Upgradation of Datacom equipment's (UTN devices) and network connectivity in connection with PRS/UTS Modernisation at Tier - 2, 3, & 4 locations of Izzatnagar, Lucknow, Varanasi Division and HQ Gorakhpur over N. E. Railway.

A-Upgradation of UTN devices over Tier - 2, 3, & 4 locations over Izzatnagar division in Connection with PRS Modernisation

Supply of Pre-lubricated HDPE Telecom duct, 40 mm OD, 33 mm ID in Drum length of 500/ 1000 meter length as per RDSO specification No. RDSO/SPN/TC/45/2013 Rev. 2.0 Amdt.3 or latest or TEC GR No. G/CDS 08/02 NOV-2004 OR with latest amendments as available either from RDSO or TEC 1 approved firms along with test report of manufacturer with and following accessories supplied a) End Plugs- 2no for each km b) Cable sealing plugs -2 no. for each km of duct (c ) Plastic couplers slip fit/push fit type - 2no for each km of duct d) collars, bends to be provided along with drum for each km of drum etc. . HDPE duct should be Bright yellow or Bright blue colour [As per Railway Board's letter No. 2006/Tele/TP/1(3359379) dt. 02.01.2026]. The item also includes supply of all the accessories of HDPE duct like end caps, collars, bends, couplers etc. (Inspection: RDSO/RITES)

Supply of thermoshrink jointing kit (RTSF-4) as per RDSO Specification No.IRS:TC 77/ 2012 Rev. 3 or latest. Jointing kit must be procured from RDSO approved vendor along with OEM test & warranty certificate. (Inspection: Consignee)

Installation of thermoshrink jointing kit (RTSF-4) as per RDSO specification IRS/TC/77/2012 Rev. 3 or latest and as per direction given by Engineer at site. Railway will supply only thermoshrink jointing kit.

Supply of OFC Joint closure for 24 fibres as per RDSO specification no. RDSO/ SPN/ TC/ 68/ 2025 Revision 2.0 or latest. (Inspection: Consignee)

Supply of LC to SC Single Mode Simplex/Duplex Fibre Optic Patch Cable 5m length. Make: 3M, Huber- Shuner, R&M, TE Connectivity/Raychem/D- Link or Superior. (Inspection: Consignee)

Supply of SC to SC Single Mode Simplex/Duplex Fibre Optic Patch Cable 5m length. Make: 3M, Huber- Shuner, R&M, TE Connectivity/Raychem/D- Link or Superior. (Inspection: Consignee)

Supply of 2 MBPS E1 to Ethernet Convertor can operate on 230 VAC & 48 VDC as per Technical Specification in Annexure A attached. Make/ Brand: Techroute TD-CNV-ETH-E1/MROTEK/Cygnus/Team link/RAD/Anda Telecom/D-link. (Inspection: RITES)

Supply of Single Mode Single Fiber Optical Media Driver 20KM, wavelength supported 1310 & 1550 nm, 10/100/1000 (Giga) RJ-45 with inbuilt power supply 230VAC/-48VDC as per Technical Specification in Annexure A attached. Make & Model: Tech routes TD-FMC-20KM/DIGISOL DG-MC6123S/DRON EDGE/Syrotech/D-Link/TP Link/Digisol or superior. (Inspection: RITES)

Supply of Single fiber SFP L1-1 compatible to Tejas STM-1. (Inspection: Consignee).

Supply of PSU (Power supply) Card suitable for PUNCOM. Make-Mux model V-Mux 100. (Inspection: Consignee).

Supply of Loop Protection (LPC) Card suitable for PUNCOM Equipment Make: PUNCOM. (Inspection: Consignee).

Supply of TME CARD FOR PRIMARY MUX MODEL NO. V-MUX 100 MAKE:- PUNCOM. (Inspection: Consignee).

Supply of Power supply unit (PSU Card) for Webfil PD -MUX as per RDSO Spec -IRS-TC-68/12 or with latest amendment compatible with existing WEBFIL PD-MUX. Make-WEBFIL. (Inspection: Consignee).

Supply of 2W/4W E&M VF Interface card (4 circuits/card) as per RDSO spec. no IRS-TC-68/2012 with latest amendment of Webfil make. (Inspection: Consignee).

Supply of TRIBUTARY card as per RDSO Spec. no. IRS-TC 68/2012 with latest amendment of Webfil make. (Inspection: Consignee).

Supply of NIM card as per RDSO Spec. no. IRS-TC 68/2012 with latest amendment of Make-Webfil. (Inspection: Consignee).

To Horizontal boring of dia. 120 mm under Railway Track/ Road/ Culvert etc. laying of cables at a minimum depth of 2 meter extending up to 2.5 meter from formation level as per drawing and directed by trenchless technology excluding the cost of DWC pipes. The bore should be capable enough for insertion of 120 mm dia DWC pipes (a) The Cost shall includes horizontal boring through any intermediate obstruction either natural of man made or any boundary 17 strata. (b) The rate is inclusive of all materials, equipment's and labour required for doing trenchless horizontal boring under the railway track. To this extra shall be admissible on any account than the rates as per above. All necessary arrangements are to be provided and all precautions are to be taken so that bore coming out at other end is not deviated from the horizontal level line by more than 250 mm horizontal or vertical location. (d) The rates shall be inclusive of detection and protection of underground utilities encountered during boring. The bore shall be done at the depth of minimum 2000 mm from the ground level [As per Railway Board's letter No. 2006/ Tele/ TP /1 (3359379) dt. 02.01.2026]. The bore should be capable enough for insertion of 120 mm dia DWC pipes.

