REPAIR/ REPLACEMENT OF OLD UNSV WIRING SUB MAIN WIRING DB S LED LIGHTS AND OTHER FITTING FIXTURES AND MANNING FOR ATTENDING DAY TO DAY COMPLAINTS AT TAG LOCATION (RESTRICTED OUT STATION) OF CABINET SECTT UNDER GE (E/M) BASE HOSPITAL DELHI CANTT-10

Amount

Outsourcing services for internal electrical supply, complaints of day to day maintenance of existing electrical point wiring, electrical fitting, short circuit, earth leakage, no light from DBs/ switch boards etc, repairs to all other electrical fittings/ fixures at site and make the electric supply functional in general shift from 0930 hrs to 1730 hrs comprising by deploying minimum three electrician daily incl Sunday/ Holiday including note down the complaints in complaint register, distribution to the tradesman, collection of maintenance store from store yard of electric section etc complete all as specified and directed.

Note: (a) All the T&P items like eight feet height aluminium folding self supported ladders, drill machines with bits, cutting plier, spanners, Allen key Set, Pipe wrench, Screw driver Sets, Crimping tool etc will be provided to electricians by the contractor. The cost of T&P shall be inciuded in quoted rates and no extra cost will be paid by department. Tool Bags required for attending the complaint shall also be provided by contractor to the tradesmen.

(b) All the stationery i.e complaint register, job card dockets and other connected register related to the work shall be arranged and to be maintained by the contractor.

(c) Stores required for day to day maintenance for all repair work on complaint basis shall be measure and paid as "Supply only" under respective item of this Schedule. . All sundries items like Insulation Tape, Screws, washers, Plastic wall rawal plugs, Nuts, Bolts, cotton waste, thimbles etc shall be supplied/ arranged by the contractor without any extra cost to Govt.

(d) All the retrieved material shall be the property of Contractor with Sch of credit as shown on credit schedule.

(e) Contractors are advised to visit the site before quoting rates.

(f) Contractor shall be penalised @ Rs. 200/- per complaint/ day, if he fails to attend and rectify the complaint within 8 hours of lodging the complaint either personally or telephonically. In this regard the decision of the Engr-in-Charge shall be final & binding.

(g) Contractor shall provide the full manpower otherwise recovery Rs 1000 per person per day shall be recovered from the contractor dues.

(h) The employed electrician should be qualified with ITC in concerned trade and shall have minimum 03 years experience in internal electrification services.

(j) Work shall be carried out as per modern engineering practice including day to day maintenance record register, duty roster, attendance register etc complete alongwith general tool safety measures on conveyance/ transportation uniform etc.

(k) Contractor will submit the nominal roll and qualification of electricians within 15 days of acceptance and get them approval from Engr-in-Charge in writing After that period a sum of Rs 500 per day shall be recovered from the contractor dues.

(l) all workers shall wear proper uniform and cost of same is deemed to be included in quoted rates, failing which recovery of Rs 200 per person per day shall be recovered from the contractor.

(m) Any stores required for rectification of electric complaints other than item mentioned in CA as provided by the department shall also required to be fixed by the persons employed under subject CA without any extra cost to the department.

(n) All consumable items like cotton waste, PVC insulation tape, thimbles, nut bolts, screws are deemed to be included in quoted rate.

(o) The material under this contract which is as "Supply only" be consumed under this item described here above.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc and making good disturbed surfaces of walls, floors etc. Complete all as specified and as directed.

taking down old UNSV recess/ surface type distribution board SP/ SPN type from wall etc.

taking down old UNSV recess/ surface type distribution board TPN type from wall etc.

M&L for point wiring surface type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, GI metal flush box of 1.60 mm thick suitable for modular/ conventional switches/ sockets/ fan regulators with cover plates (modular/ conventional type as required), blanking plates, brass screws, cup washers etc including all cutting/ chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings.

One light point controlled by one switch.

One ceiling/exhaust fan point controlled by one switch.

One socket outlet 5 Amps controlled by one switch on same board.

One socket outlet 5 Amps controlled by one switch on independent board.

All as per serial item No 5 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 2.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire.

All as per item No. 5 above but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 4 sqm mm PVC insulated unsheathed copper cable as earth continuity conductor.

M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, GI metal flush box of 1.60 mm thick suitable for modular/conventional switches/sockets/fan regulators with cover plates (modular/ conventional type as required), blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings:-

One light point controlled by one switch

One ceiling/exhaust fan point controlled by one switch

One socket outlet 5 Amps controlled by one switch on same board

One socket outlet 5 Amps controlled by one switch on independent board

One bell point controlled by one bell push switch

One light point controlled by two 2-way switch

All as per serial item No 8 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 2.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire.

