Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹10.2 L
EMD Value
₹20,500
Closing Date
28 Oct 2026, 4:05 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Officer Apd II
Executive Officer AlipurduarII Panchyat Samity PO JASODANGA and Dist Alipurduar PIN 736208 West Bengal
Repairing work at Chepani High School under Mahakalguri GP within Alipurduar II Development Block
2026_ZPHD_5078241_1
nit7e
Open Tender
CIVIL WORKS
Percentage
Alipurduar II Panchyat Samity
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
₹20,500
7 Oct 2026
7 Oct 2026
30 Oct 2026
7 Oct 2026
28 Oct 2026
7 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying and laying true to line and level anti skid,homogeneous & granular finish virtified tiles in ground floor etc. In toilet floor | 2.96 | m2. | 906 | ₹2,677.23 |
| 2 | Wood work in door and window frame fitted and fixed in
position complete including a protective coat of painting at
the contact surface of the frame exluding cost of concrete,
Iron Butt Hinges and M.S clamps. (The quantum should be
correted upto three decimals)(d) Sal:Local | 1 | m3. | 71,907 | ₹71,763.19 |
| 3 | Panel shutters of door and window, as per design (each panel
consisting of single plank without joint), including fitting and
fixing the same in position but excluding the cost of hinge and
other fittings.
In ground floor.
(iii) 35 mm th shutter with 19 mm th panel.(b) Sishu,Gamer,Champ,Badam,Bhola,Morga,Hollok | 41.51 | m2. | 2,789 | ₹1,15,771.39 |
| 4 | Supplying, fitting and fixing M.S. clamps for door and
window frame made of flat bent bar, end bifurcated with
necessary screws etc. by cement concrete(1:2:4) as per
direction. (Cost of concrete will be paid separately)(a) 40mm x 6mm 250 mm long | 20 | nos | 29 | ₹580 |
| 5 | Iron butt hinges of approved quality fitted and fixed with steel
screws, with ISI mark.(viii) 100mm. X 50mm. X 1.25mm. | 60 | nos | 43 | ₹2,580 |
| 6 | Iron socket bolt of approved quality fitted and fixed complete.(b) 100mm x 10mm dia | 360 | nos | 40 | ₹14,400 |
| 7 | Iron socket bolt of approved quality fitted and fixed complete.(c) 150mm x 10mm dia | 360 | nos | 63 | ₹22,680 |
| 8 | Anodised aliminium D-type handle of approved quality
manufactured from extruded section conforming to I.S.
specification (I.S. 230/72) fitted and fixed complete:(ii) 100mm grip x 10 mm dia. | 1,065 | nos | 69 | ₹73,485 |
| 9 | Iron hasp bolt of approved quality fitted and fixed complete. 16mm dia rod (a)200mm long | 20 | nos | 134 | ₹2,680 |
| 10 | ) Priming one coat on timber or plastered surface with synthetic oil
bound primer of approved quality including smoothening surfaces by
sand papering etc | 360 | m2. | 38 | ₹13,680 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.02 MB
BOQ_5177789.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .