Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance 6 VISHNU SHREYA COMPLEX PLOT NO 87 87 A SECTOR 50 E OFF PALM BEACH ROAD SEAWOODS NERUL WEST NAVI MUMBAI 400706 | THANE | MAHARASHTRA | 400706 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
Tender Value
₹13.5 L
EMD Value
₹26,949
Closing Date
12 Oct 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DIRECTOR TMC
Office of Engineering services, Second Floor,Khanolkar Shodhika , ACTREC Kharghar Node, Navi Mumbai - 410210
Construction of museum in Faculty club building at ACTREC
2022_TMC_713197_1
Construction of Museum
Open Tender
Construction Works
Item Rate
120 days
ACTREC-Kharghar
As per Tender Document
2 documents required · 2 mandatory
₹0
₹26,949
Yes
ACTREC, KHARGHAR
9 Jan 2023
19 Sept 2022
13 Oct 2022
19 Sept 2022
12 Oct 2022
19 Sept 2022
19 Sept 2022 - 20 Sept 2022
26 Sept 2022
Amount
Civil Works
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand)
12-15 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) in fine sand
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material outside ACTREC campus as per direction of Engineer-in-charge.
Removing and refixing existing door with frame without damaging the doors and frames including refixing with new hinges as per the instruction of Engineer incharge.
Providing & Applying one / two coats of primer & thereafter two coats of paint as mentioned First quality to the required colour scheme and as per manufacturers instructions / specifications to the walls, beams, columns, ceilings, partitions doors etc. including thoroughly scrapping the existing surface with sand papers, removing old paint, filling up crevices and levelling with waterproof putty / plaster of paris of necessary to obtain smooth surface etc. complete job including removal of stains, painting spots on floors,aluminium window frame & glass etc as to the entire satisfaction of engineer in charge :With Luster Paint two coats of primer and two coats of paint. ( Rate inclusive of scafflolding, labour charges, ladder etc.) Colour scheme as shown in drawing including provision of grooves.
Providing and Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putty of average thickness of 2 mm of approved thickness, brand and manufacture, over the plastered wall surface to prepare the surface even and smooth ready for painting purpose etc complete ( Rate inclusive of Scaffolding Material, Labour Charges) Etc. Only to be applied at distressed areas and newly plastered surface as per the instruction of Engineer incharge.
Dismantling stone slab or tiled flooring and all material laid in cement mortar including stacking of serviceable material and disposal of unserviceable material outside the ACTREC campus as per the instruction of Engineer incharge.
Providing and laying Vitrified tiles in floor and walls in different sizes and patterns (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles any finish of size 600 to 1200mm in all specialised shades and design including technical body with digital printing.
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling of all types including electrical fixtures in false ceiling and disposal of unserviceable material outside the ACTREC campus and stacking of serviceable material as directed by Engineer-in-charge.
Providing and laying in position Plain cement concrete of specified grade excluding the cost of centering and shuttering: 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground outside the ACTREC campus as per the instruction of engineer incharge.
Supply and Fixing of window with wooden moulding of 8-12mm thick Toughened Glass with designer etching as approved by Architect using anodised alumnium section as per the details given in drawing (anodising of approved colour) with complete glass of maximum dimension 3m or as per drawing. The glass to be fixed using approved Profiles of aluminium at Top & Bottom & at sides (the profile to shared for approval). The profile size shall be as per the drawing to be fixed on to the floor/wall/ ceiling as per the architect design. H Junction profile to be used at all Glass to Glass vertical joints, 90 Deg L Junction Profiles and T Junction profiles necessary as per design. The profiles shall be suitable for Glass thickness of 12 mm.The Profile shall be 20 micron matt natural anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system. All Profiles to be with 2 mm Gauge thickness including 20 Micron of Anodizing of approved colour. All complete as per the instructions of Engineer incharge. Duco paint if required. for section.
Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, showpiece etc., in required design and pattern wherever required, stones of different finished surface texture and cutting with mechanical means (CNC Machine) for obtaining design as per the drawing , on 12-15 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. - 18 mm thick Marble stone slab as approved by Engineer incharge. The work includes making cutout in the wall and fixing marble including ahesive and fixtures all complete.Including window sill, borderlines and skirting with moulding work.