All as per item No. 8 above but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 4 Sqmm PVC insulated unsheathed copper cable as earth continuity conductor

M&L for point wiring in existing conduit with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into existing rigid non-metallic conduit of 20mm dia or higher, GI metal flush box of 1.60 mm thick suitable for modular/conventional switches/ sockets/ fan regulators with cover plates (modular/ conventional type as required), blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :-

One light point controlled by one switch

One ceiling/exhaust fan point controlled by one switch

One socket outlet 5 Amps controlled by one switch on same board

One socket outlet 5 Amps controlled by one switch on independent board

One bell point controlled by one bell push switch

One light point controlled by two 2-way switch

All as per serial item No 11 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 2.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire.

S&F modular Switch Piano single Module 6 Amp, one way complete all as specified and directed.

S&F Modular switch piano, single pole 16 Amps one module complete all as specified and directed.

S&F modular socket outlet 2-in-1, 3 pin, 6 & 16 Amp, two module complete all as specified and directed.

S&F modular socket outlet 2-in-1, 3 pin, 6 Amp, two module, complete all as specified and directed.

S&F modular step type fan regulator 120 watt, two module socket type, complete all as specified and directed.

S&F modolar Bell push 6 Amp 230 volt, one module complete all as specified and directed.

S&F modular switch, flush type 6 Amp 230 volts single pole, two way, one module complete all as specified and directed.

S&F Switch Piano flush type, single pole, one way 5/6 Amp complete all as specified and as directed.

S&F switch piano, flush type, single pole, one way 15/16 Amps complete all as specified.

S&F 6 Amp, 2-in-1 Switch Socket Combined with box complete all as specified and as directed.

S&F in replacement of 16 Amp & 6 Amp, combined unit box with 2 fixing holes complete all as specified and as directed.

S&F ceiling rose, 6 Amps, 250 volts, AC with three terminals and PVC/ Polycarbonate insulated body of 50 x 25mm size complete all as specified and directed.

Supply only in replacement step type fan regulator 100 watt, flush socket type, complete all as specified and directed.

Supply only in replacement of modular step type fan regulator 100 watt, switch type one module, complete all as specified and directed.

Supply only in replacement of modular step type fan regulator 120 Watt, two module, complete all as specified and directed.

Supply only in replacement of modular 16 Amp switch & modular socked 6/ 16 Amp with combined unit box 3 module complete all as specified and as directed.

Supply only in replacement of modular 6 Amp, 2-in-1 Switch and Socket with Combined box 3 module complete all as specified and as directed.

Supply only in replacement of Switch Piano flush type, single pole, one way 5 Amp complete all as specified and as directed.

Supply only in replacement of switch piano, flush type, single pole, one way 15 Amps 2 fixing holes complete all as specified.

Supply only in replacement of socket out let 2-in-1 pin 5 Amps complete all as specified and as directed.

Supply only in replacement of socket outlet 2-in-1, 3 pin, 5 and 15 Amps, flush type of 2 fixing holes complete all as specified and as directed.

Supply only in replacement of modular Switch, single Module 6 Amp complete all as specified and as directed.

Supply only in replacement of Modular switch , single module 16 amps complete all as specified and as directed.

Supply only in replacement of modular socket outlet 2-in-1, 3 pin, 6 & 16 Amp, flush type complete all as specified.

Supply only in replacement of modular socket outlet 2-in-1, 3 pin, 6 Amp, flush type complete all as specified and as directed.

Supply only in replacement modular switch 6 Amp, 2 way 230 Volt complete all as specified and as directed.

Supply only in replacement Bell push, flush type 5 Amps 230 Volts complete all as specified and directed.

Supply only in replacement modular bell push 6 Amp, 230 Volts complete all as specified and as directed.

Supply only in replacement ding dong bell, AC, 230 Volts, single pole complete all as specified and directed.

Supply only in replacement of modular white cover with frame 12 modules (2x6 module) suitable for fixing of modular switches/ sockets complete all as specified and directed.

Supply only in replacement of modular white cover plate with frame 8 modules (2x4 module) suitable for fixing of modular switches/ sockets, complete all as specified and directed.

Supply only in replacement of modular white cover plate and with frame 6 module suitable for fixing of modular switches/sockets complete all as specified and directed.

Supply only in replacement of modular white plate and cover suitable for fixing of modular switches/ sockets, 3 modules complete all as specified and directed.

