REPAIR TO SOFA SETS, CANNING OF CHAIRS AND POLISHING TO WOODEN FURNITURE HELD UNDER GE (EAST) DELHI CANTT-10

Amount

CHAIR EASY : FD-229 Replacement of old unserviceable front leg from existing Chair Easy and replacing with the same size new front leg made of Ist class hard wood teak to Chair Easy duly french polished all as shown on drawing and as directed.

All as per srl item No. 1 here- in- before but rear leg of Chair Easy.

All as per srl item No. 1 here-in-before but arm of Chair Easy.

All as per srl item No. 1 here-in-before but front/back/side rail of Chair Easy.

All as per srl item No. 1 here-in-before but canning bits of Chair Easy.

CHAIR DINING : FD-228 & 279 Replacement of old unserviceable front leg from existing Chair Dining and replacing with the same size new front leg made out of Ist class hard wood teak to Chair Dining duly french polished all as shown on drawing and as directed.

All as per srl item No. 6 here-in-before but rear leg of Chair Dining.

All as per srl item No. 6 here-in-before but front/back/side rail of Chair Dining.

All as per srl item No. 6 here-in-before but back rest ( horizontal wooden members for back rest of size 45mm x 15mm ) of Chair Dining.

All as per srl item No. 6 here-in-before but stiffener between front leg to rear leg of Chair Dining.

All as per srl item No. 6 here-in-before but stiffener for jointing to side stiffeners of Chair Dining.

All as per srl item No. 6 here-in-before but canning bits of Chair Dining.

Replacement of Wooden corners made of first class hard wood teak to legs of Chair Dining joining top rails each with steel screws.

CHAIR DINING (JCO/ORS) : FD/MAP-II/05 Replacement of old unserviceable front leg from existing Chair Dining and replacing with the same size new front leg made out of Ist class hard wood teak to Chair Dining duly french polished all as shown on drawing and as directed

All as per srl item No. 14 here-in-before but rear leg of Chair Dining.

All as per srl item No. 14 here-in-before but front/back/side rail of Chair Dining.

All as per srl item No. 14 here-in-before but back rest ( horizontal wooden members for back rest of size 45mm x 15mm ) of Chair Dining.

All as per srl item No. 14 here-in-before but stiffener between front leg to rear leg of Chair Dining.

All as per srl item No. 14 here-in-before but stiffener for jointing to side stiffener of Chair Dining.

Removing of old unserviceable/broken PVC seat from chair dining and replacing with new PVC seat 04mm thick in single piece all as per shape and size shown on drawing and as directed. Make:- AMKO

Replacement of Wooden corners made of first class hard wood teak to legs of Chair Dining joining top rails each with steel screws.

CHAIR WRITING : FD-250 & 280 Replacement of old unserviceable front leg from existing Chair Writing and replacing with the same size new front leg made out of Ist class hard wood teak to Chair Writing duly french polished all as shown on drawing and as directed.

All as per srl item No. 22 here-in-before but rear leg of Chair Writing.

All as per srl item No. 22 here-in-before but front/back/side rail Chair Writing.

All as per srl item No. 22 here-in-before but back rest ( horizontal wooden members for back rest of size 50mm x 15mm ) of Chair Writing.

All as per srl item No. 22 here-in-before but stiffener between front leg and rear leg Chair Writing.

All as per srl item No. 22 here-in-before but stiffener for jointing to side stiffeners of Chair Writing

All as per srl item No. 22 here-in-before but arm of Chair Writing.

All as per srl item No. 22 here-in-before but canning bits of Chair Writing.

Replacement of Wooden corners made of first class hard wood teak to legs of Chair writing joining top rails each with steel screws.

BED PLY TOP : FD-246 & 247 Removing of old unserviseable plytop from Bed Plytop and replacing with new top of same size of 12mm thick commercial ply wood, ISI marked , BWR grade of size 6.5'x3'over Bed with screws complete all as shown on drawing and as directed. (Make :-Greenply, Model :- Green / Century, Model :-Maxima / Duro, Model :- Duromac/Archid Ply). (Note :- To ensure the quality of plywood used it is mandatory to produce Purchase Voucher of full quantity of plywood alongwith Test Certificate before making any payment to contractor).

Removal of old unserviceable long rail from Bed Plytop and replacing with new long rail with rounded edges of size 1980 mm x 90mm x 35 mm of hard wood teak and fixing the same as shown on drawing including one coat of french polish after preparing the surface by sand paper complete all as specified and as directed.

All as per srl item No. 32 here-in-before but short rail of size 60mm x 60mm of suitable length to Bed Plytop.

All as per srl item No. 32 here-in-before but stiffener of size 40mm x 60mm of suitable length to Bed Plytop.

All as per srl item No. 32 here-in-before but legs of bed plytop of suitable length.

Removing of old unserviceable plywood from the existing head rest of Bed Plytop and S & F new OSTF plywood 04mm thick ISI marked, BWR grade to both sides of head rest including 12mm dia half round teak wood beading all around as per shape and size shown in drawing and fixed with nails including french polishing to ply & beading complete all as specified and directed.

All as per srl item No. 36 here-in-before but from foot rest of Bed Plytop.

Removing of old unserviceable head rest from Bed plytop and replacing with new head rest made out of Ist class hard wood teak including provision of 04 mm thick OSTF plywood including teak wood beading 12 mm thick half round as per shape and size shown in drawing and fixed with nails including french polishing to ply & beading complete all as specified and directed.

All as per srl item No. 38 here-in-before but foot rest of Bed Plytop.

Replacement of wooden bracket/corners of suitable size to Bed Plytop fixed with steel screws all as shown on drawing and as directed.

BED NEWAR : FD-245 Removing of old unserviseable plytop from Bed Newar and replacing with new top of same size of 12mm thick commercial ply wood (ISI marked) , BWR grade of size 6.5'x3'over Bed with screws complete all as shown on drawing and as directed. (Make :-Greenply, Model :- Green /Century, Model :-Maxima / Duro, Model :- Duromac/Archid Ply). (Note :-To ensure the quality of plywood used it is mandatory to produce Purchase Voucher of full quantity of plywood alongwith Test Certificate before making any payment to contractor).

Removing of old unserviceable/ broken long rail from Bed Newar and provn of new long rail of size 75mm x50mm of suitable length and made out of teak wood with rounded edges and fixing the same in position all as shown on drawing and as directed.

All as per srl item No. 42 here-in-before but short rail of size 75mm x 50mm of suitable length to Bed Newar.

All as per srl item No. 42 here-in-before but stiffener of size 75mm x 50mm of suitable length to Bed Newar.

Removing of old unserviceable plywood from the existing head rest of Bed Newar and S & F new OSTF plywood 04mm thick ISI marked, BWR grade to both sides of head rest including 12mm thick half round teak wood beading all around as per shape and size shown in drawing and fixed with nails including french polishing to ply & beading complete all as specified and directed.

All as per srl item No. 45 here-in-before but from foot rest of Bed Newar.

Removing of old unserviceable head rest from Bed Newar and replacing with new head rest made out of Ist class hard wood teak including provision of 04 mm thick OSTF plywood including teak wood beading 12 mm thick half round as per shape and size shown in drawing and fixed with nails including french polishing to ply & beading complete all as specified and directed.

All as per item No. 47 here-in-before but foot rest of Bed Newar.

Replacement of wooden bracket/corners of suitable size to Bed Plytop fixed with steel screws all as shown on drawing and as directed.

SIDE BOARD : FD-241 Removing of old unserviceable top from Side board and replacing with new top made out of 18/19mm thick exterior grade pre-laminated particle board,teak faced,ISI marked, with 04mm thick teak wood beading all-around the top of side board all as shown on drawing and as directed. (Make:- Ecoboard/Action- Tesa / Greenply).

All as per srl item No. 50 here-in-before but door shutter of side board including CP brass knobs / handles and continues piano type hinges.

All as per srl item No. 50 here-in-before but side of side board.

All as per srl item No. 50 here-in-before but bottom of side board.

All as per srl item No. 50 here-in-before but vertical partition of side board.

All as per srl item No. 50 here-in-before but shelf of side board.

Removing of old unserviceable back ply of side board and replacing with the new back ply of same size made out of 06mm thick commercial plywood (ISI marked),BWR grade all as shown in drawing and as directed.

Replacement of old unserviceable drawer with new drawer of same size and shape to Side board including knob/handle all as shown on drawing.