Laying of HDPE duct (40/33mm) as per Technical Specification in Annexure A attached

Splicing of fibre (Splicing machine and machine operator shall be given by contractor including all T & P items and labour required).

Excavation of cable trench of 110 cm depth and 30 cm wide in all kinds of soil with in station limit and block section for main cable as per direction of site engineer and its refilling with same excavated soft soil as per Technical Specification in Annexure A attached.

Blowing/drawing of OFC cables in the HDPE duct along with all the protective work as per instructions of engineer incharge at site

Laying of OFC/ PIJF cable/ Quad cables in trenches, in HDPE pipe etc. All protective works & meggering of all cables take provided by contractor as per Technical Specification in Annexure A attached. (All cables will be supplied by Railway)

Supply and fixing of 20 PAIR CT BOX made of Cast Aluminium with in built locking system should double outlet with leading in brass nozzles and main tag block plate is mounted on the inner aluminium chamber with 40 brass terminals 3.8 mm thickness 2A type studded in the hylam sheet 4 mm thickness and superior quality. Make/Brand :RUDRA GLOBAL POWER or superior. (Inspection :Consignee)

Supply of Single mode 6 Fiber Armoured Optic Fibre Cable as per Technical Specification in Annexure A attached. Make: MOLEX, AMP, Schneider, Systemax, Panduit, D-Link,Finolex. (Inspection: RITES)

Supply of STP CAT-6 Cable (Shielded Twisted Pair) of 305 Mtr box compliant with latest EIA/TIA-568-B2-1 as per Technical Specification in Annexure A attached. Make: DLink/ DAX/ Lucent/ Crone/ Amp./ Sterlite/ Finolex/ Digilink/Dogisol. (Inspection: RITES)

Supply & Installation of PVC conduit pipe (minimum 25 mm dia./1.55 mm thick, 3 metre long and ISI brand) with flexible pipes fixing /laying materials and all other accessories as per requirement. Make: D Plast, Polypack, Polycab or superior. (Inspection: Consignee)

Supply & Installation of 2 x 6 Fiber (SC type) FMS having capacity to be included inside pole mounted rack as per Technical Specification in Annexure A attached. Make: Molex/ iball/D-Link/ Syrotech/ Commscope/ Digisol/PANDUIT/3M/Raychem/TYCO. (Inspection: Consignee

Supply of STP/UTP RJ 45 Connectors. Make: D-Link/Digisol or superior. (Inspection: Consignee)

Supply of UTP CAT 6 Patch Cord, 2 Meters long factory crimped with suitable connector at both ends. It Shall comply to TEC GR No. TEC/GR/SLC - 01/02.AUG 05 (TEC Standard Number: TEC 52010:2005) with latest amendments,Version. Make: Schneider, Systemax, Panduit, D-Link, Molex. (Inspection: Consignee)

Trenching on pucca road/platform upto a depth of 1.20 Meter & 30 Cm. wide and refilling with soil including leveling of trenches and repairing to the original condition. The responsibility of obtaining permission from civil authorities, like -Municipality, PWD, Forest etc. rests with the tenderer (All the materials required for repairing of road / platform shall be supplied by the contractor.

Supply, Installation, Testing & Commissioning of 10 KVA UPS including suitable Rack as per Technical Specification in Annexure A attached. Make:APC/ Uniline/ Microtek/ Amararaja /Luminous/Numeric/TATAlibert/Emerson. (Inspection: RITES)

Supply of Maintenance Free Valve Regulated Lead Acid (SMF-VRLA) 12V/120AH Battery consisting of 6 Cells of 2V 120AH Battery as per RDSO Specification No. IRS:S-93/96 with Amendment-1 or latest. Make-EXIDE/ AMARRAJA/ AMRON/ HBL/ OKAYA or similar. (Inspection: RDSO)

Supply of power cable 3 core 2.5 sq mm multi strand (36/0.3 mm dia) cable as per IS 694:1990 reaffirmed 1995 or latest suitable for railway electrification area shall be of reputed make like Delton/LAPP/Finolex/Havells/Polycab/Mescab or superior. (Inspection: Consignee)

Supply & Installation of Sealed Maintenance free VRLA Battery set of standard make similar to Exide / Amararaja, 2V per cell, 200 AH capacity in stack of 24 cells for giving a out put voltage of 48V complete with associated base plates interconnecting cables, connectors for the rows and cells with all accessories as per RDSO Specification No. IRS 93/96(A) Amdt.1 or latest with cuticle steel/hylem tray battery rack to install/house batteries. (Inspection: RDSO)

Supply & Installation of SMPS based battery charger 48 Volt DC/25 Amp in N+1 Configuration module of 25 Amp (3 Nos) with ultimate expendable capicity 75 Amp with automatic switching between the module as per RDSO/SPN/TC/23/1999 Ver.4 Amnd.1 or latest. (Inspeciton: RDSO)

Supply of managed expandable rack type STM-1 ADM as per Technical SPEC No -TEC GR No GR/ SDH-04/02 MARCH-02 with latest amendment with 36 STM-1 aggregate interface 21 E1s and 4Nos of 10/100 BASE T Ethernet Port, Order Wire, Power Supply Unit sub rack, installation material and accessories, Manual and Software etc.. The Equipment should be fully wired for its ultimate capacity. It should be fully compatible with existing OFC system (Make- PUNCOM). (Inspection: RDSO)

Supply of programmable Primary Digital Drop Insert MUX with conference facility fully wired for 30 channels complete with all accessories and power supply etc. asper IRS-TC-68-2004 or latest. The MUX shall be equipped for 16 E&M VF circuits, two 64KBPS circuits, 12 subscriber interface circuits (Make- PUNCOM / Webfill). (Inspection: RDSO)