Supply only in replacement lamp holder, 230 Volt AC, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed

Supply only in replacement ceiling rose, 6 Amps, 250 volts, AC with three terminals and PVC/ Polycarbonate insulated body of 50 x 25mm size complete all as specified and directed.

Supply only in replacement of Metal clad plug top 20 Amp 2P+E, 240 Volts complete all as specified and directed.

Supply only in replacement of Metal clad Socket 20 Amp 2P+E, 240 volts complete all as specified and directed.

S&F in replacement of PVC Non metallic conduit of external dia 20 mm medium grade including of all tees, bends elbow, reducers bell mouth tube end and fixing accessories such as coupler, lock nuts, saddles, pipe hooks etc but exclusive of junction boxes complete all as specified and directed.

All as per Srl item No 50 here-in-before but 25 mm dia.

All as per Srl item No 50 here-in-before but 32 mm dia.

Supply only in replacement of PVC casing capping of size 20 mm including of all tees, bends elbow reducers bell mouth tube end and fixing accessories complete all as specified and directed.

All as per Srl item No 53 here-in-before but 25 mm dia.

Supply only in replacement of PVC box suitable for fixing of modular Switches/ sockets of 3 modules complete all as specified and directed.

S&F in replacement of premium quality Red/ Green 0.5 watt LED light 220/ 240 Volt complete all as specified and directed.

Supply only in replacement of single core copper conductor PVC insulated unsheathed FRLS 1100 Volt grade flexible 1.5 Sqmm size, multistranded unsheathed complete in red, blue, black, yellow, green colour all as specified and as directed.

All as per ser item No. 57 here-in- before but 2.5 Sqmm.

All as per ser item No. 57 here-in- before but 4 Sqmm.

All as per ser item No. 57 here-in- before but 6 Sqmm.

All as per ser item No. 57 here-in- before but 10 Sqmm.

Supply only in replacement of Three core flexible copper conductor PVC insulated unsheathed FRLS 1100 Volt grade 1.5 Sqmm size, multistranded unsheathed complete all as specified and as directed.

Supply only in replacement PVC insulated and sheathed flexible cable 3 core multi-stranded copper conductor size 2.5 Sqmm 1100 volt grade after taking out old unserviceable one including electric connection complete all as specified and directed

Supply only in replacement of three core copper conductor PVC insulated and PVC round sheathed 1100 Volt grade flexible industrial cable 4 Sqmm size, multicore complete all as specified and as directed.

Supply only in replacement of Twin core twisted flexible copper conductor PVC insulated unsheathed flexible 0.75 Sqmm size, multistranded complete all as specified and as directed.

Supply only in replcement PVC flexible twin twisted copper conductor cable multi strand of size 0.5 sqmm nominal cross section complete

Supply only in replacement of Twin core round/ flat flexible copper conductor PVC insulated unsheathed flexible 0.50 Sqmm size, multistranded complete all as specified and as directed.

M&L in replacement Sub main wiring complete with 2x4 Sqmm, single core, multi stranded copper conductor FRLS PVC insulated and sheathed cable 1100 Volts grade, drawn including PVC concealed/ surface conduit along walls roofs etc including 4 sqmm size PVC insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed. Note :- 2 Run of 4 sqmm wire with conduit & 1 run of earth wire shall be measured as one RM.

All as per Srl item No 68 here-in-before but 2 x 6Sqmm and 1 x 6 Sqmm for earth wire.

S&F MCB DB, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete for the following.

S&F loadline distribution box 4 way, AC, TP & neutral metal enclosure, Glazed double dooor, 415 V, AC, IP-43, concealed type with suitable bus bar, neutral link, earth link suitable for MCCB 63/ 100 Amps as incomer and MCB SP as out going completeand making good disturbed surface all as directed

S&F distribution box 4 way, AC, TP & neutral metal enclosure, Glazed double dooor, 415 V, AC, IP-43, concealed type with suitable bus bar, neutral link, earth link suitable for MCB 63/100 Amps TPN as incomer and MCB SP as out going complete and making good disturbed surface all as directed.

S&F DB VTPN 8 way IP 43 IK-09 with metal double door suitable for Provision of MCCB 125 Amp,housing MCB's complete and making good disturbed surface all as specified and as directed.

Supply only in replacement of MCB TPN 63 Amps 10 KA complete all as specified and directed.

Supply only in replacement of MCB TP 63 Amps 10 KA all as specified and as directed.

