SPECIAL REPAIR TO CHANGE OF WATER SUPPLY PIPELINE AT AA AND OTHER SANCTIONED WORK UNDER GE (WEST) FEROZEPUR CANTT

Amount

Dismantling brick work built in cement mortar of any specification and in any position complete all as specified.

Material and labour Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

Material and labour brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified.

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as specified and directed.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified.

Material and labour for brushing neat cement slurry with 3 kg of cement per Sqm

Material and labour 10 mm thick screed bed or bedding layer of mortar in CM(1:4) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane. Note: WPC shall be measured and paid separately

Supply only water proofing compound.

Material and labour For APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) Laid on primed surface by forced application including bitumen primer complete all as specified.

Material and labour Tack coat of industrial bitumen 85/25 @ 1.20 Kilogram per square metre over a coat of bitumen primer @ 0.30 litre per square metre including preparation of roof surfaces complete all as specified and directed

Material and labour for 80mm thick average consolidated thickness mud phuska on flat roof ncluding 25mm thick mud plaster complete.

Supply and fixing 40 mm thick brick tiles laid on mud mortar and joints grouted flus in cement mortar(1:3) mixed with 5% of crude oil by wt of cement on mud phuska complete all as specified and directed.

All as item No 12 here in before but except tiles

Material and labour Plain cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in , kerbs, mud stop, rounded or chamfered on edges including form work complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises.

Material and labour for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.06 sq m but not exceeding 0.11Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.

Material and labour for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.

Material and labour for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m as in skerting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing with 10 mm thick in CM 1:4 complete all as specified and as directed.

Material and labour of Glazed coloured and cereamic tiles in vertical surfaces 350x250x7mm 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces all as specified and directed

Material and labour Chequered cement concrete coloured tiles 20 cm x 20 cm x 25 mm thick using grey cement and no pigment set over & including 20 mm thick screed bed or bedding layer in cement mortar (1:6) with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles complete all as specified and directed.

Supply and fixing Vitrified ceramic tiles 10mm thick (Square/rectangular)polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 15 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes.

Material and labour for light shade Vitrified tile 10mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

Material and labour for glazed coloured designer ceramic tiles of size200X300x7mm or 300X450mmX7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engr-in-Charge.

Material and labour machine cut kota stone flooring 20-25mm thick over & including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified & directed.

Material and labour machine cut kota stone 20-25mm thick as in risers of steps, skirting, dado etc over & including 15mm thick rendering in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specdified.

Demolition of cement concrete in sunken portion any description and in any position not otherwise specifically provided

Material and labour 15mm thick CM(1:3) with WPC on walls as well as on sunken floor portion finished even and smooth using extra cement. Note:- WPC shall be measured and paid separately.

Material and labour PCC (1:5:10) type E-2 (using 40 mm graded aggrigate ) as in filling under sunken portion

Material and labour 30mm tick PCC(1:2:4)type B1 using 20 mm graded aggrigate as in floor finished even and rough to receive top layer complete all as specified

Taking down cement plaster inlcuding racking out joints, hacking for keys, scrubing down with water, complete all as specified and directed.

Material and labour 10 mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth with out using extra cement complete all as specified and directed.

Material and labour Rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or conrete surfaces, surfaces finished even and fair complete all as specified & directred.

Material and labour Rendering 5mm thick in cement mortar (1:3) on any face of brick walls or conrete surfaces, surfaces finished even and smooth without using extra cement, in ceiling, soffits of chajja or similar location etc complete all as specified & directred.

Material and labour 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement all as specified and directed.

Material and labour Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified.

Material and labourPreparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified.

Material and labour White wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified.

Material and labour for complete Removal of existing treatment of walls and apply two coats of white wash complete all as specified.

Material and labour for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling.

Supply and fixing galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

Supply and fixing galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

Supply and fixing galvanised steel water tubes 25 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

Supply and fixing Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified.

Supply and fixing PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified.

Supply and fixing 15mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) fixed in repairs complete all as specified.

Supply and fixing in repair 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass as in repair complete all as specified.

Supply and fixing in repair PVC connection both end brass union and length 450 mm long for 15 mm bore pipe.

Supply and fixing in repair Bib tap of CP brass, 15mm bore, fancy type screwed down, screwed for iron pipe or for brass ferrule complete all as specified. .

Supply and fixing in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, as in repair complete all as specified.

Supply and fixing in repair Rotational moulded triple layer Polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and as directed.

Supply and fixing 15mm bore dia Stop valve of PTMT with long shank and cup(Concealed type) (minimum weight 15mm-110Gm-20mm-112 gm any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) as fixed in repairs all as specified.

Supply and fixing PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs. as fixed in repairs and all specified and directed.