Installation, wiring, testing & commissioning of managed SDH (STM-1 Add/Drop MUX and upgradeable to STM-4) fully wired for 2 X 63 MB and equipped for 21E1s and a Virtual Container (VC)-12 with STM-1(L1.1) aggregate interface including power supply, order wire, Ethernet card, sub rack, inbuilt DDF, installation material and all other accessories, manuals etc. as per TEC. Specification GR SDH 04/02, March 02 or with latest amendment. The contractor will install 38 all other accessories as mentioned in the above said TEC Specifications and system will have provision of different redundancy cards as per the TEC Specifications. Note: It shall be possible to increase capacity from 21E1 to 63E1s by adding / inserting tributary cards. This includes connecting all pig tails, optical patch cords etc. to the SDH equipment. This also includes connecting the SDH equipment with all cards to the 48V Bus including supply of wires and connectors. Termination of all E1s on DDF taking PVC cable over runway or a wall. At the terminal station, one port may be disabled if required as per instructions given by site engineer incharge.

Supply, installation & fixing of FDMS as per RDSO Spec. No. RDSO/SPN/TC/37/2020 Revision 4.0 or latest suitable for terminating of 24/48 fibre OFC. 39 Splicing of 24/48 fiber Optic Fibre Cable on the splice trays with provision of taking out 24/48 fiber of OFC. Pigtail with connector etc. 10 meter & 5 meter length as per Technical Specification in Annexure A attached and as advised by railway engineer as per requirement shall be supplied by contactor. This includes fixing of FDMS inside rack. Make: 3M/ Raychem/ TYCO (Inspection: RDSO/RITES)

Supply, installation and Fixing of 19 inch rack of 17U size (HxWxD) 931mm x 600mm x 600mm with required accessories for mounting the equipment's as per Technical Specification in Annexure A attached. Make: APW President or Rittal or HCL or APW or Comrack or Valrack or Schneider or Dataracks or D-Link or superior. (Inspection: RITES)

Supply of 4 Port LAN Extender 30MBPS Fast Ethernet on 4W/2Wconfigurable & it should support 230V AC/48V DC working with AC Power cord as per RDSO Specification No. RDSO/SPN/TC/82/2020 Rev. 2.0 or latest. Make: MROTEK/ TEAMENGINEERING/ Cygnus/ Team link/D-link or superior. (Inspection: Consignee)

Supply and installation of 24 Ports Managed PoE+ Layer-2 Access Switch 24 10/100/1000 BASE-T PoE, 10G 4 SFP ports and RJ-45 console port with supply of 0 4 Nos. compatible 10G SFP of same make of switch as per Technical Specification in Annexure A attached. (Switch should be TTP approved and to be procured from TTP approved sources). Make: Cisco/Juniper/HP/Zyxel/Digisol or superior. (Inspection: RITES).

Supply & Installation of layer-2 switch (minimum 8+2 manageable) with 08 Nos. 10/100/1000 Mbps ethernet port POE and 02 nos.1000 base X SM 43 SFT port with optical modules complete with all accessories etc. as per clause 14.0 (III) of RDSO specification no. RDSO/ SPN/ TC/ 65/ 2021 Rev 6.0 Amendment No. 1, 2 & 3 or latest and as per Technical Specification in Annexure A attached. (Switch should be TTP approved and to be procured from TTP approved sources). Make: Cisco/Juniper/HP/Zyxel/Digisol or superior. (Inspection : RDSO)

Supply of SFP Optical/Electrical 1 Gbps or 100/1000 Mbps Electrical as per Technical Specification in Annexure A attached and as per site requirement. Make: Syrotech/CISCO/ JUNIPER/ D-Link or superior. (Inspection: Consignee)

Supply, Installation, Configuration, Testing and Commissioning of Tier-3/4 Router (04 WAN ports) with all associated accessories, power cable, 45 console cable, manuals, mounting hardware etc. All other specification as per CRIS letter no. CRIS/HQ/NTWG/26/2023 CN dated 20.10.2023 & Railway Board's letter no. 2024/Tele/6(3)/1 dated 06.02.2026 . Detail Specification in Annexure A attached. This item should be compatible with Tier 1 Router which will be installed by CRIS. Make: CISCO/ Juniper/ Nivetti/ HP/Techroutes or superior. (Inspection : RITES).

Supply, Installation, Configuration, Testing and Commissioning of Tier-2 Router (08 WAN ports) along with all associated accessories, power cable, 46 console cable, manuals, mounting hardware etc. All other specification as per CRIS letter no. CRIS/HQ/NTWG/26/2023 CN dated 20.10.2023 & Railway Board's letter no. 2024/Tele/6(3)/1 dated 06.02.2026. Detail Specification in Annexure A attached.This item should be compatible with Tier 1 Router which will be installed by CRIS. Make: CISCO/ Juniper/ Nivetti/ HP/Techroutes or superior. (Inspection : RITES).