Supply only in replacement of MCB TPN (FP) 100 Amps 10 KA complete all as specified and directed.

S&F in replacement of sheet metal enclosure with socket plug top, single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP 25Amp of capacity 20P+E Amps complete and making good disturbed surface all as specified and directed.

Supply only in replacement MCB DP/ SPN, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete of following rating.

Supply only in replcement MCB SP, 240 Volts, AC, 6 to 32 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete.

S&F MCCB 4 Pole, 415 volt, AC, fixed type, with breaking capacity 16 KA with incoming and outgoing spreader extentions ang Aluminium lugs suitable for load line DB & connection complete of following rating.

125 Amps rating

100 Amps rating

Supply only in replacement or fixing or passing through pipe, 1100 volts grade PVC insulated aluminium stranded conductor cable served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circuler for the following size of cables:-

S&F in replacement of energy efficient LED Round shape surface mounted downlight fitting 15 to 18 Watt, 230 Volt of 6000 K couler temp, decorative ultra slim linear LED lighting fixture with extruded Al. heat sink, environmental friendly, energy efficient, wall mounted batten integrated electronic driver complete all as specified and directed.(Havells Cat No ENDURANEOSURFACEDLS18WLED857S or equivalent model of the make as per PS.

S&F in replacement LED Recess mounted 2x2 ft luminaire fitting LED 34/36 Watt cast aluminium housing, toughened glass, silicon gasket, 6000K high power LED with lens for uniform istribution pre-wired and electric connection with suitable size of stranded copper flexible PVC insulated wire including clamps and nut bolts for fixing complete all as specified and directed. (Make - havells Cat No:- PLUTONEO2X2PLR34WLED857S or equivalent in Philips/ Wipro)

S&F in replacement LED Recess mounted 2x2 ft luminaire fitting LED warm white (WW) 34/36 Watt cast aluminium housing, toughened glass, silicon gaskect, 3000K high power LED with lens for uniform istribution pre-wired and electric connection with suitable size of stranded copper flexible PVC insulated wire including clamps and nut bolts for fixing complete all as specified and directed. (Make - Havells Cat No:- PLUTONEO2X2PLR34WLED840S or equivalent model of the make as per PS.

S&F in replacement LED Recess mounted 4X1 ft luminaire fitting LED 34/36 Watt cast aluminium housing, toughened glass, silicon gasket, 6000K high power LED with lens for uniform istribution pre-wired and electric connection with suitable size of stranded copper flexible PVC insulated wire including clamps and nut bolts for fixing complete all as specified and directed. (Make - Havells Cat No:- PLUTONEO4X1PLR36WLED857S or equivalent model of the make as per PS.

S&F in replacement LED Surface mounted 4X1 ft luminaire fitting LED 34/36 Watt cast aluminium housing, toughened glass,silicon gaskect, 6000K high power LED with lens for uniform istribution pre-wired and electric connection with suitable size of stranded copper flexible PVC insulated wire including clamps and nut bolts for fixing complete all as specified and directed. (Make - Havells Cat No:- PLUTOSURFACE4X1PLS34WLED857S or equivalent model of the make as per PS.

Supply only in replacement of Photon ultra LED tubelight Single side connection 20W suitable for 1x20w T5/T8 fittings and pre-wired electric connection fixing complete all as specified and directed. (Make - Havells Cat No:- photonultrae2.01213T8sstl20wled865spc or equivalent model of the make as per PS.

S&F in repair LED Bulkhead luminaire 10 watt of polycarbonate housing and enclosed with acrylic diffuser IP-65 protection incl connection complete all as specified & directed.

S&F in repair LED Post top lantern luminaire with die cast aluminium spigot, lid cover and clear acrylic cover 40 watt, 5700 K with IP-65 protection incl connection complete (Make: Crompton cat Pt No LPTO-40-CDL or equivalent model of the make as per PS.

Supply only in repair wall mounted LED batten with aluminium housing and integrated electronic drive 22 watt x 4 feet provided for efficient heat dissipation with polycorbonate diffuser with all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair surface and wall mounted LED batten 10 watt 2 feet long extruded aluminium housing provided for efficient heat dessipation with polycarbonate diffusser and integrated electronic drive, pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair wall mounting bracket decorative luminaire powder coated housing, SS finish fixture with opal glass diffuser suitable for GLS, B-22 lamp incl connection complete all as directed (Make- Havells code-LHJC02108499 or equivalent model of the make as per PS.

S&F in repair highly efficient round/square shape low depth Powder coated Aluminium body recess mounted LED downlighter 18 to 22 Watt, 240 volt, CCT 5700 K, high quality LPG & PMMA diffuser with driver incl connection complete.

