PROVN OF STORAGE ROOM FOR STORAGE OF FRESH AND DRY RATION AT MEAL DET AT KHALTSI UNDER GE KHUMBATHANG

Amount

Sch 'A' Part-I B/R work:- Surface dressing n.exc (not exceeding) 15 cm deep in hard / dence soil, complete all as specified and directed by Engr-in-Charge.

Excavation over area not exceeding 1.5 m depth and getting out in hard/ dense soil, complete all as specified. and directed by Engr-in-Charge

Excavation over area exc 1.50 m and not exceeding 3.00 m depth and getting out in hard/ dense soil, complete all as specified and directed by Engr-in-Charge

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of pipes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard / dense soil, complete all as specified and directed by Engr-in-Charge.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and directed by Engr-in-Charge.

Earth filling spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base, complete all as specified. and directed by Engr-in-Charge

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in hard/dense soil complete all as specified.

Removing surplus soil to a distance and not exc. 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed by Engr-in-Charge.

Cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete etc, complete all as specified and directed by Engr-in-Charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and directed by Engr-in-Charge.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and directed by Engr-in-Charge.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed by Engr-in-Charge, complete all as specified and directed by Engr-in-Charge.

RCC Design mix, M-30 ( using 20 mm graded crushed stone aggregate ) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed by Engr-in-Charge. (Note:-TMT bars will be masured and paid sepretly)

RCC Design mix, M-30 ( using 20 mm graded crushed stone aggregate ) as in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed by Engr-in-Charge. (Note:-TMT bars will be masured and paid sepretly)

RCC Design mix, M-30 ( using 20 mm graded crushed stone aggregate ) as in Columns, pillars, piers, posts and struts, complete all as specified and directed by Engr-in-Charge. (Note:-TMT bars will be masured and paid sepretly)

TMT bars 10 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.

TMT bars 6 to 8 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.

All as per item No. 17 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Precast cement concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge.

Rendering 10mm thick plaster on fair face of brick work or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

Rendering 15mm thick plaster on other than fair face of brick work in CM 1:4 and finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

Three coats of white wash on new plastered surfaces of wall including preparation of surfaces, complete all as specified and directed by Engr-in-Charge.

Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed by Engr-in-Charge.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe 410 W (Gde-E-250) quality A, complete all as specified and directed by Engr-in-Charge.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.

75 mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate sub base of floor, complete all as specified and directed by Engr-in-Charge.

40 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in flooring, complete all as specified and directed by Engr-in-Charge.

Glass deviding strips, 3 mm thick and 38 mm width, complete all as specified and directed by Engr-in-Charge.

Hardcore of broken stone boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed by Engr-in-Charge.

75mm thick cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate in plinth protection including provision of necessary form work finishing the exposed surface even and smooth, complete all as specified and directed by Engr-in-Charge.

2nd Class Hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engr-in-Charge.

2nd class soft wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed by Engr-in-Charge.

2nd class soft wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. devided in squares in plain, chamfered or rounded. mittered and rebated with sash bars and providing in windows, ventilators and stiles and rails etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b).

Preparation of new wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

100mm long butt hinges, medium weight, cold rolled mild steel (fixing with screw or welded as required ), complete all as specified and as directed.

75mm long butt hinges, medium weight, cold rolled mild steel (fixing with screw or welded as required ), complete all as specified and as directed.

150mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.

200mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.

150mm long extruded aluminium alloy handles, cast type, anodised, complete all as specified and as directed.

200mm long extruded aluminium alloy handles, cast type, anodised, complete all as specified and as directed.

250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed.

5mm thick sheet glass, ordinary quality and glazing with oil putty / beads in squares n exc 0.5 sq. m in each pane fixed, complete all as specified and as directed.

Anodised aluminium snap grid frame work for false ceiling size of grid 605 x 605mm, complete all as specified and as directed.

Providing and fixing Gypsum Board 12mm thick in ceiling / walling etc fixed with screw as per manufacturers instructions, complete all as specified and directed by Engr-in-Charge ..

Preparation of new surfaces of steel of any description , over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.

Sch 'A' Part-II E/M & W/S work:- Point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated FRLS type, 1.5 sqmm copper conductor cable unsheathed as earth continuity cable including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet top cover for one light /fan/bell point/buzzer point exhaust fan controlled by one nos, one way 5/6 Amps switch, complete all as specified and directed by Engr-in-Charge.

Point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated FRLS type, 1.5 sqmm copper conductor cable unsheathed as earth continuity cable including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet top cover for one socket outlet 5 Amp on independent board, complete all as specified and directed by Engr-in-Charge.

Point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated FRLS type, 1.5 sqmm copper conductor cable unsheathed as earth continuity cable including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet top cover for one socket outlet 5 Amp on the same board with other switches, complete all as specified and directed by Engr-in-Charge.

All as per srl item No 47 here-in-before but with conductor of size 4 sqmm (Nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm PVC insulated stranded copper conductor Cable, complete all as specified and directed by Engr-in-Charge.

Switch piano, flush type single pole, one way 5 Amp, complete all as specified and directed by Engr-in-Charge.

Switch piano, flush type single pole, one way 15 Amp, complete all as specified and directed by Engr-in-Charge.

Socket out let, multipurpose flush type 2 in 1, 3 pin, 5 Amp and 2 pin 5 Amp, complete all as specified and directed by Engr-in-Charge.

Socket out let, multipurpose flush type 2 in 1, 3 pin, 5 and 15 Amp, complete all as specified and directed by Engr-in-Charge.

Lamp holder, PVC / Polycarbonate type with 9 watt LED bulb back plate suitable for batten fittings(angle/plain), complete all as specified and directed by Engr-in-Charge.

MCB SPN 32 Amp 240 volt AC with 10KA breaking capacity of 'C' series in distribution boards, complete all as specified and directed by Engr-in-Charge.

Pressed sheet metal enclosure double door SPN distribution board, 8 way suitable for MCB's fitted with bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz, complete all as specified and directed by Engr-in-Charge.

MCB SP 6-40 Amp 240 volt AC with 10KA breaking capacity of 'C' series in distribution boards, complete all as specified and directed by Engr-in-Charge.

LED light fitting 1x20 watt for decorative AC box type LED Lightening fixture with extrued polycarbonate, environmental prewired and making connection with 3 core PVC connector to light fittings, complete all as specified and directed by Engr-in-Charge. Make Havells cat part No LHEXBLP71NW009 or equivalent make as specified in list of Makes.

1100 volts grade heavy duty 10 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, complete all as specified and directed by Engr-in-Charge.

Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6.3) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earth strip of size 32mmX6mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, strip protected by dia 40 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggregate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result complete including taking out of existing earthing complete all as specified and directed by Engr-in-Charge.

Street light fitting service bracket complete with 1.2m long G.I pipe 25 mm dia med grade, 45 degree bending making fixing arrangements with angle iron clamp as per the steel tublar pole dia, incl nuts bolts, washer and painting with one coat of red oxide and one coat of silver paints, complete all as specified and directed by Engr-in-Charge.

High power LED street light 35/36 Watt for building light IP 66 Energy saving and environmental friendly long life versatile pressure die-cast aluminium IP 65 roadway luminire with high power LEDs as light source and electronic driver incl suitable size service bracket fixed with lamps, nut, bolt and washer and electric connection with 1.5 Sqmm multistranded twin core alum cable PVC isulated, complete all as specified and directed by Engr-in-Charge.

Exhaust fan made of sturdy engineering plastic complete with louvre shutter. 230 volt 50HZ. RPM 1200. copper winding of 300 mm, complete all as specified and directed.

JK Technical Services

SONAM ANGCHOK