Supply and Fixing of 35 wooden door (Georgian style) with 8-12mm thick Toughened Glass with designer etching including providing and fixing top & bottom pivot & floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge. The glass shall be fitted with size and location as per the drawing. (Door handle size 600mm Center to Center, lock and stopper etc. included in the item rate). as approved by Architect using sleek anodised alumnium section (anodising of approved colour) with complete glass of maximum dimension 3m or as per drawing. The Fixed glass to be fixed using approved Profiles of aluminium at Top & Bottom & at sides (the profile to shared for approval). The profile of lipping and moulding shall be of suitable size for glass frame and wherever required as per the architect design. The door shall be completely PU/epoxy painted for seamless finish of approved colour. All complete as per the instructions of Engineer incharge.
Supply and fixing of customised Wooden bench of length 2m and width 0.6-0.8 m as per the design and drawing with seating strength of bench of 5-6 persons. Including all fixtures and support as per the instruction of engineer incharge.
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,
Shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to all/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,
including jointing and finishing to a flush finish and providing grooves with tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge with 12.5 mm thick tapered edge gypsum moisture resistant board and making provision for fixing of electrical fixtures.Work includes cutting and bending in curved shapes with cove and step design with all necessary cutouts.The ceiling is to be finished with a top coat as per approved manufacturer. The item also includes painting the ceiling with plastic emulsion paint in 2 or more coats after preparing the base. The false ceiling shall also be carried out at different elevation all as per the drawing and design approved by Engineer incharge and Architect. Different colour shades to be provided as per instruction and drawing.
Supply and installation of Customised photo frame with available photo of any durable material such wood with polish, fibreboard/paper foil with front protection of polystyrene or any other material with design as per the drawing and instruction of Engineer incharge.
Printing of high quality colour Photos for frame with canvass paper or any paper as approved by Engineer incharge and fixing it in frame with antiglaze- clear glass of 4mm all complete as per the instruction of engineer incharge.
Supply and fixing of rugs/carpet suitable to the outlook of room as per the design and drawing and instruction of Engineer incharge.
Ready made Console table with classical look as per the design and drawing given by architect/Engineer incharge.
Ready made Center table with classical look as per the design and drawing given by architect/Engineer incharge.
Ductable AC system as per the Annexure
All refrigerant piping shall be of copper, complete with supports between indoor & outdoor units duly insulated with 13mm Nitrile rubber insulation with GC cloth..[RMT indicated is for set of piping between indoor and outdoor machine, individual piping will not be measured] All Exposed piping should be laid in ladder type tray
1/4",1/2"" or as require
SITC Control cables between indoor and outdoor unit and to the main supply cables as per instructed and as directed by OIC-ES.All Exposed Cable should be laid in ladder type tray make:-Finolex/polycab
SITC PVC drain pipe having pressure holding of 6kg/cm2 Drain piping complete with all accessories with 6mm Nitrile Rubber Insulation.
Dia 20mm
Supply & fixing of Fire retardant synthetic canvass connection with a provision to measure the canvass temperature at the mouth of package units & prenum with all fixing arrangement, nut bolts, hardware’s etc. as per instruction of Engineer-in-charge.
GSS ducting with 9mm thick nitrile rubber insulation (Inside) Design, Supply, factory fabrication and installation of G.S.S. capsule/Oval ducting with required hardware’s, supports,painting on MS parts etc as per the requirement ,work to be carried out after approval of drawing, and instructions of Engineer-in-charge with the following gauges.
24 gauges
SITC of Extruded aluminium powder coated diffuser/ Grill without volume control damper with all necessary supports as per directed and as instructed by OIC-ES
SITC of Extruded aluminium powder coated diffuser/ Grill with volume control damper with all necessary supports as per directed and as instructed by OIC-ES
Electrical
SITC of 18 W LED fixture concealed / surface round / square as per site requirement and as directed by OIC - ES
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
1 or 2 Module (75mmX75mm)
3 Module (100mmX75mm)
6 Module (200mmX75mm)
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 A switch
15/16 A switch
6 pin 15/16 A socket outlet
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire including PVC conduicts , bends , and all fixing accessories
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire including PVC conduicts , bends , and all fixing accessories
Supply and fixing of LED NION Strip light as per colour decided by EIC ES
Supply and fixing of 5 to 8 w LED Spot light decorative type as directed by EIC ES
Supply and fixing of modern crystal chandelier light hanging ceiling mounted decorative type designed as approved by EIC ES
Shifting for existing fire alarm system control panel battery bank and required additional cabling , junction box and re connection / reinstallation of panel to new site. Additional cables , junction boxes in the scope of agency.
Removing and refixing of existing fire alarm devices , lights, switch scokets, access control systems , fans etc as directed by OIC - ES
RAJSHREE CONSTRUCTION CONSORTIUM
ADEEP CONSTRUCTION COMPANY PVT LTS
arcoma
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .