Repair/replacement of roof sheets roof sections water tanks kitchen plateform doors, sanitary fittings flooring and connected B/R works to certain Bldgs at 505 SU at AF Stn Mamaura.

Amount

M&L for rendering 15mm thick in CM 1:6 on any faces of brick or concrete surfaces and finish the surface fair and even including taking down cement plaster complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed..

Dismantling timber scantling framed works as in filletes, rails, posts, rafters, purlins etc under 40 sqcm in section complete all as specified and directed.

S&F for mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates of Fe 410-W (Gde-E-250) quality 'A' complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated steel sheeting any gauge/thickness in roof covering etc, complete all as specified and as directed.

M&L PCC 25mm thick 1:2:4 of type B0 using 12.5mm graded stone aggregate as in base of floors complete all as specified and as directed.

M&L for providing precast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in cover slabs , and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 including removal of existing damaged covers complete (reinforcement to be measured and paid separately) including demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

S&F (TMT bars) 10mm dia and over cut to length, bent to shape etc. including cranking and binding with M.S wire not less than 0.9mm dia all as specified and directed.

S&F non skid ceramic coloured tiles 7-8mm thick (square/ rectangular), area of each tile exc 0.18 Sqm but n exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

S&F non skid ceramic coloured tiles 7-8mm thick (square/ rectangular), area of each tile exc 0.18 Sqm but n exc 0.38 sqm, in vertical surfaces as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over &.incl 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

S&F pre polished marble flooring (Udaipur Green) 12-15mm thick machine cut, bedded, jointed with grey cement and pointed with white cement with pigment to match the shade of marble floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

S&F pre polished marble (Udaipur Green) on vertical surfaces as riser/dado/skirting 12-15mm thick machine cut, bedded, jointed with grey cement and pointed with white cement with pigment to match the shade of marble over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for Granite (of any type) 16 to 20mm thick machine cut laid over and including 15mm thick screed bed in CM 1:6 , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situation complete all as directed.

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection/path laid in alternate panels 75mm thick finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of primer on walls including preparation of new plastered surface complete all as specified and directed.

S&F 500 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of water tanks complete all as specified and directed.

S&F in repair Vitreous China wash hand basin white flat back size 550x400mm including brackets complete all as specified and directed.

S&F Chromium plated quarter turn Pillar tap 15 mm bore cast copper alloy with capstan heads chromium plated screwed down high pressure screwed in iron pipe complete all as specified and directed.Make:- Zim,Cat No-I-10-01 or Prayag,Viva,Cat No-7202 or Parryware,Amber,Cat No-G3402A1.

S & F 32 mm bore Low density polyethylene pipes for Wash hand basin etc complete all as specified and directed.

S&F 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms )complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern, white including pvc seat cover excluding flushing cistern and flush pipe complete all as specified and directed

S&F in repair PVC low level flushing cistern, white of capacity 10 litre ISI marked complete with inlet ball valve , and handle including bracket complete all as specified.

Taking down chowkats or frames exc. 1.5 but n.exc 4m2 each with shutters (W/o taking off shutters from the frame) and removal to store complete all as specified and directed.

S&F glass door of 12mm thick toughened glass of Make- Modi Guard/Saint Gobain including fixing with complete all as specified and as directed.

S&F floor spring single cylinder made of 2mm thick MS sheet box (230mmX100mmX48mm) and stainless steel cover plate (Gde 304) with and including top and bottom patch of stainless steel cover suitable for 10 to 12mm thick fully glass doors complete all as specified and as directed. Make :- OZONE Cat No. OFS-5800SD, OPF-2SD, OPF-3SD /CROSSLEY Cat No - CSH-2.

S&F glass door patch fitting (Top) of stainless steel with cover plate complete all as specified. Make :- OZONE Cat No. OPF-2 STD SSS or equivalent.

S&F glass door patch fitting (Bottom) of stainless steel with cover plate complete all as specified. Make :- OZONE Cat No. OPF-3 STD SSS.

S&F for stainless steel (Gde 304) glass door handle of 25mm dia and 450mm long H type handle (inside and outside both) fixing with screws all as specified and as directed. Make :- OZONE Cat No OGH-55 /CROSSLEY

S&F in repair 17/18mm thick medium density fibre board with one laminated face fixed with screw to timber frame work as in cup board shutter / shelves/cabinet fixed complete all as specified and directed.

M&L for decorative laminate of thickness 0.9mm type1 of surface finish, colour and pattern as approved, fixed with approved adhessive as per manufacturer's instructions complete all as specified and as directed

S & F continuous (piano) hinges mild steel bright finished or electro galvanised having 30mm width of flap when open complete all as specified and directed.

S&F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S&F in repair 25mm dia mild steel with PVC sheet coated of approved colour curtain rods for door/window curtain complete all as specified and as directed.

S&F mild steel powder coated brackets suitable for holding of 25mm dia curtain rods fixed complete with screws and PVC plugs complete all as specified and as directed.

S&F PVC decorative end knobs suitable for 25mm dia curtain rods of approved colour fixed complete all as specified and as directed.

M/S S J CONSTRUCTION

chandra kaushal supplier