Supply and installation of Maintenance and Administrative Console (in form of Laptop) for programming and maintenance of system as per Technical Specification in Annexure A attached. Make - HP/Dell/Lenovo/Acer. (Inspection: Consignee)

Supply & Installation of NMS Maintenance Console (in form of Desktop) Intel Core i5 and MS Office with license pre installed with Standard Display 23 inch or higher & Onsite OEM warranty- Min. 3 Years as per Technical Specification in Annexure A attached. Make: HP ProOne 440 G9 AIO I5 13500 Win11P /DELL/LENOVO/ACER. (Inspection: RITES)

Supply & Installation of NMS LED Video Display Unit of size 55 inches, 4K UHD including wall mount kit as per Technical Specification in Annexure A attached. Make/Mode: Samsung-UA55U8100 FULXL/LG/SONY/Panasonic or superior. (Inspection: Consignee)

Supply & Installation of NMS All in one InkJet Color printer (Multi- Function: Print, Scan & Copy) with Fax, Wi-Fi & Auto Duplex facility as per Technical Specification in Annexure A attached. Make/Model: CANON All in One Printer G4780/HP/Epson/Brother. Inspection: Consignee Above/

B-Upgradation of UTN devices over Tier - 2 and Tier - 3 locations in Connection with PRS Modernisation in Lucknow division

Supply & Installation/Testing of Terminal Server( TS), with 16 Terminal ports with 1500 V AC isolation on each terminal port, each unit supplied one AC power cord & one user manual as per Technical Specification in Annexure A attached. Make: Cygnus/team link or equivalent specification to Team Link-5088 16 Port. (Inspection: Consignee)

Supply of STP CAT-6 Cable (Shielded Twisted Pair) of 305 Mtr box compliant with latest EIA/TIA-568-B2-1 and as per Technical Specification in Annexure A attached. Make: DLink/ DAX/ Lucent/ Crone/ Amp./ Sterlite/ Finolex/ Digilink/Dogisol. (Inspection: RITES)

Supply, Installation, Configuration, Testing and Commissioning of Tier-3/4 Router (04 WAN ports) with all associated accessories, power cable, 3 console cable, manuals, mounting hardware etc. All other specification as per CRIS letter no. CRIS/HQ/NTWG/26/2023 CN dated 20.10.2023 & Railway Board's letter no. 2024/Tele/6(3)/1 dated 06.02.2026 . Detail Specification in Annexure A attached. This item should be compatible with Tier 1 Router which will be installed by CRIS. Make: CISCO/ Juniper/ Nivetti/ HP/Techroutes or superior. (Inspection : RITES).

Supply, Installation, Configuration, Testing and Commissioning of Tier-2 Router (08 WAN ports) along with all associated accessories, power cable, 4 console cable, manuals, mounting hardware etc. All other specification as per CRIS letter no. CRIS/HQ/NTWG/26/2023 CN dated 20.10.2023 & Railway Board's letter no. 2024/Tele/6(3)/1 dated 06.02.2026. Detail Specification in Annexure A attached.This item should be compatible with Tier 1 Router which will be installed by CRIS. Make: CISCO/ Juniper/ Nivetti/ HP/Techroutes or superior. (Inspection : RITES).

Supply, Installation, Testing & Commisioning of Gigabit Ethernet Media Converter Single Mode Single Fiber, SM, Sc, 1310nm, Transmission Type: 5 10/100/1000M FDX/HDX, Wavelength: Single mode: 1310/1550nm up to 20Km, Power Supply:External 1A,+5VDC, Connector: UTP: RJ-45 connector,Optical: SC connector (Single Fiber), with all accessories like power adaptor. All installation material and suitable optical patch cord should be supplied by contractor. Make: DRON EDGE DE-SMBIDI-2025/Tech routes/Syrotech/D-Link/TP Link/Digisol or superior. (Inspection: Consignee)

Network Cable Tester POE Wire Checker Launcher & Receiver UTP & STP Cable Continuity Tester for RJ45/CAT5/CAT6/CAT7 Cable. Make: FEDUS or superior. (Inspection: Consignee)

Supply, Installation, Testing and Commissioning of 2 KVA on line UPS 120 Minutes backup with suitable battery stand as per Technical Specification in Annexure A attached. Make: APC/Numeric/Emerson/Uniline/Vertive/ Microtek/ Amararaja /Luminous//TATAlibert/V Gaurd/BPE. (Inspection: RITES)

Supply of 10 m long OFC patch cord single mode simplex of different configuration SCAPC/ SC-FC/LC-LC/LC-FC/LC-SC/SC-SC/FC-FC etc. as per site requirement. Make: 3M, Huber- Shuner, R&M, TE Connectivity/Raychem/D-Link or Superior (Inspection Consignee).

Supply, installation and Fixing of 19 inch equipment rack of 24U size and minimum depth of 650mm with cable tray for accomdating modems, power strips and fan for proper ventilation with required accessories for mounting the equipment's as per Technical Specification in Annexure A attached. Make: EPI or President or Netcell or Valrack or Rittal or Netrack or SVTel or Rackom or Schneider or D-Link or superior. (Inspection: RITES)

Supply and fixing of capping casing of size 25 mm X 10 mm X 0.3mm press fit on wall, as per site requirement all fixing materials will be supplied by the contractor. (Inspection: Consignee)

Supply of Power Cable 3 Core, 2.5 sq. mm, multi strand copper conductor, PVC insulated, armored, confirming to IS: 1554 Part-I or latest as per Technical Specification in Annexure A attached. Make: Delton/ LAPP/ Finolex/ Havells/ Polycab /Mescab or superior. (Inspection: RITES)

Laying and drawing of data/OFC / Power cable through PVC Pipe, Casing Capping & conduit Pipe as per Instruction of Engineer Incharge.