S&F (in replacement) LED landscape bollard light 10 watt, 230 Volt, inverted pyramid tripod type with soft 360 degree distribution, IP-65 protection, height 600 mm maximum incl necessary civil work for grouting & foundation work of suitable size with PCC 1:3:6 complete all as specified and directed.

S&F (in replacement) LED bollard light 9-12 watt, B22 LED Lamp, 230 volt, with soft 360 degree distribution, IP-65/IP 54 protection, height 348 mm maximum suitable for existing pipe 50 mm dia complete all as specified and directed (Make : Havells Cat part No-UHFHASE1TL4K015 or equivalent model of the make as per PS.

S&F in repair 5/ 6 W LED attractive wall mounted type mirror Stainless Steel frame, all accessories pre wired including up with twin core flat flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F LED Bed side reading stainless steel wall light fitting 3/5 Watts, 230 volt, AC, rectangular/ round, flexible neck/ Gooreneck, cool day light complete with all accessories incl connection complete (Make : As per sample as approved by GE)

S&F in repair surface/ ceiling mounted LED panel type of size 2ft x 2ft, 36W, 230V, 5700K complete with driver full window glarefree opal diffuser LED panel with CRCA powder coated white housing complete with all accessories required for connection and making good the disturbed ceiling complete (Make- Havells Cat Part No- PLUTOSURFACE2X2PLS36WLED857S/ Wipro Cat part No- CRCO10R038HP57GL1 / Phillips Cat part no- SM365C LED32-6500 PSU OD WH)

S&F in repair surface/ ceiling mounted LED panel type of size 1 ft x 1 ft, 18 W, 230V, 5700K complete with driver full window glarefree opal diffuser LED panel with CRCA powder coated white housing complete with all accessories required for connection and making good the disturbed ceiling complete (Make- Havells cat Part No- PLUTOSURFACE1X1PLS18WLED857S or equivalent model of the make as per PS.

S&F in repair of LED linear surface/ suspended fittings, extruded aluminium body with opal polycarbonate diffuser, 38 watt, 4 ft long, CCT 6000 K incl connection complete (Make- Polycab product code PMD0403004 or equivalent model of the make as per PS.

S&F in replacement LED Slim desgn recssed round/ square down lighter 5/6 watt with high efficiency PMMA diffuser and Superior light output and integral driver complete all as specified and directed.

S&F in repair LED energy efficient flood light of 30 watt, 230 volt, anti glare diffuser, IP-65 incl connection complete all as specified & directed.

Supply only LED Lamp 9 Watt, invertor type with 30 minute back up 230 volts, B-22 cap complete all as specified and directed.

Supply only LED Lamp 18 Watt, 230 volts, B-22 cap complete all as speicifed and directed.

S&F electronic energy meter, current rating 10-60 Amps, 240 Volt, AC, single phase, 2 Wire, accuracy Class 1.0, with LCD display incl/ fitted with temper proof meter box, weather proof, transparent, made out of FR polycarbonate, dust proof, good mechanical strength conforming to IS: 14772/2000, IP-65, size not less than 260 mm x 190 mm x 120 mm incl connection and depositing old meter to MES store complete all as directed (Make- Secure/ Schneider/ L&T/ Havells)

M&L for earthing with Galvanised Steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using GI wire of size 4mm dia as earthing lead (upto the body of the equipment) by means of GI bolts, nuts, check nuts and washers and thimbles and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 5 of SSR 1991(Part-I) complete.

S&F in replacement electric storage type Water Heater (Geyser) 25 ltr capacity, 5 star complete all as specified. Make- Havells Senzo/ Racold Eterno/ Crompton Solarium Neo

Taking down carefully electric geyser of any type and capacity by disconnecting electric and water supply connection, opening nut, bolt, washer and reassembling after cleaning and replacing defective parts and re-installing the same in original position and making necessary electric and water supply connection and testing complete all as specified and directed. (Note: Spare items shall be measured and paid seperately)

S&F geyser inner water tank 35/ 50 Ltrs capacity steel body as per sample, duly tested complete all as specified and directed.

All as per above item no 109 but 25 Ltrs capacity

S&F heating element capacity 1.5 KW (Round/ Triangular) ISI marked suitable for geyser (as per sample) complete all as specified and diredted. (Make : as per sample/ make as per existing geyser)

All as per above item no 111 but capacity 2 KW

S&F thermostat suitable for 50/35/25 ltrs capacity geysers (Make :- as per sample/ make of existing geyser)

S&F Heavy duty hot water connection pipe, SS rope threaded type with brass unions at both ends, 45cm long 15mm bore suitable upto 96 degree Centigrade temp complete all as specified and directed.