Removing of old/unserviceable knob / handle from the side board and S & F new 100mm long CP steel handle with steel screws as per sample ,shape and size all as per drawing and as directed.

Removing of old unserviceable legs with frame from Side board and replacing with new legs with frame of size (45x25x125mm) made out of Ist class hard wood teak and duly french polished irrespective of all as shown on drawing and as directed.

PEG TABLE : FD– 236, 277 & 384 Removing of old unserviceable top from Peg Table and replacing with new top made of 18mm thick exterior grade, ISI marked particle board duly post-formed (PFT) with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed. (Make:- Ecoboard/Action- Tesa / Greenply).

Replacement of old unserviceable leg from existing Peg Table and replacing with the same size new leg made out of Ist class hard wood teak to Peg Table duly french polished all as shown on drawing and as directed

All as per srl item No. 61 here-in-before but long top rail of Peg Table.

All as per srl item No. 61 here-in-before but bottom rail / stiffner of Peg table.

Replacement of wooden bracket/corners of suitable size to Peg Table with steel screws all as shown on drawing and as directed.

TABLE CENTRE : FD-235 & 274 Removing of old unserviceable top from Table Centre and replacing with new top made of 18mm thick exterior grade, ISI marked particle board duly post-formed (PFT) with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed. (Make:- Ecoboard /Action- Tesa / Greenply).

Replacement of old unserviceable leg from existing Table Centre and replacing with the same size new leg made out of Ist class hard wood teak to Table Centre duly french polished all as shown on drawing and as directed.

All as per srl item No. 66 here-in-before but long top rail of Table Centre.

All as per srl item No. 66 here-in-before but bottom rail / stiffner of Table Centre.

All as per srl item No. 66 here-in-before but stiffener under the top of Table Centre.

Replacement of wooden bracket/corners of suitable size to Table Centre with steel screws all as shown on drawing and as directed.

TABLE BED SIDE : FD 248 & 276 Removing of old unserviceable top from Table bed side and replacing with the new new top of same size made out of 18/19 mm thick exterior grade pre-laminated particle board,teak faced,ISI marked all as shown on drawing and as directed. (Make:- Ecoboard/Action- Tesa / Greenply).

All as per srl item No. 71 here-in-before but side of Table bed side.

All as per srl item No. 71 here-in-before but shelf / bottom shelf of Table bed side.

Removing of old unserviceable back ply from Table bed side and replacing with the new back ply of same size of 06mm thick commercical plywood (ISI marked) including one coat of french polish all as shown on drawing and as directed.

TEAPOY WOODEN : FD-232, 278 & 382 Removing of old unserviceable top from Teapoy wooden and replacing with new top made of 18mm thick exterior grade, ISI marked particle board duly post-formed (PFT) with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed. (Make:- Ecoboard/Action- Tesa / Greenply).

Replacement of old unserviceable leg from existing Teapoy Wooden and replacing with the same size new leg made out of Ist class hard wood teak to teapoy wooden duly french polished all as shown on drawing and as directed.

All as per srl item No. 76 here-in-before but top long rail of Teapoy Wooden.

All as per srl item No. 76 here-in-before but top side rail of Teapoy Wooden.

All as per srl item No. 76 here-in-before butbottom rail/stiffener of Teapoy Wooden.

Replacement of wooden bracket/corners of suitable size to Teapoy wooden with steel screws all as shown on drawing and as directed.

TABLE WRITING : FD-35(M), 249 & 275 Removing of old unserviceable top from Table Writing and replacing with new top made of 18mm thick exterior grade, ISI marked particle board duly post-formed (PFT) with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed

Removal of old damaged door complete from Table Writing and replacing with the new door of same size with piano type hinges made out of 18/19mm thick exterior grade pre-laminated particle board top all as shown in drawing including one coat of french polish and including CP brass Knob complete all as directed. (Make:- Ecoboard/Action- Tesa / Greenply).

Replacement of old unserviceable drawer with new drawer of same size and shape to Table writing including knob all as shown on drawing.

Removal of old unserviceable back ply of Table writing and replacing with the new back ply of same size of 06mm thick OSTFcommercial plywood, ISI marked including one coat of french polish all as directed.