Supply of Power Board (3 No's 5 Amp & 1 No. 15 Amp socket total -4 points). (Inspection: Consignee)

Supply of C series MCB 2 POLE 32 AMP with metal enclosure. Make: Legrand (Model No.: 4086 36) or Havells or L&T or Anchor. (Inspection: Consignee)

Supply and installation of Professional Large Format UHD Display unit, Size minimum 139 cm (55 inch). Non Touch screen duty cycle 24x7 as per Technical Specification in Annexure A attached. Make: LG 55UH7J-H/Samsung/Sony/Panasonic or superior. (Inspection: Consignee)

Supply of Online UPS of Rating 5.0 KVA With Battery Of Backup Time 120 Minutes as per Technical Specification in Annexure A attached. Make: BPE- MFIL1105L200/APC/ Uniline/Vertive/ Microtek/ Amararaja /Luminous/Numeric/TATAlibert/Emerson or superior. (Inspection: Consignee)

Supply, Installation, Testing & Commissioning of rack mountable 24 port manageable Layer-2 switch 24 x 10/100/1000 BASE-T PoE Ports and 4x1 G 17 (minimum) SFP+ ports with supply of compatible 2 Nos of Single Mode 1G SFP Modules of same make of switch , minimum PoE Power Budget of 370W or better with all accessories as per RDSO spec. No:RDSO/SPN/TC/65/2021 Version 6.0 or latest. (Switch should be TTP approved and to be procured from TTP approved sources). All the accessories and fixing materials required for this installation are to be supplied by contractor within the same cost. Make: Cisco/Juniper/HP/Zyxel/Digisol or superior. (Inspection : RDSO)

Supply. Installation and commissioning of CEL-1 Card consist 04 port 10/100 Mbps Ethernet port for TJ1400 model with associated accessories (Suitalbe for Tejas STM-TJ1400 ). (Inspection: RDSO)

Supply of cross connect XA140T5 Card compatible with STM-4 TJ1400. Note- XA140T5 card should be compatible with existing STM-4.(Suitalbe for Tejas STM-TJ1400 ). (Inspection: RDSO)

Supply of 63 E1 interface card Suitable for TJ1400 (Suitalbe for Tejas STM-TJ1400 ). (Inspection: RDSO)

Supply of Single mode 6 Fiber Armoured Optic Fibre Cable as per Technical Specification in Annexure A attached. Make: MOLEX, AMP, Schneider, Systemax, Panduit, D-Link,Finolex. (Inspection: RITES)

Supply of Pre-lubricated HDPE Telecom duct, 40 mm OD, 33 mm ID in Drum length of 500/ 1000 meter length as per RDSO specification No. RDSO/SPN/TC/45/2013 Rev. 2.0 Amdt.3 or latest or TEC GR No. G/CDS 08/02 NOV-2004 OR with latest amendments as available either from RDSO or TEC 22 approved firms along with test report of manufacturer wiitth and following accessories supplied a) End Plugs- 2no for each km b) Cable sealing plugs -2 no. for each km of duct (c ) Plastic couplers slip fit/push fit type - 2no for each km of duct d) collars, bends to be provided along with drum for each km of drum etc. . HDPE duct should be Bright yellow or Bright blue colour [As per Railway Board's letter No. 2006/Tele/TP/1(3359379) dt. 02.01.2026]. The item also includes supply of all the accessories of HDPE duct like end caps, collars, bends, couplers etc.. Inspection: RDSO/RITES

Blowing/drawing of OFC cables in the HDPE duct along with all the protective work as per instructions of engineer incharge at site.

Supply of 12 port loaded LIU rack mountable as per Technical Specification in Annexure A attached. Make: Molex/ iball/D-Link/ Syrotech/ Commscope/ Digisol/PANDUIT/3M/Raychem/TYCO. (Inspection: Consignee)

Installation, Testing & Commissioning of rack mountable 12 port Loaded LIU. All the accessories and fixing materials required for this installation are to be supplied by contractor within the same cost.

Cutting of the platform with tile/rock cutting machine or manually to 30 cm depth and 12 cm width approximately(includes cutting of tiles neatly if provided) by removing slabs/tiles if any and laying of catches/pipe as supplied by railways and refilling the trench after laying of HDPE pipe and repairing the platforms as existing shape.Platform/paccka area only cutting with marble cutting machine as per Technical Specification in Annexure A attached

Supply of DPU-8 Power Supply Card Suitable for STM TJ1400 (Suitalbe for Tejas STM-TJ1400 ). (Inspection: RDSO)

Supply & Installation of layer-2 switch (minimum 8+2 manageable) with 08 Nos. 10/100/1000 Mbps ethernet port POE and 02 nos.1000 base X SM 28 SFT port with optical modules of same make of switch complete with all accessories etc. as per clause 14.0 (III) of RDSO specification no. RDSO/ SPN/ TC/ 65/ 2021 Rev 6.0 Amendment No. 1, 2 & 3 or latest and as per Technical Specification in Annexure A attached. (Switch should be TTP approved and to be procured from TTP approved sources). Make: Cisco/Juniper/HP/Zyxel/Digisol or superior. (Inspection : RDSO)

Supply of XA14ET card compatible with TJ 1400 to support / connect 32 E1 120 Ohm LFH male cable to drop tributary and two No Optical ports interface for support of STM TJ 1400 (Suitalbe for Tejas STM-TJ1400 ). (Inspection: RDSO)

Supply of High End Programming Device i7 (3.3 Ghz or higher) with supply of 1 KVA online UPS Make: APC/APLAB/DELTA with 30 Minutes back as per Technical Specification in Annexure A attached. Make: HP/Dell/Levono/Acer/Apple (Inspection: RITES)

Supply of 7 Slot Chasis FTU20,FTU& OAM Suitalbe for TJ1400 (Suitalbe for Tejas STM-TJ1400 ). (Inspection: RDSO)

Supply of SFP S.4.1 compatible to existing STM -4 Equipment for 40 KM. (Inspection: Consignee)