S&F indicator lamp, Red/ Green suitable for geyser of any type/capacity complete all as specified and directed. (Make as per sample)

S&F geyser base plate assembly in stainless steel of any type (having 6 or 9 hole) any model complete all as specified and directed (Make as per sample)

S&F in replacement of outer cover of MS sheet/ ABS body for geysers 25 to 50 Ltrs capacity complete all as specified and directed.

S&F in repair Plug top, 3 pin, 05 Amps, 230 volt complete all as specified and directed

S&F in repair Plug top, 3 pin, 15 Amps, 230 volt complete all as specified and directed

Supply and laying or fixing or passing through pipe in repair of 1100V grade, heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 10 sqmm 2 core nominal cross section complete all as specified and directed.

Supply and laying or fixing or passing through pipe in repair of 1100V grade, heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 16sqmm 4 core nominal cross section complete all as specified and directed.

S&F in repair of precast RCC earthing pit with CI cover ISI marked including angle iron frame made out of 35x35x4mm thick for supporting the edges of pit cover as dimension shown in Electrical plate No-2 of SSR part-I complete all as specified & directed.

Supply and fixing in repair power saving BLDC type ceiling fan 1200 mm sweep, 230 volts, 5 star rated, watt- 32 max, RPM- 370, Air delivery- 220 cmm, with blades, down rod complete all as specified and directed.

M&L for dismantling of unsv Ceiling Fan/ Exhaust Fan of any make/ model/ sweep for repair and refixing the same after repair.

M & L for cutting and removing the old defective/ burnt winding, cleaning the core of ceiling fan motor and rewinding the fan motor with super enamelled copper winding wire of same gauge with insulating material and varnishing the core assembly, drying the moisture content to get appropricate speed and re-assemble the same complete all as directed (Note:- The cost of copper winding wire is deemed to be included in the quoted rate)

All as per above Item No 125 but for exhaust fan upto 300mm sweep size

All as per above Item No 125 but for exhaust fan of 380/450mm sweep size

M&L in repair ball bearing suitable for any type/ size/ make of Celing fan/ Exhaust Fan complete all as directed (Make : NBC/ SKF)

S&F in repair capacitor 2.5/ 3.15 MFD suitable for C/fan incl connection complete all as specified and directed.

S&F steel fan blade assebly suitable for Exhaust fan 300 mm sweep of any make complete all as specified and directed.

Supply and fifing steel fan blade assebly suitable for Exhaust fan 380/450 mm sweep of any make complete all as specified and directed.

M&L for taking down carefully window/split type Air conditioner 2/ 1.5 Ton capacity of any type/ make from window/wall and removing front grills, air filters and cleaning, removing dust, washing and servicing with chemical wash of cooling and condenser coil and re-assembling the dismantled components and fixing to its original position complete all as specified.

M&L for servicing of water cooler of any capacity, any type/make including disconnection of electric /water supply connectin and servicing with washing, removing dust and fixing its original position including electric and water connection complete all as specified and directed.

M&L for charging of refrigerant R-22/ R-410 or any other recommended refrigerant gas in 1.5/2 Ton window/split Air conditioner/ Refrigerator/ Deep Freezer/ Water Cooler any cap including detecting leakage and rectify the leakage with proper brazing and testing on full load compelete all as specified and directed.

S&F in repair starting/running capacitor 35 to 50 MFD, 240 volt suitable for water cooler/ window AC/ split AC including connection complete all as specified and directed (Make : Havells/ USHA/ Tibcon/ Epcos/ Arcos/ Indtech)

S&F in repair starting relay suitable for air conditioner 1.5/ 2 Ton/ Water cooler/ Deep Freezer/ Refrigerator any cap complete all as specified and directed (Make : HI-Tech/ Classic/ Techunsh/ Renutrol)

S&F in repair fan motor assembly of water cooler any cap of cooling capacity 40 to 80 ltr per hour including all accessories complete all as specified and directed (Make : AUE/ AE/ Electra/ Khetan/ Orkash/ Aarti/ Krishna/ TMA)

S&F in repair magnetic contactor, 30 Amp FL 40 Amp, single pole, 208-240 V AC, 50/60 Hz for split/ window air conditioner incl connection complete all as specified & directed.