Supply and fixing Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm complete all as specified and directed.

All as per item No 55 herein before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each.

Supply and fixing factory made Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

Material and labour Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats,bed blocks, coping etc including necessary form work complete all as specified.

Supply and fixing factory made 30mm thick second class hard wood plain framed panelled shutters (any number of panels ), with panels of timber flat on both sides (feather edge), or of veneered particle board medium density wood wood particle board with commericial face veneers ,size of member of shutters as specified in SSRpart-1section 8.24 suplied and fitted to chaukhat complete all as specified .

Supply and fixing factory made Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified. Make: Rajshri or equivalent as approved.

Supply and fixing Factory made box type steel window with side hung shutter including pintol hinges & 2 Nos 150 mm MS tower bolts on each shutter complete with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified

Supply and fixing Factory made box type steel window with side hung shutter including pintol hinges & 2 Nos 150 mm MS tower bolts on each shutter complete without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified , including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified

Supply and fixing Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified

Material and labour Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide zink primer on steel surfaces complete all as specified.

Material and labour Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Supply and fixing PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified.

Supply and fixing PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified.

Supply and fixing PTMT handle 125mm long fixed with steel screws complete all as specified.

Supply and fixing mild steel pressed handle ,oval type ,125 mm stoved enameled black and fixed with steel screw complete all as specified

Supply and fixing MS barrel tower bolts stone enamelled black with bright bolt,200mm length of bolt.

S & F 300mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified.

Supply and fixing butt hinges 100mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type B21 Specified and directed.

Supply and fixing 150mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

Supply and fixing 125mm size,extruded aluminium alloy handles,fabricated type,anodized and fixed with screws complete all as specified.

Supply and fixing 250mm Aluminum alloy,anodised,sliding door bolt with hasp,staple(bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

Supply and fixing 150mm Floor door stopper of aluminium alloy body and tongue,anodized with hard drawn steel spring complete all as specified and as directed.

Supply and fixing PVC (SWR) 110 mm pipes single socketed in any lengthwith rubber/ ring Joints fixed to wll complete all as specified

Supply and fixing PVC (SWR) 75 mm mm pipes single socketed in any lengthwith rubber/ ring Joints fixed to wll complete all as specified

Supply and fixing PVC (SWR) bends any Radius with 110 mm dia complete all as specified

Supply and fixing PVC (SWR) bends any Radius with 75 mm dia complete all as specified

Supply and fixing PVC (SWR) bends vent cowl 110mm dia complete all as specified

Supply and fixing PVC (SWR) bends vent cowl 75mm dia complete all as specified

Surface excavation in soft /loose soil not exceeding 30 cm deep and averaging 15 cm deep and getting out complete all as specified.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out complete all as specified.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and exc 1.5 metre but not exceeding 3 metre depth and not exc 10 Sqm on plan, for shafts, wells, cesspits, manholes, pier holes, etc and getting out,compete all as specified.

Earth work in excavation for all kind of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge .

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width ) including getting out and disposal of excavated earth lead upto 50 m and lift exc 1.5 metre but not exceeding 3 metre, as directed by Engineer-incharge .

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate ) as in foundation filling, sub base for floors etc complete all as specified.

Returning filling in including spreading levelling watering & ramming in layers n.exc 2.5 cm complete all as specified.

Removing excavated material not exceeding 50 mtr and deposited where directed a level n.exc 1.5mtrabove the starting point as in soil.

Use & waste of formwork to sides of concrete foundations,footings,bases or column,raft and raft beams,sides and soffits if any of foundations and plinth beams and similar work,vertical or batter etc rough finished surface of concrete complete all as specified and directed.

Use & waste of formwork to sides of pillars,posts,struts,piers,columns and stanchions ect fair finished surfaces of concrete complete all as specified and directed.

Material and labour RCC(1:1.5:3) type B1 20mm graded stone aggregate as in foundations including rafts,footings,foundations beams ,bases of column etc complete all as specified and directed.

Material and labour RCC(1:1.5:3) type B1 20mm graded stone aggregate as in columns,pillers,piers,posts and structs etc complete all as specified and directed.

Material and labour of TMT bars 10 mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia all as specified.

All as per item No 96 above but 5 mm dia and over upto and including 10 mm dia in stirrups spaces and binders

Material and labour 75mm thick Broken Bricks hard core of gauge n.exc 63 mm deposited spread and leveled in layers n.exc 15 cm thick watered and ramed to a true surface complete all as specified and directed.

Material and labour 25mm thick sand filling under floors or in foundations or in trenches for UG cables including watering and consolidation complete all as specified and directed.

Material and labour 60mm thick,M-35 Grade Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 complete all as specified and directed.