Supply of 30 Mbps 2W/4W LAN Extender supporting short & longer distance (up to10 kms or more) dual power supply AC/DC from a single socket plug in module in the stand alone unit to be accommodate in rack as per Technical Specification in Annexure A attached. Make: TEAMLINK 3002 VAYU 2W/4W/MROTEK/Cygnus/Team link/D-link. (Inspection: RITES)

Supply of single mode single fiber 1G SFP module as per RDSO specification no. RDSO/SPN/TC/65/2021.version-6 or latest. Make: Syrotech/CISCO/ JUNIPER/ D-Link or superior. (Inspection: Consignee)

Supply, Installation, Testing & Commissioning of 10 KVA UPS including suitable Rack as per technical specification as per Technical Specification in Annexure A attached. Make:APC/ Uniline/ Microtek/ Amararaja /Luminous/Numeric/TATAlibert/Emerson. (Inspection: RITES)

Supply of Tier-2 Router (08 WAN ports). Router should have dual power supply (48V DC/230V AC without any external adapter) along with all 36 associated accessories, power cable, console cable, manuals, mounting hardware etc. All other specification as per CRIS letter no. CRIS/HQ/NTWG/26/2023 CN dated 20.10.2023 & Railway Board's letter no. 2024/Tele/6(3)/1 dated 06.02.2026. Detail Specification in Annexure A attached. This item should be compatible with Tier 1 Router which will be installed by CRIS. Make: CISCO/ Juniper/ Nivetti/ HP/Techroutes or superior. (Inspection : RITES).

Supply of Tier-3/4 Router (04 WAN ports) along with all associated accessories, power cable, console cable, manuals, mounting hardware etc. All 37 other specification as per CRIS letter no. CRIS/HQ/NTWG/26/2023 CN dated 20.10.2023 & Railway Board's letter no. 2024/Tele/6(3)/1 dated 06.02.2026. Detail Specification in Annexure A attached. This item should be compatible with Tier 1 Router which will be installed by CRIS. Make: CISCO/ Juniper/ Nivetti/ HP/Techroutes or superior. (Inspection : RITES).

Supply of UTP CAT 6 Patch Cord, 3 Meters long factory crimped with suitable connector at both ends. It Shall comply to TEC GR No. TEC/GR/SLC - 01/02.AUG 05 (TEC Standard Number: TEC 52010:2005) with latest amendments,Version. Make: Schneider, Systemax, Panduit, D-Link, Molex. (Inspection: Consignee) .

C-Upgradation of UTN & FOIS devices over Tier - 2, 3 and 4 locations over Varanasi division in Connection with PRS Above/

Supply, Installation, Configuration, Testing and Commissioning of Tier-2 Router (08 WAN ports) along with all associated accessories, power cable, 1 console cable, manuals, mounting hardware etc. All other specification as per CRIS letter no. CRIS/HQ/NTWG/26/2023 CN dated 20.10.2023 & Railway Board's letter no. 2024/Tele/6(3)/1 dated 06.02.2026. Detail Specification in Annexure A attached.This item should be compatible with Tier 1 Router which will be installed by CRIS. Make: CISCO/ Juniper/ Nivetti/ HP/Techroutes or superior. (Inspection : RITES).

Supply, Installation, Configuration, Testing and Commissioning of Tier-3/4 Router (04 WAN ports) with all associated accessories, power cable, 2 console cable, manuals, mounting hardware etc. All other specification as per CRIS letter no. CRIS/HQ/NTWG/26/2023 CN dated 20.10.2023 & Railway Board's letter no. 2024/Tele/6(3)/1 dated 06.02.2026 . Detail Specification in Annexure A attached. This item should be compatible with Tier 1 Router which will be installed by CRIS. Make: CISCO/ Juniper/ Nivetti/ HP/Techroutes or superior. (Inspection : RITES).

Supply & Installation of rack mountable 24 port manageable Layer-2 switch 24 x 10/100/1000 BASE-T PoE+ ports, 2 Nos. 10G BASE-T ports and 2 3 Nos. 10G SFP+ ports Stackable Managed Switch. 370W PoE Power Budget from day1 and potential to be extended to 740 watt with all accessories as per RDSO spec. No:RDSO/SPN/TC/83/2020 Rev. 2.1 or latest. (Switch should be TTP approved and to be procured from TTP approved sources). All the accessories and fixing materials required for this installation are to be supplied by contractor within the same cost. Make: Cisco/Juniper/HP/Zyxel/Digisol or superior. (Inspection : RDSO)

Supply of 2 Mbps Leased Line Modem as per attached TEC Spec. Each Pair consisting V-35 unit with management Port (Item-G703 for up to 6 km on 0.5 mm dia copper cables, AC/DC Power) as per Technical Specification in Annexure A attached. Make/Brand: TEAMLINK 3002 G. SHDSL/ /MROTEK/Cygnus/Team link/D-link. (Inspection: RITES)

Supply of STP CAT-6 Cable (Shielded Twisted Pair) of 305 Mtr box compliant with latest EIA/TIA-568-B2-1 as per Technical Specification in Annexure A attached. Make: DLink/ DAX/ Lucent/ Crone/ Amp./ Sterlite/ Finolex/ Digilink/Dogisol. (Inspection: RITES)

Supply of UTP CAT 6 Patch Cord, 3 Meters long factory crimped with suitable connector at both ends. It Shall comply to TEC GR No. TEC/GR/SLC - 01/02.AUG 05 (TEC Standard Number: TEC 52010:2005) with latest amendments,Version. Make: Schneider, Systemax, Panduit, D-Link, Molex. (Inspection: Consignee) .