M&L for powder coating paint on water cooler/ refrigerator/ Deep freezer upto 310 ltr capacity including minor denting and welding as required complete all as specified and directed.

M&L for replacement of fan blower motor copper wound of window type air conditioner 1.5 / 2 ton capacity with same rating 220/230 volt complete all as directed (Make: AE/ Electra/ CG/ JBB/ Arihant/ SS Trading)

M&L for replacement of fan blower motor blade of window type air conditioner 1.5 / 2 ton capacity (Make: AE/ Electra/ CG/ JBB/ Arihant/ SS Trading)

S&F in replacement of thermostat switch suitable for window/ split air conditioner, ISI marked of any make all as specified and directed.

S&F in replacement of thermostat switch with knob suitable for water cooler, ISI marked of any make/ type capacity including making electric connection complete all as specified and directed.

M&L in repair copper tubing 1/2" dia with existing gauge for suction/ discharge line of split air conditioner of 1.5 Ton/ 2Ton capacity including high quality puf insulation complete.

All as per Srl item No 144 above but size 3/8" dia

S&F in repair outdoor unit suitable for 1.5 Ton split AC including rotary type compressor, high EER, copper material condenser unit, eco friendly refrigerent etc with all accessories complete in all respect all as directed (Make : Hitachi/ LG/ Voltas/ Blue Star/ GE/ Carrier)

S&F in repair of cromium plated brass push cock 15mm dia, ISI Marked, for water cooler complete all as directed.

S&F in replacement Motor single phase, 1/5 HP capacity for split type /window type AC 1.5/2.0 ton capacity complete all as directed (Make : As per sample/ make)

S&F in replacement hermetically sealed rotary type compressor unit of capacity 1.5/ 2 T for split/window type AC and charging of adequate quantity of refrigerant gas and testing on completion complete (Make : Blue Star/ Carrier/ Kirloskar/ Hitachi/ Mitsubishi/ Dakin)

All as per Srl item No 149 above but for water cooler of any capacity/ make

S&F in repair Power Circuit Board (PCB) suitable for split/ window type AC of capacity 1.5TR / 2.0 TR with all standard features i.e. power on-off, fan cooling speed, timer, temp etc complete all as directed. Make: Hitachi/ LG/ Carrier/ GE/ Blue Star/ Voltas)

S&F in repair copper condensing unit of split air conditioning cooling coil unit 1.5/ 2 ton of any make complete all as directed (Charging of refrigerant will be measured and paid separately) . Make : Hitachi/ LG/ Carrier/ GE/ Voltas/ Blue Star)

S&F in replacement of front grill of window type air conditioner 1.5 ton, any make/ type complete all as directed.

S&F in repair indoor unit suitable for 1.5 Ton split AC with PCB, LCD with temperature remote controller, noise level not less than 50 db etc with all accessories complete in all respect all as directed (Make : Hitachi/ LG/ Carrier/ GE)

S&F in repair wall mounting fan 400 mm sweep, adjustable, plastic blade grill for protection, pull cord control for speed and oscillation on-off, ABS body incl connection and old to be deposited in store yard complete all as specified and directed.

S&F in repair pedestal fan 500 mm sweep with strong copper wound motor for better air delievery, smooth oscillation, superior low voltage performance, heavy base for stability, 3 speed control regulator, speed not less than 1400 RPM and old to be deposited in store yard complete all as specified and directed.

S&F heavy duty Exhaust fan 450 mm sweep, 230 Volts, copper wound motor, 1300 to 1400 RPM with louvers and cutting, cheasing existing hole to fit properly and making good distrubed surface and electric connection with three core flexile cable 1.5 Sqmm complete all as specified and directed.

Supply and fixing heavy duty Exhaust fan 380 mm sweep, 230 Volts, copper wound motor, 1300 to 1400 RPM with louvers and cutting, cheasing existing hole to fit properly and making good distrubed surface and electric connection with three core flexile cable 1.5 Sqmm complete all as specified and directed

Supply and fixing heavy duty Exhaust fan 300 mm sweep, 230 Volts, copper wound motor 1300 to 1400 RPM with louvers and cutting existing hole to fit properly and making good distrubed surface and electric connection with three core flexile cable 1.5 Sqmm complete all as specified and directed.

Supply and fixing high speed Exhaust fan 225/230 mm sweep, 230 Volts, copper wound motor 1300 to 1400 RPM with metal blade and guard and cutting existing hole to fit properly and making good distrubed surface and electric connection with three core flexile cable 1.5 Sqmm complete all as specified and directed.