Removing of old unserviceable side from existingTable Writing and replacing with new side made out of 18/19mm thick ISI marked exterior grade pre-laminated particle board. (Make:- Ecoboard/Action- Tesa / Greenply).

Replacement of unserviceable leg of Table writing with new leg made out of Ist class hard wood teak all as shown on drawing including one coat of french polish all as directed

All as per srl item No. 86 here-in-before but top long rail of Table Writing.

All as per srl item No. 86 here-in-before but top short rail of Table Writing.

All as per srl item No. 86 here-in-before but long/short stiffner of Table Writing.

Removing of old/unserviceable knob from the Table writing and replacing with new CP brass knob all as per drawing and as directed.

Replacement of wooden corners made of first class hard wood teak to legs joining top rails each with 04 Nos of steel screws.

TABLE DINING 1200 x 900 MM : FD/MAP-II/03 Removing of old unserviceable top from Table Dining and replacing with new top made of 18mm thick exterior grade, ISI marked Prelaminated particle board with teak faced veneers on one side and balancing white on other face with 02mm thick PVC edging on sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed. (Make:- Ecoboard/Action- Tesa / Greenply).

Replacement of old unserviceable leg from existing Table Dining and replacing with the same size new leg made out of Ist class hard wood teak toTable 1200mm x 900mm duly french polished all as shown on drawing and as directed.

All as per srl item No. 93 here-in-before but long rail of Table Dining.

All as per srl item No. 93 here-in-before but short rail of Table dining.

All as per srl item No. 93 here-in-before but stiffener of size 100x25mm under the top joining the top long side of top rails of Table Dining.

Replacement of wooden corners made of first class hard wood teak to legs joining top rails each with 04 Nos of steel screws.

TABLE DINING 06 PERSONS : FD-239, 273 & 376 Removing of old unserviceable top from Table dining 06 person and replacing with new top made of 18mm thick exterior grade, ISI marked particle board duly post-formed (PFT) with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed. (Make:- Ecoboard/Action- Tesa / Greenply).

Replacement of old unserviceable leg from existing Table dining 06 persons and replacing with the same size new leg made out of Ist class hard wood teak to table dining 06 persons duly french polished all as shown on drawing and as directed.

All as per srl item No. 99 here-in-before but long rail of Table dining 06 persons.

All as per srl item No. 99 here-in-before but short rail of Table dining 06 persons.

All as per srl item No. 99 here-in-before but stiffener of Table dining 06 persons.

Replacement of wooden corners made of first class hard wood teak to legs joining top rails each with 04 Nos of steel screws.

TABLE DINING 08 PERSONS : FD-239, 273 & 376 Removing of old unserviceable top from Table Dining and replacing with new top made of 18mm thick exterior grade, ISI marked particle board duly post-formed (PFT) with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed. (Make:- Ecoboard/Action- Tesa / Greenply).

Replacement of old unserviceable leg from existing Table Dining 08 persons and replacing with the same size new leg made out of Ist class hard wood teak to Table Dining 08 persons duly french polished all as shown on drawing and as directed

All as per srl item No. 105 here-in-before but long rail of Table dining 08 persons.

All as per srl item No. 105 here-in-before but short rail of Table dining 08 persons.

All as per srl item No. 105 here-in-before but stiffener of Table dining 08 persons.

Replacement of wooden corners made of first class hard wood teak to legs joining top rails each with 04 Nos of steel screws.

TABLE 3'X2' WITH AND WITHOUT DRAWER WOODEN : FD-284 Removing of old unserviceable top from Table 3'x2' without drawer and replacing with new top made of 18mm thick exterior grade, ISI marked particle board duly post-formed (PFT) with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed. (Make:- Ecoboard/Action- Tesa / Greenply).

Replacement of old unserviceable leg from existing Table 3' X 2' without drawer wooden and replacing with the same size new leg made out of Ist class hard wood teak toTable 3' X 2' without drawer wooden duly french polished all as shown on drawing and as directed

All as per srl item No. 111 here-in-before but long rail.

All as per srl item No.111 here-in-before but short rail.

All as per srl item No. 111 here-in-before but stiffener of Table 3' X 2' w/o drawer wooden.

Replacement of old unserviceable drawer with new drawer of same size and shape to Table 3'x2' with drawer wooden including CP brass knob and french polish all as shown on drawing.

