

Same as item no 36 but for 20 mm nominal outer dia pipes ( Rate Rs. / RM)

Same as item no 36 but for 25 mm nominal outer dia pipes ( Rate Rs. / RM)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings, with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External Work 25 mm dia nominal outer dia Pipes

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions:(b) 45 cm lengthi) 15 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing 600×450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Supplying and fixing 300 litres of Sintex or euivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position i/c all materials, labours and T&P etc. for proper completion of the work. Tank Should be ISI marked, Sintex or Equivalent and I/C all taxes

Providing and fixing Stainless Steel A ISI 304 (18/8) Kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, inlcuding painting of fittings and brackets, cutting and making good the walls wherever required.

Supply and fixing of UPVC S.W.R. pipe type-B conforming to IS-13592 including jointing the pipes with rubber ring, lubricant and UPVC SWR cuplar confirming to IS- 14735. Also including excavation of trenches cutting of walls and holes and repairing the walls, floors, and refiling the trenches as before, but excluding supply and cost of other fittings such as elbow bead, tee and Y- tee including supply of all material labour adn t&P Required for proper completion of the work.

Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface, complete with 14 SWG copper earth continuity wire,GP Box ,piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect, as directed .Same as in item 121 (B)) but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit

Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite sheet etc, complete in all respect. Same as in item 123 (B) but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit.

Wiring Point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface, complete with 14 SWG copper earth continuity wire , GP Box and piano type switch and socket etc.complete in all respect. Same as in item 124 (B) but in PVC conduit with 1.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit

Wiring point for call bell with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface, complete with 14 SWG copper earth continuity wire ,GP Box , and piano type bell push or 2 pin socket etc. complete in all respect. Same as in item 125 (B) but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit.

Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit on surface, with one number 14 SWG copper earth continuity wire, complete in all respect. As in item no. 211 (B) but in 20mm dia heavy duty (2mm thick) PVC conduit with one number 2.5 sq. mm. multistrand copper conductor cable as earth continuity wire drawn in conduit.

S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve CAT A

S&F of 63 Amp. TP MCB (10 KA) C Curve CAT A

S & F surface/Flush mounting 4ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A

S&F of 32 Amp. four pole change over switch on 25mm x 25mm x 3mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.

Supply & fixing of wall roof type service bracket of 50 mm dia 4 Meter long fabricated from class "B" G.I. pipe complete with two bends, sockets, wall clamps. 7/3.15 mm G.I. stay wire, stay insulators etc. complete in all respect.

Erection and testing of ceiling fan and regulator etc.excluding supply of down rod, complete in all respect.

Supply and fixing of fan hook fabricated from M.S. rod for ceiling fan each.

Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. For 10 sq. mm $ Core

Same as item no 62 but for 70 sq. mm 3-1/2 core

Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing (This will apply for earthing of poles also).

Supply and fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 30Watt. to 40 Watt. Confirming to IP 66 protection complete in all respect. CAT-AA

Supply and fixing of call bell of approved make on polished MDFEG/ Teak ply board including making connections etc. complete in all respect.

Rakendra kumar mishra (BID ID -4916108)

Arvind Kumar (BID ID -4919974)

Sharma Enterprises (BID ID -4914704)

Chattar Singh Construction Co. Noida (BID ID -4919475)