Supply of 30 Mbps 2W/4W LAN Extender supporting short & longer distance (up to10 kms or more) dual power supply AC/DC from a single socket plug in module in the stand alone unit to be accommodate in rack as per Technical Specification in Annexure A attached. Make: TEAMLINK 3002 VAYU 2W/4W/MROTEK/Cygnus/Team link/D-link. (Inspection: RITES)

Supply of 2MBPS E1 to Ethernet Convertor can operate on 230 VAC & 48 VDC as per Technical Specification in Annexure A attached. Make/ Brand: Techroute TD-CNV-ETH-E1/MROTEK/Cygnus/Team link/RAD/Anda Telecom/D-link. (Inspection: RITES)

Supply of STP/UTP RJ 45 Connectors. Make: D-Link/Digisol or superior. (Inspection: Consignee)

Supply and Fixing of PVC casing and capping/PVC pipe of minimum 25 mm size or higher as per requirement at site onthe wall/floor etc., using 10 bends, coupler and T joints andflexible pipe wherever necessary with fixture in the OFC room from equipment rack to common termination and from OFC room to SM room/Reservation office /Data logger/FOIS room etc. (All required material for fixing to be arranged by thec ontractor). Make: D Plast/Polypack/Polycab/Supreme/Astrol/AKG/Maruti Flexoplast/Austro Plastic or superior. (Inspection: Consignee)

Laying of power/communication/CAT/Speaker cable in the cable trenches, masonary ducts, RCC pipes, DWC pipes, PVC pipes, GI pipes etc as per instruction of site in charge."

Supply of 12 core single mode Fiber armoured Optic Cable (TYPE-I) for PRS/UTS network with all the accessories required for installation. It shall Comply to (TEC Standard Number-TEC 85170:2024). Make: MOLEX, AMP, Schneider, Systemax, Panduit, D-Link,Finolex.3M, TE connectivity, R&M. (Inspection: Consignee)

Supply of Gigabit Ethernet Media Converter Single Mode Single Fiber, SM, Sc, 1310nm, Transmission Type: 10/100/1000M FDX/HDX, Wavelength: Single mode: 1310/1550nm up to 20Km, Power Supply:External 1A,+5VDC, Connector: UTP: RJ-45 connector,Optical: SC connector (Single Fiber), with all 13 accessories like power adaptor. Make: DRON EDGE DE-SMBIDI-2025/Tech routes/Syrotech/D-Link/TP Link/Digisol or superior. (Inspection: Consignee)

Supply & installation of Layer 2 fully Managed switch (Minimum 8+2 ports with 2 nos. Gigabit SFP port) with loaded pluggable SFP modules (2 Nos.) 14 of same make of switch and 8 Nos. 10/100/1000 Mbps Ethernet port, POE+ support with all accessories as per clause 6.0 of RDSO spec RDSO/SPN/TC/83/2020 Rev 2.1 or latest & as per Technical Specification in Annexure A attached. (Switch should be TTP approved and to be procured from TTP approved sources). Make: Cisco/Juniper/HP/Zyxel/Digisol/D-Link or superior. (Inspection: Consignee)

Supply of Online UPS 1 KVA with battery backup 60 minutes as per Technical Specification in Annexure A attached. Make/Brand:Elnova- ES1004L/APC/ Uniline/ Microtek/ Amararaja /Luminous/Numeric/TATAlibert/Emerson or superior. (Inspection: RITES)

Supply of Fiber Distribution Management System 12 port, Single Mode, Simplex Fiber Optic Patch Panels, 19 inch 1 U Rack Mountable with SC connector with all accessories. Make: Molex/ iball/D-Link/ Syrotech/ Commscope/ Digisol/PANDUIT/3M/Raychem/TYCO (Inspection: Consignee).

Supply & Installation of NMS Maintenance Console (in form of Desktop) Intel Core i5 and MS Office with license pre installed with Standard Display 23 inch or higher & Onsite OEM warranty- Min. 3 Years as per Technical Specification in Annexure A attached. Make: HP ProOne 440 G9 AIO I5 13500 Win11P /DELL/LENOVO/ACER. (Inspection: RITES)

Supply & Installation of NMS LED Video Display Unit of size 55 inches, 4K UHD including wall mount kit as per Technical Specification in Annexure A attached. Make/Mode: Samsung-UA55U8100 FULXL/LG/SONY/Panasonic or superior. (Inspection: Consignee)

Supply & Installation of NMS All in one InkJet Color printer (Multi- Function: Print, Scan & Copy) with Fax, Wi-Fi & Auto Duplex facility as per Technical Specification in Annexure A attached. Make/Model: CANON All in One Printer G4780/HP/Epson/Brother. Inspection: Consignee

D-Provision for Network architecture alignment and replacement of age old datacom equipment over unified ticketing Above/

Supply, Installation and Commissioning of 4 WAN Port (2 X 1G Ethernet and 2X G.703/E1) and 2 X 1G Ethernet LAN Port Router with all accessories. 1 All other specification as per CRIS letter no. CRIS/HQ/NTWG/26/2023 CN dated 20.10.2023 & Railway Board's letter no. 2024/Tele/6(3)/1 dated 06.02.2026. Detailed Specifications in Annexure-A attached. This item should be compatible with Tier 1 Router which will be installed by CRIS. Make: CISCO/ Juniper/ Nivetti/ HP/Techroutes or superior. (Inspection : RITES)