Replacement of wooden corners made of first class hard wood teak to legs joining top rails each with 04 Nos of steel screws.

STOOL DRESSING CUSHIONED : FD/E6/MAP/14 Removing the complete old and unserviceable seat from stool dressing cushioned and replacing with of new seat made of 40density,75mm thick foam cushion duly uphostered with leatherite including bottom plywood 12 mm thick commercial all as per existing drawing and as directed. ( Note :- Sample of leatherite shall be got approved by the GE before incorporation in the work).

Replacement of old unserviceable leg from existing stool and replacing with the same size new leg made out of Ist class hard wood teak to stool dressing duly french polished all as shown on drawing and as directed.

All as per item No. 118 here-in-before but replacement of stiffners of stool dressing cushioned.

All as per item No. 118 here-in-before but replacement of front/side rail of stool dressing cushioned.

Replacement of wooden corners made of first class hard wood teak to legs joining top rails each with 04 Nos of steel screws.

TV TROLLEY : FD/E6/MAP/04 Removing of old broken glass shutters from TV trolley and replacing with of new 05mm thick glass shutters duly fixed with stainless steel fitting for fixing of glass shutters including magnetic catcher to existing TV trolley. The size of the glass shall be as per existing TV trolley or as directed.

Removing of old/broken swivel type castors from bottom of TV trolley and replacing with of new 50 mm dia swivel type castors wheel to TV trolley all as specified and directed. (Each set contain 04 dual wheels )

Removing of old unservicable/broken top of TV Trolley and replacing with of new top made of 18 mm thick teak faced exterior grade pre-laminated particle board all as per shape and size as shown on drawing and as directed. (Make:- Ecoboard/Action- Tesa / Greenply).

All as per srl item No. 124 here-in-before but bottom of TV Trolley.

All as per srl item No. 124 here-in-before but side of TV Trolley.

All as per srl item No. 124 here-in-before but back of TV Trolley.

Replacement of telesposic channel with new one as size available

TABLE COMPUTER : FD/E6/MAP/03 Removing of old unserviceable top from Table computer and replacing with the new top of same size made out of 18/19mm thick exterior grade pre-laminated particle board teak faced with 4mm thick teak wood beading all-around the table top all as shown on drawing and as directed. (Make:- Archid/Action- Tesa / Greenply).

All as per srl item No. 129 here-in-before but bottom shelf of Table computer.

All as per srl item No. 129 here-in-before but vertical board on side of Table computer.

All as per srl item No. 129 here-in-before but keyboard tray of Table computer.

All as per srl item No. 129 here-in-before but drawer of Table computer.

All as per srl item No. 129 here-in-before but pull out mouse tray of Table computer.

Removing of old unserviceable telescopic channel of key board and replacing with new stainless steel telscopic channel to Table computer as directed.

Replacement of knobs to Table computer all as shown on drawing and as directed.

BIN LINEN MULTIPURPOSE : FD/E6/MAP/09 Removing of old unserviceable top from Bin linen multipurpose and replacing with new top made out of 18/19mm thick exterior grade pre-laminated particle board teak faced with 04mm thick teak wood beading all-around the top of side board all as shown on drawing and as directed. (Make:- Ecoboard/Action- Tesa / Greenply).

All as per srl item No. 137 here-in-before but bottom of Bin linen.

All as per srl item No. 137 here-in-before but door shutter of Bin linen.

All as per srl item No. 137 here-in-before but side of Bin linen.

All as per srl item No. 137 here-in-before but shelf of Bin linen.

All as per srl item No. 137 here-in-before but vertical partition of Bin linen.

All as per srl item No. 137 here-in-before but drawer of Bin linen.

Removing of old unserviceable hinges and replacing with of new hinges to Bin linen as per size and design shown on drg complete all as directed.

Removing of old broken handle and replacing with of new CP steel handle to Bin linen as per shown on drg and as directed.

Removing of old magnetic catcher and replacing with of new magnetic catcher to Bin linen as per size and design shown on drg.

Removing of old unserviceable back ply of Bin linen and replacing with the new back ply of same size made out of 12mm thick commercial plywood (ISI marked) all as shown in drawing and as directed.

