Construction of new porch at Udyog Bhawan, Jaipur

Amount

Designing, Providing and installing semi unitized structural glazing with Laminated glass panel - 17.52 mm (8mm+ 1.52mm laminated film + 8mm) thick toughened Glass of approved Make and of Shade approved by the Engineer-In-Charge complete with outside and in vision/ spandrel panels including structural silicon sealant of approved make grade DC 995 or approved make, all mullions, transomes, gutters, sills, trims for vision and spandrel panel and including providing and installing anodized aluminum extruded frame work (minimum 20 microns) in approved colour, stainless steel brackets of SS 316 Grade, clamps, stainless steel bolts, nuts washers & shims, approved stainless steel expansion fasteners (HILTI )or equivalent with stainless steel bolts nuts and washers spacer tape of approved make grade DC 789 or of approved make /EPDM gaskets drainage provisions weather seal flashing and seal at all interfaces with building structure, openings, louverd and cladding system etc. all complete as per specifications and shop drawings based on design approved by Architect.The Mullions of 104x61x2mm thk shall be at 600mm C/C distance and transoms of 63x40x1.5 mm thk shall be at 1200 mm C/C distance, Extruded section shall be designed to accommodate for double glazing as per the directions. Final size of the Glass panel 600mm X 1200mm. The rate shall be inclusive of all the necessary material, required hardware, labour, transportation, scaffolding necessary for the complete execution of the item, etc.

Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) Above 3601 Cm2 Slabs ; FINISH :LAPATTO , SHADE : AS APPROVED BY THE ENGINEER IN CHARGE . The rate is inclusive of Supply Cutting , Laying , Polishing, Grouting, Edge Moulding Complete upto final finish and as per instruction of the engineer in-charge.

Supply and Installation of GRP/FRP Decorative Planters as per specification and instruction of Engineer In-Charge of size , 450mm diametre and minimum ht. - 600 mm. to be matched with colour and shade of surroundings.

Bidder Name

Amount

M/s B.L.SHARMA(GSTN-NA)--2839976