GE863/EWS-T-15 OF 2023-24

Amount

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M & L for rendering 12mm thick in CM (1:6) on brick work or concrete surfaces finishing even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4 using WPC 3% by weight of cement and finished even and smooth (without using extra cement) complete all as specified and directed. Note:WPC shall be measured and paid separately.

M & L rendering 15mm thick on fair faces of stone work in CM 1:4 including finishes surface even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15cm thick complete all as specified and directed.

Material and labour for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor finished surface even and smooth with out using extra cement complete all as specified and directed .

Material & labour for 50mm thick cement concrete type C2, 1:3:6 (using 40mm graded agg) as in plinth protection complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregateas in floor, including rough finished without using extra cement complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18Sqm as in floor laid over and including 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match colour tiles including dismentaling of old tiles complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.18 Sqm but not exc 0.38Sqm as in floor laid over and including 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cment to match colour tiles including dismentaling of old tiles complete all as specified and directed.

M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed in CM 1:6 as in floors including dismentaling of old tiles complete all as specified and directed.

Dismantling of floor,hearth or wall tilling including cement mortor bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for Glazed ceramic tiles in vertical surface 350x250x7mm/ 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cm 1:4 including dismentaling of old tilescomplete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed.

Dismantling of timber scantlings under 40 sq cm in section in any position complete all as specified and directed.

M&L for 2nd class hard wood plain fillets,square,rectangular,or triangular in section clean sawn exc 13 sqcm and n exc 25 sqcm secured with nails or brads complete all as specified and as directed.

M & L 6 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in ceiling complete all as specified and as directed.

M&L for 9mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face has decorative veneer fixed to timber frame work complete all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting, Pre painted galvatume aluminium Zinc Coating any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S & F for 0.63mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275. complete all as specified and directed.

All as per item no 21 above but except sheeting (any thickness).

S & F 0.63 mm thick Plain Galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and directed.

S & F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutter (without taking off shutter from the frame) and removing complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sqm but not exceeding 4 sqm each but with shutter (without taking off shutter from the frame) and removing to store complete all as specified and directed.

Taking down Shutters of any description n exc 1 sq. m each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each complete all as specified and directed.

S & F Second class hard wood plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 35mm Second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to Chowkat complete all as specified and directed.

S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed.

S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. for windows and ventilators etc complete all as specified and directed.

S & F Stainless steel wire cloth, 0.63 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples.

Hacking out old glass (any thickness,size,quality or description)from wooden frames or stone,concrete or brick surrounds ,glazed with putty or fixed with beads complete all as specified and as directed.

Supply and Fix plain sheet glass/pin headded glass of 4 mm thick in Squares not exceeding 0.50 Sqm in each pane with oil putty and clips complete all as specified and directed.

M & L for Preparation surface of wood and wood based material, treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each complete all as specified and directed.

M & L For , treating small articles such as stop, covers, gully gratings, holdfasts, etc., area n exc 0.1 sq. m each, complete all as specified and directed.

Supply and fixing mild steel works in bands, straps, supports, stays, bolts, hooks, hold fasts etc, similar articles conforming to Fe-290.Gde-E-165, complete all as specified and directed.

M & L for providing cement concrete Type C1 1:3:6 using 20mm graded stone aggregate as in fixing of Hold fast complete all as specified and directed.

Supply & fixing Aluminium barrel tower bolt of 100mm long stove enamelled black with bright bolt complete all as specified and directed.

Supply & fixing Aluminium barrel tower bolt of 75 mm long stove enamelled black with bright bolt complete all as specified and directed.

S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of truded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F 75 mm long extruded mild steel anodised Butt hinges with galvanized mild steel complete all as specified and directed.

S & F 100 mm long extruded mild steel anodised Butt hinges with galvanized mild steel complete all as specified and directed.

Supply & fixing Aluminium alloy pressed handle oval type stove enamelled black of 125mm long fixed with screw to shutter complete all as specified and directed.

Supply & fixing Aluminium alloy pressed handle oval type stove enamelled black of 75 mm long fixed with screw to shutter complete all as specified and directed.

Supply and fixing 2nd class hard wood small fittings, such as brackets of any type latch and hinge blocks, shaped door and window stops and the like including all necessary labours ,articles not exc 200 cu.cm each, complete all as specified and directed.

Supply and fixing 2nd class hard wood small fittings, such as brackets of any type latch and hinge blocks, shaped door and window stops and the like including all necessary labours ,articles exc 200 cu.cm but not exc 500 cu.cm each, complete all as specified and directed.

S & F 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for preparing New plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of chalk whiting on plastered surface complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint with alkali resistant priming paint complete all as specified and directed.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed.

M & L for preparation of new painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint (first quality) over red oxide complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

S&F Roof trusses (Framed),trussed,purlins,crane gantries,rails and fastenings and heavy bracket framing(Beam,tee,angle,channel or flat sections)including distance pieces,cleats etc complete all as specified and as directed.

Supply and fixing framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; angle iron chowkats for door ,barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed.

M & L for preparation of the old surfaces of walls including complete removal of the existing treatment and applying two coats of cement base paint all as specified and directed.

M & L for preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

M & L for preparation of old plastered surfaces of walls and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old plastered surfaces of ceilings and applying one coat of white wash complete all as specified and directed.

M & L for preparation of the old surfaces of walls and applying one coat of oil emulsion distemper complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old or previously untreated steel surfaces of any description, not otherwise describe, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Note:- The total shall subject to adjustment of credit of Rs 37,255.00 for old Materials as per Schedule of Credit.

MRITUNJYA ASSOCIATES

M/S Shamsher Negi Dewa