Removing of old unserviceable legs with frame from Bin linen and replacing with new legs with frame of size (40x25x100mm) made out of Ist class hard wood teak and duly french polished irrespective of all as shown on drawing and as directed.

BOOK CASE : FD-237 Removing of old unserviceable top from Book case and replacing with new top made out of 18/19mm thick commercial pre-laminated particle board teak faced with 04mm thick teak wood beading all-around the top of side board all as shown on drawing and as directed. (Make:- Archid/Action- Tesa / Greenply).

All as per srl item No.149 here-in-before but bottom.

All as per srl item No. 149 here-in-before but shelf.

All as per srl item No. 149 here-in-before but side of Book case.

All as per srl item No. 149 here-in-before but door with piano type hinges of Book case.

Removing of old unserviceable legs with frame from Book case and replacing with new legs with frame of size (40x25x100mm) made out of Ist class hard wood teak and duly french polished all as shown on drawing and as directed.

Removing of old unserviceable back ply of Book case and replacing with the new back ply of same size made out of 06mm thick commercial plywood (ISI marked) all as shown in drawing and as directed.

TABLE DRESSING LADIES WITH MIRROR : FD-32(M) & 251 Removing of old unserviceable looking mirror from Table dressing ladies with frame and replacing with new 05mm thick looking mirror of same size duly fixed in new frame of teak wood and duly french polished all as shown on drawing. (Make:- Modi-guard/Saint-Gobain/Swastik).

Removing old broken/unserviceable knob from Table dressing ladies and replacing with new 40 mm size CP brass knob as per shape and size shown in drawing and as directed.

Removing old broken/unserviceable sliding glass from Table dressing ladies and replacing with new 05mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as specified and directed.

Removing of old unserviceable legs with frame from Table dressing ladies and replacing with new legs with frame of size (40x25x150mm) made out of Ist class hard wood teak and duly french polished all as shown on drawing and as directed.

Removing of old unserviceable drawer from Table dressing ladies and replacing with new drawer of size all as shown on drawing and as directed.

Removing old broken/unserviceable complete box of Table dressing ladies including drawers and replacing with new complete box including drawers with knobs and glass shutters. The box shall be made out of 18/19mm thick exterior grade pre-laminated particle board teak faced, 12mm thick commercial plywood at the back and bottom of box and duly covered with 04mm thick teak wood beading wherever required to the box and duly french polished all as shown on drawing and as directed. (Make:- Ecoboard/Action- Tesa / Greenply).

TABLE DRESSING GENTS WITH MIRROR : FD-31(M) & 230 Removing of old unserviceable looking mirror with frame from table dressing gents and replacing with new 05mm thick looking mirror of same size duly fixed in new frame of teak wood and with two Nos of MS hanging clips with 03 holes to fix on wall and duly french polished all as shown on drawing. (Make:- Modi-guard/Saint-Gobain/Swastik).

Removing old broken/unserviceable box complete with drawer of table dressing gents and replacing with new box with two Nos of drawers with CP brass knobs and made out of 18/19mm thick exterior grade pre-laminated particle board teak faced, 12mm thick commercial plywood at back and having 04mm thick teak wood beading wherever required to the box and duly french polished all as shown on drawing and as directed. (Make:- Archid/Action- Tesa / Greenply).

Removing old broken/unserviceable drawer of Table dressing gents and replacing with new drawer made out of 18/19mm thick exterior grade pre-laminated particle board teak faced with 04mm thick teak wood beading wherever required to the drawer all as shown on drawing and as directed. (Make:- Archid/Action- Tesa / Greenply).

Removing old broken/unserviceable knob from Table dressing gents and replacing with new 40 mm size CP brass knob as per sample, shape and size shown in drawing complete all as specified and directed.

TABLE DRESSING GENTS WITH MIRROR MAP: FD/E6/MAP/16 Removing of old unserviceable looking mirror with frame from table dressing gents and replacing with new 05mm thick looking mirror of same size duly fixed in new frame of teak wood and with two Nos of MS hanging clips with 03 holes to fix on wall and duly french polished all as shown on drawing. (Make:- Modi-guard/Saint-Gobain/Swastik).

Removing old broken/unserviceable box complete with drawer of table dressing gents and replacing with new box with two Nos of drawers with CP brass knobs and made out of 18/19mm thick exterior grade pre-laminated particle board teak faced, 12mm thick commercial plywood at back and having 04mm thick teak wood beading wherever required to the box and duly french polished all as shown on drawing and as directed. (Make:- Archid/Action- Tesa / Greenply).