Supply and fixing Ventilating fan 250 mm sweep, 230 Volts, 1300 to 1400 RPM with high quality engineering plastic body and cutting existing hole to fit properly and making good distrubed surface and electric connection with three core flexile cable 1.5 Sqmm complete all as specified and directed.

S&F 6mm thick plywood sheet (ISI marked), waterproof fixed in window of required size including cutting for passing air of desert cooler complete all as directed.

S&F in repair plastic submersible pump suitable for desert cooler any size complete all as directed (Make: Khaitan/ Crompton/ Bajaj)

S&F desert cooler pad (set of three) made out of wood wool etc for desert cooler any size complete all as specified and directed.

S&F in repair fan motor kit assembly of 500 mm sweep, single phase, not less than 145 watt, 230 volt, AC, 50 Hz, copper wound with blade for desert cooler complete all as directed (Make: Khaitan/ Crompton/ Havells)

Supply only bottle neck copper terminal/ lugs of size 1.5 sqmm complete all as specified and directed

Supply only bottle neck copper terminal/ lugs of size 2.5 sqmm complete all as specified and directed

Supply only bottle neck copper terminal/ lugs of size 4 sqmm complete all as specified and directed

Supply only bottle neck copper terminal/ lugs of size 6 sqmm complete all as specified and directed

Supply only bottle neck copper terminal/ lugs of size 10 sqmm complete all as specified and directed

S&F in repair of filter drier having 10 micron outlet filter,100 % molecular sieve to maximize water absorption suitable for R-22/ R-407C or any type refrigerant gas all as specified and directed.

M&L in replacement of condensing cooling fan motor, 1 HP, single phase with copper winding complete all as specified and directed.

S&F in repair addressable type Smoke detector with neon bulb indication suited to detect slow smoldering fires in the range 0.4 to 10 micron & operation temp 60 degree centigrade with in 15 feet distance complete all as specified and directed. Make- Honeywell/ Morley/ Eaton

S&F in repair addressable type Heat detector with neon bulb indication, operation temp 58 and rate of rise 10 degree centigrade per minute, complete all as specified and directed. Make- Honeywell/ Morley/ Eaton

S&F in repair addressable Manual call point round/ square shape EN 54 Part 11, type A with biocolor LED enable Red & give visual indication of device healthy fire fault isolation in use test mode, IP-76, complete all as specified and directed. Make- Honeywell/ Morley/ Eaton.

S&F in repair Response indicator with neon bulb indication, Make: Honeywell/ Morley/ Eaton

Supply only SS self threating screw 35 mm long complete all as specified and directed

Supply only SS self threating screw 50 mm long complete all as specified and directed

Supply only high grade drywall screw 3.5 mm dia x 50 mm long, metalic finish complete all as specified and directed

Supply only high grade drywall screw 3.5 mm dia x 65 mm long, metalic finish complete all as specified and directed

Supply only high grade GI Saddle with base complete for 20 mm dia conduit pipe complete all as specified and directed .

Supply only high grade GI Saddle with base completefor 25 mm dia conduit pipe complete all as specified and directed.

Supply only high grade GI Saddle with base completefor 32 mm dia conduit pipe complete all as specified and directed

Supply only high grade PVC Junction box cover 65 mm dia complete all as specified and directed

S&F modular GI flush Box 3 module including making good disturbed surface complete all as specified and directed. Make: Anchor Roma/ Crabtree/ Legrand/ Schneider/ L&T/ GE/ Capsal.

S&F modular GI flush Box 6 module including making good disturbed surface complete all as specified and directed. Make: Anchor Roma/ Crabtree/ Legrand/ Schneider/ L&T/ GE/ Capsal.

S&F modular GI flush Box 4x2 module including making good disturbed surface complete all as specified and directed Make: Anchor Roma/ Crabtree/ Legrand/ Schneider/ L&T/ GE/ Capsal.

S&F modular GI flush Box 6x2 module including making good disturbed surface complete all as specified and directed. Make: Anchor Roma/ Crabtree/ Legrand/ Schneider/ L&T/ GE/ Capsal.

Supply only in replacement premium quality Anchor Fastner 10 mm dia x 100 mm long. Make: Lovely/ Aldahome/ Kapsi

Suply only modular motor starter 25 Amp, 230 Volt, 2 module. Make: Anchor Roma/ Crabtree/ L&T/ GE/ Legrand/ Schneider

M/S GEETANJALI ENTERPRISES

GLIBS CONSTRUCTION

SETHI ENTERPRISES

KRISHANA ELECTRIC WORKS

SANJEEV ENTERPRISES