Suply of 2 Mbps Leased Line Modem as per specification No. RDSO/SPN/TC/80/2020 Rev. 02 or latest, each pair consists of one G.703 and V.35 unit. Make/Brand: TEAMLINK/ /MROTEK/Cygnus/D-link. (Inspection: Consignee)

Supply & Installation of rack mountable 24 port manageable Layer-2 switch 24 x 10/100/1000 BASE-T PoE+ ports, 2 Nos. 10G BASE-T ports and 2 3 Nos. 10G SFP+ ports Stackable Managed Switch. 370W PoE Power Budget from day1 and potential to be extended to 740 watt with all accessories as per RDSO spec. No:RDSO/SPN/TC/83/2020 Rev. 2.1 or latest. (Switch should be TTP approved and to be procured from TTP approved sources). All the accessories and fixing materials required for this installation are to be supplied by contractor within the same cost. Make: Cisco/Juniper/HP/Zyxel/Digisol or superior. (Inspection : RDSO)

Supply, Installation and Commissioning of 8 WAN Port (2 X 1G Ethernet and 4X G.703/E1) and 2 X 1G Ethernet LAN Port Router. All other 4 specification as per CRIS letter no. CRIS/HQ/NTWG/26/2023 CN dated 20.10.2023 & Railway Board's letter no. 2024/Tele/6(3)/1 dated 06.02.2026. Detailed Specifications in Annexure-A attached. This item should be compatible with Tier 1 Router which will be installed by CRIS. Make: CISCO/ Juniper/ Nivetti/ HP/Techroutes or superior. (Inspection : RITES)

Supply & Installation/Testing of Terminal Server( TS), with 16 Terminal ports with 1500 V AC isolation on each terminal port, each unit supplied one AC power cord & one user manual as per Technical Specification in Annexure A attached. Make: Cygnus/team link or equivalent specification to Team Link-5088 16 Port. (Inspection: Consignee)

Supply of UTP Enhanced CAT-6 Cable (23 AWG). It Shall comply to TEC GR No.TEC/GR/SLC -01/02.AUG 05 (TEC Standard Number: TEC 52010:2005) with latest amendments, Version and as per Technical Specification in Annexure A attached. Make: Siemen/Systemax/DLink/ DAX/ Lucent/ Crone/ Amp./ Sterlite/ Finolex/ Digilink/Dogisol/Tyco/Krone. (Inspection: Consignee)

Supply of STP/UTP RJ 45 Connectors. Make: D-Link/Digisol or superior. (Inspection: Consignee)

Laying of CAT-6/OFC cable in PVC casing caping/pipe

Supply and fixing of different sizes of PVC casing /Pipes as required by Railway at site by fixing /clamping to the wall for indoor wiring purposes. Make: D Plast/ Polypack/ Polycab/ Supreme/Astrol/AKG/Maruti Flexoplast/Austro Plastic or superior. (Inspection: Consignee)

Supply of basic material and installation to to construct unit Maintenance Free Earth for Single Earth consisting as per Spec. No. RDSO/SPN/197/2016 Ver 1.0 or latest, bonding connections drawing no. SDO/ RDSO/E&B/002 for Desire Earth Resistance less than 1 (one) Ohms as per Technical Specification in Annexure A attached . (Inspection: Consignee).

Supply of Workstation Equipment (in form of Desktop) and MS Office with license along with Onsite OEM warranty- Min. 3 Years as per Technical Specification in Annexure A attached . (Inspection: Consignee).

Supply of Management Console (in form of Desktop) and MS Office with license along with Onsite OEM warranty- Min. 3 Years as per Technical Specification in Annexure A attached . (Inspection: Consignee).

Supply, installation, testing & commissioning of All in One (Monochrome Multifunction-Print/Copy/Scan) Laser printer for A4 Printing with Ethernet, USB and Wi-Fi, features along with 3 years warranty to printout the report of failure for analysis & reporting purpose. Make/Model: HP- M1005/MFP126nw/MFP136nw/CANON/Epson/Brother of having feature of minimum HP-M1005/MFP126nw/MFP136nw. (Inspection: Consignee)

Supply of Maintenance Table Steel size minimum 5 feet x 3 feet with storage compartment/drawer units, locker/cupboard type storage unit along with foot rest. (Inspection: Consignee)

Supply of Revolving Push Back Chair with height adjustable cushioned seat and back having armrestand revolving wheelbase. Make Godrej,Featherlite, Durian,Zuari, Nilkamal. (Inspection: Consignee)

Supply and Installation of Single fiber Single mode SFP of branded make, compatible with Switch/ Same make of switch i.e. item no. 3 of Schedule- D. SFP should be compatible with each other. (Inspection: Consignee)

Supply, installation, testing, wiring & commissioning of Router having ports WAN ports 04 Nos. of 10/100/1000 MB Base T Ethernet Ports, 04 Nos of 17 1000 MB SFP Slot and 4 nos. of E1 port along with dual power supply along with all associated acessories, power cable, Console cable mannuals Mounting hardware etc. Router also must be equiped with 4 X compatible SFP 1.25 GBPS Single Mode Dual fiber 20Km. Make: Preferred Make/ Model Techroutes TSR-2900- 40 or equivalent model with same specification in Juniper/HP/CISCO/Nivett or superior. (Inspection: Consignee)

Supply of I/O Box suitable for termination of CAT-6 UTP cable including back mount box, face plate & Modular jack. It Shall comply to TEC GR No. TEC/GR/SLC -01/02.AUG 05 (TEC Standard Number: TEC 52010:2005) with latest amendments, Version. Make: Legrand /Dlink/Molex/ iball/Syrotech/Commscope/Digisol or superior. (Inspection: Consignee)

Fixing of I/O Box