Material and labour except tiles machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over sand cushning including compaction of paver blocks using surface vibrator all as specified and directed. Note :- Sand cushioning shall be paid separately under relevant item 19

Material and labour fixing of Gypsum Board 6 to 7mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised snap grid frame 605X605 mm for false ceiling incl hanging arrangement complete all as specified and directed by Engineer in Charge.

Supply and fixing Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame complete all as specified and directed by Engineer in Charge .

Supply and fixing Plain sheet glass 3mm thick, ordinary quality and glazing, fixed with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

Supply and fixing 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm of wire cloth galvanised mild steel and fixed with tinned tacks or galvanized wire staples complete all as specified.

Supply and fixing Steel rolling shuttersof 1.25mm thicklaths gear operated type with bevel gear box and crank handle ®with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete all as specified and directed.

Supply and fixing Safety lever locks mild steel with 4 levers for rolling shutters

Supply and fixing Ball bearing for rolling shutters

Supply and fixing bottom plate/patty 3 mm thick 125mm height including side lock at both end for rolling shutter of any type and description, fixed in position complete all as directed by Engr-in-Charge.

Supply and fixing in repairs Framed work as in doors or gates of angles or other section with gusset plates rails braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides and hanging also fastening and fixing complete.

Supply and fixing heavy duty 40mm dia bushes for supporting steel gates at floor portion

Material and labour cement concrete 1:3:6 type C2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid & tested for 200 mm bore pipe complete all as specified.

Material and labour cement concrete 1:3:6 type C2 as in bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for 200 mm bore pipe complete all as specified.

Material and labour 200 mm dia reinforced concrete pipes,class NP2 laid and jointed complete with collars in trenches as specified

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for & forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished and reforming branching as required for 200 mm dia pipes complete all as specified.

Material and labour for cement concrete type B2 1:2:4 (40mm graded aggregate) in surface channels and drains complete all as specified.

Providing cement concrete 1:2:4 type B1 (20mm graded agg) in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, ier aps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces,E28 including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed by EIC

Material and labour RCC 1:2:4 type B1 using 20mm graded aggregate as in Precast cover slab , shelves and similar articles and setting in Cement mortar (1:6) complete with joints to match complete all as specified

Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified & directed.

Material and labour for 75 mm thick cement concrete type D-2, 1:4:8 (40 mm graded aggregate) as in sub base to interlocking paver blocks and all other similar works complete all as specified and directed.

Material and labour for cleaning of blockage IWCs / EWC, bathroom / kitchen by cleaning the nahani traps / gully traps and CI / PVC pipe line upto the 1st Manhole. All the mud / sludge / Kitchen waste / plants roots to be cut/ removed and getting out by washing the traps, CI waste pipe throughly by opening the cleaning eyes lids properly . The sludge/ waste received during cleaning process to be removed at a distance not exceeding 100m from the bldg and Bleaching powder to be spread over waste and burred under the Soil / Earth . Earth work shall be included in the unit rate.

Cleaning and desludging / de-watering of septic tanks /Manholes and soakage well of any depth by using honey sucker followed by mechanical roding followed by hydraulic jet pressure machine etc as required,with the entire satisfaction of Engr -in- charge and re-fixing the manholes cover to its original position complete all as specified and directed.

Taking up HDPE/PVC watermains of 150 mm dia (including all fittings), complete all as specified and directed. Note :- Excavation shall be measured and paid saperatly

Taking up cast iron watermains (including all fittings),with spigot and socket ends and lead joints including burning out joints and recovering lead 150 mm dia complete Note :- Excavation shall be measured and paid saperatly

Taking up GI watermains 80 mm dia complete all as specified and directed complete with all fittings, sockets and flenged. Note :- Excavation shall be measured and paid saperatly

Taking up steel tubing including all fitings and fixtures for 40 mm to 50 mm dia complete all as specified and directed. Note :- Excavation shall be measured and paid saperatly

Taking up steel tubing including all fittings and fixtures for 25 mm dia complete all as specified and directed. Note :- Excavation shall be measured and paid saperatly

Taking up steel tubing with all fittings/ connections for 20 mm dia complete all as specified and directed.

Taking up Old us sluice valves and NRV of dia 150, 100, 80 mm

Taking up Old us gate valves of dia 40 to 50 mm.

Taking up Old us gate valves of dia 25 mm

Taking up Old us gate valves of dia 20 mm

Supply and fixing Centrifugally cast (spun) ductile iron pressure pipes with spigot & socket end, 150 mm dia class K-7 conforming to IS: 8329/2000 complete suitable for (push-on) rubber gasket jointing with centrifugally applied inside cement mortar lining with portland slag cement as per IS: 455:1989 and external metallic zinc coating as per annex A of IS 8329 with finishing layer of bitumen coating as per Annex C of IS: 8329. The standard lengths of the pipes are 5.50 meter (subject to tolerance as per clause 15.5.1 of IS: 8329:2000). Pursuant to clause 15.5.1 of IS8329, 10% of pipes in each size, may be supplied in shorter lengths, complete all as specified.

