Supply and Delivery of 1 No Tractor and Trailer SHIVAM AGRICULTURE WORKS- SHIVAM AGRICULTURE WORKS Semi Trailer (Single Axle) with Tipping Platform of Capacity 5 tonne in Odaipatti Town Panchayat

Amount

Supply and Delivery of Mahindra Tractor Two Wheel Drive with Engine Power 39 HP Mahindra (MAHINDRA YUVO TECH+ 405DI )

Tractor model number - Mahindra

Tractor Engine capacity (cc) -2987

Type of Fuel - Diesel

Vehicle Emission Compliance -Bharat Stage

Colour of the Tractor-RED

Max Engine Power (HP)-42

Engine RPM at Max power-2000

Maximum Engine Torque (Nm)-180.70

Engine RPM at Max Torque (@rmm)-1000

Power Take - off (PTO) Type-Transmission

Maximum PTO Power (HP)-38.5

RPM at Maximum PTO Power-2000

Operator Station-Open Station

Engine Aspiration System-Natural

Engine Cooling-Wter Cooled

Fuel Injection-Inline

Fuel Tank Capacity (Ltrs) - 53.00 Litre

Length of Tractor Body (mm)-3740mm

Width of Tractor Body (mm)-1690mm

Ground Clearance (mm)-370mm

Wheel Base (mm)-1930mm

Size of Front Tyre with ply rating (mm)-6.00-16:8PR

Size of Rear Tyre with ply rating (mm)-13.6x28 12

Track width front (mm)-1220mm

Track Width Rear (mm)-1325mm

Tractor Transmission System-Constant Mesh

Number of Forward Gears/Setting-12

Type of Wheel Drive-Two Wheel

Driver Axle-Rear

Type of Steering-Power

Tractor Brake-Oil Immersed

Type of Clutch-Dry Clutch

Clutch Operation-Single

Lifting capacity at Hitch Point (kg)-1635.62kg

Turing Radius (mm)-3145mm

Warranty Time (Month)-24 month

Supply and Delivery of SHIVAM AGRICULTURE WORKS--SHIVAM AGRICULTURE WORKS Semi Trailer (Single Axle) with Tipping Platform of Capacity 5 tonne

Type of Trailer- Semi Trainer (Single Axle)

Type of Platform-Tipping Platform

side boards-Fixed Side Board

Capacity of Trailer (Tonnes)-5 Tonne

Axle Assembly Wheel Track(mm)-1500

Number of Wheels-2

Overall width of trailers between extreme points (meter)->1.75<=2

Overall width of trailer measured between extremepoints (meter) (Exact Value)-1.82m

Overall length of Platform->2.5<=3.5

Overall length of platform (meter) (Exact Value)-3.048m

Overall Height from supporting surface (ground) tothe top of the sideboard {As per clause 3 of AIS 112,The height of the trailer measured from the levelsupporting surface to the top of the sideboard in un-laden condition} (meter)->1.1.6<=2

Overall Height from supporting surface (ground) tothe top of the sideboard {As per clause 3 of AIS 112,The height of the trailer measured from the levelsupporting surface to the top of the sideboard in un-laden condition} (meter) (Exact Value)-1.8 m

Height from supporting surface (ground) to the topof the platform {As per clause 3 of AIS 112, Theheight of the trailer measured from the levelsupporting surface (ground) to the top of theplatform in un-laden condition} (meter)-1.21 m

Ground Clearance (mm)-300 mm

Construction 1. Material used for fabrication of trailer as perClause-5, Table-1 of IS:8213 (latest), 2. RetroRefl ective Marking (tapes) as per AIS -090, 3.Lighting and Lighting -signalling device as per AIS-062, 4. Trailers shall be fi tted with Rear Under RunProtective Device (RUPD) confi rming to IS 14812(latest), 5. The trailer shall be fi tted withpneumatic tyres and rims conforming to IS 13154(latest) or IS 15636 (latest) and IS 10694 (Part 6)(latest), 6. Trailers shall have service and parkingbrakes confi rming to requirements as specifi ed inAIS-043, 7. Hydraulic ram of suitable capacitycompatible with tractor hydraulic shall beprovided in case of tipping type. The ram may beused in single or tandem as per need and theoperating pressure shall not exceed 13.8 MPa, 8.Tipping angle of the body, in case of tipping type,shall be 42° to 50°, 9. In case of the balancedtrailer - the distance from the edge of theplatform to the centre of front wheel and fromrear edge of the platform to the centre of rearwheel shall be not more than 0.8 m, 10. The semi-trailer shall be provided with suitablearrangement in the front for keeping the trailer ina levelled position when detached from thetowing tractor.

Number of lashing hooks for towing down load-4

Painted Colour on the Trailer-Red

Certifi cation & Warranty

Conformity to standards-AIS 112(lates) and IS 8213 (latest)

Necessary clearance from RTO to be obtain before supply of trailer - Yes

Avaliability of test report from approved laboratory to prove conforming to specification as per AIS 112(latest) - Yes

Warranty (in months) - 24 Months

AK ENGINEERING (BID ID -1359257)