STOOL DRESSING CB : FD-282 Removing old broken/unserviceable short/long top rail of stool dressing and replacing with new side short/long top rail of Ist class hard wood teak wood as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed.

Removing old broken/unserviceable legs of stool dressing and replacing with new legs of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed.

Removing old broken/unserviceable stiffiner from stool dressing and replacing with new stiffiner of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.

HAT STAND WITH MIRROR : FD-233 & 362 Removing old broken/unserviceable teak plywood from front frame of hat stand and replacing with new 04mm thick OSTF commercial plywood as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed. (Make :- Greenply/Century/Duro).

Removing old broken/unserviceable plywood from back side of hat stand and replacing with new 04mm thick commercial plywood as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed. (Make :- Greenply/Century/Duro).

Removing of old/broken looking mirror from hat stand and replacing with new 05mm thick looking mirror of same size and fixed in position with teak wood beading all around complete all as shown on drawing (Make:- Modi-guard/Saint-Gobain/Swastik).

Removing old broken/unserviceable beading from hat stand and replacing with new 06mm x 35mm thick teak wood beading all as per drawing including french polishing to match the other parts complete all as specified and directed.

Removing old broken/unserviceable wooden battens from hat stand and replacing with new teak wood wooden battens as per shape and size shown in drawing and as directed.

Removing of old unserviceable Aluminium pegs from Hat stand and replacing with new Aluminum pegs of size 120mm x 75mm (overall) to Hat stand all as per drg.

TABLE DRESSING LADIES WITH STOOL : FD/E6/MAP-II/07 Removing of old broken/unserviceable back and replacing with new back of 19mm Pre-laminated board from Table dressing ladies.

Removing of old broken/unserviceable door shutter from Table dressing Ladies and replacing with new shutter of 19mm Pre-laminated board.

Removing of old unserviceable looking mirror from Table dressing ladies and replacing with new mirror of same size and thickness as exixting.

Removing of old broken/unserviceable handle of Table dressing ladies and replacing with new handle as per exixting.

Removing of old broken/unserviceable side of Table dressing ladies and replacing with new side made out of 19mm thick prelaminated particle board.

Removing of old broken/unserviceable cabinet of Table dressing ladies and replacing with new cabinet made out of 19mm thick prelaminated particle board.

Removing of old broken/ unserviceable drawers of Table dressing ladies and providing new drawer made out of 18mm thick exterior grade prelaminated particle board teak faced with 04mm thick teak wood beading wherever required to the drawer as shown in the drawing.

PAINTING AND POLISHING Complete removal/scrubbing of the entire old polished surfaces of the following items with grinding machine, including preparation of old wooden surfaces by applying seina/burnt seina uniformally and filing of cavities with putty/filler/sealer and applying two or more coats of best quality french polish with spray machine in order to obtain high glossy finish to the following wooden furniture items to the entire satisfaction of GE and all as directed. Bed HArd Ply Top, FD-246 & 247

Bed Newar, FD-245

Book case, FD-237

Chair Easy, FD-229

Chair Dining, FD - 228 & 279

Chair Dining (JCOs/ORs), FD/MAP-II/05

Chair Writing, FD - 250 & 280

Chair Dining (MAP), FD/E6/MAP/10(R)

Hat Stand with Mirror, FD-233

Book case, FD-237

Stool dressing cushioned, FD/E6/MAP/14

Sofa Set 05 seater with cushion, FD-258 & 281

Sofa Set 04 seater with cushion, FD-258 & 281

Table Dining 04 Person, FD/MAP-II/03

Table Dining 06 Person, FD- 239, 273 & 376

Table Dining 08 Person, FD- 239, 273 & 376

Table Peg, FD- 236, 277 & 384

Table Centre, FD-235 & 274

Table 3' x 2' with drawer and without drawer wooden, FD-283, FD-284

Table dressing Gents with mirror, FD-31(M) & 230

Table dressing Ladies with mirror, FD-32(M) & 251

Table Writing, FD-35(M), 249&275

Teapoy Wooden, FD-232 & 278

NAVEEN TRADERS