Supply and lay pipe galvanized, “Medium class”, 80 mm (3”) dia with all fittings and laid in floors/trenches including cutting and making good complete all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, 50 mm (2”) dia with all fittings and laid in floors/trenches including cutting and making good complete all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, 40 mm (1.5”) dia with all fittings and laid in floors/trenches including cutting and making good complete all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, 25 mm (1”) dia with all fittings and laid in floors/trenches including cutting and making good complete all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, 20 mm (3/4”) dia with all fittings and laid in floors/trenches including cutting and making good complete all as specified and directed.

Supply and fix Valves, Sluice, flanged of class 1.6 PN, 150M dia (6") complete all as specified and directed.

Supply and fix Valves, Sluice, flanged of class 1.6 PN, 80M dia (3") complete all as specified and directed.

Supply and fixing Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 50 mm dia and fixed complete all as specified and directed by Engineer-in-charge.

Supply and fixing Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 40 mm dia and fixed complete all as specified and directed by Engineer-in-charge.

Supply and fixing Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 25 mm dia and fixed complete all as specified and directed by Engineer-in-charge.

Supply and fixing Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 20 mm dia and fixed complete all as specified and directed by Engineer-in-charge.

Material and labour fittings for flanged pipes,bends(any type radius and angle) Tapers any type(straight bend increasing,decreasing or double socket etc) Tee pieces single branch junction double branch cross(all sockets or sockets & spigot. Collars,caps and plugs etc suitable upto 150 MM bore pipe complete all as specified and directed.

Material and labour for cutting existing road straight by manual, depth and width not less than 45cm for pipes upto 150 mm dia & filling back with excavated soil upto 75% road portion & 25% shall be made with cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate complete all as specified and directed

Material and labour for Valve pit of size 125x125x125 Cm in brick masonry for sluice valves constructed completely with 3.15 MM thick MS sheet cover, angle iron frame and locking arrangement including earth work, PCC, plastering and painting etc. suitable for 150 to 200 mm dia valves complete all as specified

Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls , floors, etc.

Material and labour Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including rigid non-metallic PVC conealed conduit, /surface conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

(b) One socket outlet on the same board controlled by one single pole one way switch

(c) One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

All as per Item No 149 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

Supply and fixing Switch piano flush type 6 amps, one way complete all as specified and directed.

Supply and fixing Switch piano flush type 16 amps, one way complete all as specified and directed.

Supply and fixing Socket outlet 5 pin, 6 Amps, piano flush type complete all as specified and directed.

Supply and fixing Socket outlet, 2 in one 6 pin 5 and 16 Amps piano flush type complete all as specified and directed.

Supply and fixing Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminals complete all as specified and directed.

Supply and fixing bell push flush type 5 Amps complete all as specified and directed.

Supply and fixing in repairs Lamp holder / Batten holder PVC/Polycarbonate type with back plate suitable for pandent/batten fitting complete all as specified and directed.

Supply & fixing Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb omplete all as specified and directed.

Supply & fixing bell ding dong type AC 230 Volt single pole.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified.

Supply and fixing LED tube light fitting 1 X 20 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed. Cat Part No. TRP-400-35-57-SL-LM-NSR of Crompton or equivalent of Bajaj/Havells/Philips

Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified

Supply and fixing in repair sheet metal enclouser DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.

All as per Item No 167 above but SPN DB's 4 way.

Supply & Fix in repair sub main wiring of 6 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 6.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia all as specified and directed. Note:-Two run of single core 6 sqmm cable and one run single core 6.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).

Supply and fixing LED tube light fitting 1 X 20 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No LHEXBLP7PN1W020 Make - Havells or equivalent to Crompton/Bajaj/Philips

Supply and fixing MCB single pole neutral (SPN) 240 volts, 20 to 40 Amps, 10 KA complete all as specified.

Supply and fixing MCB single pole (SP) 240 volts, 6 to 32 Amps, 10 KA complete all as specified. 'B' Series

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Cat No.LCTLRN-36-FO-CDL of Crompton

Material and labour Bricks (Size 23x11.5x7.5 cm) common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise acrose the line of cable in trenches for protection of UG cable complete all as specified and direced by Engr-in-Charge.

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)

Harmesh Kumar Sharma and Sons

KAILASH CONSTRUCTION COMPANY

JAWAHAR CONSTRUCTION COMPANY

V V AND COMPANY

CHETAK CONSTRUCTION COMPANY

M/s Surjit Singh and bros

Brar Enterprises