Construction of Arial Ropeway with all Facilities at Nimgaon Khandoba Temple Tal Khed, Dist Pune (Including Electrical work) (Including Electrical work)

Amount

Excavation for roadway in hard murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting etc. complete.

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate (Natural Sand/ VSI grade finely washed Crushed Sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 milimetre, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor/ by suitable means as approved by Engineer-in-charge, compacting with vibratory roller, finishing and curing including preparation of sub-grade surface if required etc. complete.

Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80 milimetre thick in M-40 grade of approved size and shape for city streets, small /medium market roads,low volume roads, utility cuts on arterial roads etc. as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand /crushed sand of 50 milimetre thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete.

Providing and casting in situ or precast tapering Reinforced Cement Concrete Mix-20 Barrier type Kerb with gutter (as per IRC:86-1983) embedded 125 milimetre below ground level over Mix-10 Plain Cement Concrete finished neatly with Cement Mortar 1:2, setting the same in Cement Mortar 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant.

Providing and fixing kerbstone with LED lighting system as per following specifications: dimensions with vertical mounting legs with 10 mm horizontal square shape mild steel reinforcements. Illuminated kerb stone having visible dimensions of 500 mm x 150 mm x 150 mm.(as per IRC 86:1983 ) 80 mm legs having mild steel reinforcements shal be embedded in black topped/concrete road surface.The kerb stone should have kerb angle of 45 degree, with rubber plugs at both ends of the kerbstones (2 nos.) having load carrying capacity of vertical- 1465 kg, horizontal- 2349 (certified by Govt. Recoganized bodies) having thermal stability -40 to +120 degree celcius (certified by Govt. Recoganized bodies. Illuminated kerb stones including : ingrace protection and connector rating IP 67, electrical wire -(as per IS: 694), LED strip (as per lm:80) standard. Including for electrical fixing -frp junction box consisting of - 10 amp. Switch module power supply (smps) having input voltage - 230v AC, output voltage 36 v DCc, 2 pole MCB. Illuminated kerb stones having warranty for 3 years. illuminated kerbstone shall be fixed into cast-in-situ cement concrete of M-20 grade at base, back filling and grooves, including dismantling, fixing, removal of dismantled material and cleaning etc. Complete. The colour of kerb stone shall be provided as directed by engineer in charge.

Supplying and installation of Road Delineators (Roadway Indicators, Hazard markers, Object markers) 80 to 100 centimetre high above ground level, painted black and white in 15 centimetre wide strips, fitted with 80 x100 milimetre rectangular or 75 milimetre diameter circular reflectorised panels at the top, buried or pressed into the ground and conforming to Indian Road Congress 79 and the drawings complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift upto 1.5 metre) by Mechanical Means..

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift from 1.5 metre to 3.0 metre) by Manual Means.

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift from 1.5 metre) by Manual Means.

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 meters beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/ murum, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift from 1.5 metre to 3.0 metre) by Mechanical Means.

Conveying materials obtained from road cutting including all lifts, laying in layers of 20 centimetre to 30 centimetre breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of over 50 metre to 300 metre inclusive from the site of excavation to the site of deposition as directed.

Providing soling using 80 milimetre size trap metal in 15 centimetre layer including filling voids with crushed sand/ grit, ramming, watering etc. complete.

Providing and laying in situ/ ready mix Mix-20 plain cement concrete of trap/ granite/ quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of "V" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/ steel formwork centering, (excluding dewatering by means of pump) and including bailling out water and curing finishing in cement mortar 1:3 etc. complete, as directed by engineer in charge, for height upto 5 metre, with Concrete Mixer, with with fine agreegates of required specifications (VSI sand finely washed etc.) The basic rate shall be increased for height above 5.00 metre in following manners (A) Depth upto 10 metre percent extra for rate, (B) Depth upto 15 metre Add 40 percent extra for rate, C) Depth upto 20 metre Add 60 percent extra for rate, (D) Depth upto 20 metre Add 100 percent extra for rate.

Providing and laying in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions etc. including bailing out water, formwork, laying/ pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided, (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).

Providing and laying cast in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade).

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade).

Providing second class Burnt Brick masonry with conventional /Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls /in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering complete.

Providing first class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in plinth including bailing out water manually, striking joints on unexposed faces, pointing with cement mortar 1:3 on exposed face and watering complete.

Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete.

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar1:3 admixed with approved water proofing compound and finally top finishing with average 20 milimetre thick layers of same mortar added with jute fiber at 1 kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 milimetre x 300 milimetre making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Providing internal cement plaster 6 milimetre thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).

Providing internal cement plaster 20 milimetre thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete.

Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of Reinforce Cement Concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/ Burnt Brick Masonry and or tying by binding wire etc. complete.

Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 milimetre thick in cement mortar 1:4 and rough cast treatment 12 milimetre thick in proportion 1:1.5:3 including scaffolding and fourteen days curing complete.

Providing and applying plaster with plaster of paris in 6 milimetre thickness to previously plastered surface in all position including preparing the surface scaffolding etc. complete.

Providing and applying Texture plaster with finishing with Purlina/ Rustic texture material (with texture material of Asian/ Renava/ Nitco/Temtex or equivalent company make) in 3 to 4 millimeter thickness on previously finished plastered surface, including Plaster Groove 6 milimetre thickness or Tape Grooves 35 to 45 milimetre thickness or as required, in all position including preparing the surface scaffolding etc.complete.

Providing, cutting, bending, hooking, tying and laying in position Thermo Mechanically Treated FE 500 steel bars for reinforcement for all Reinforced Cement Concrete works as per detailed drawings etc. complete.

Dry wall cladding with clay tile; Designing, supplying and fixing of Clay tile of Wienerberger (Red Series or Grey Series) or Equivalent with suitable size and thickness not less than 20 mm as per manufacturer with approved colour and pattern with composition of finest powdered clay and colour mixtures. The clay tile shall be fixed on the suitable farming system by using continuous aluminium profiled section as per manufacturer with suitable size and spacing to withstand the structural design criteria specifled in the technical specification by using necessary HDG brackets, SS316 grade anchor bolts etc as per manufacturer specification. Cladding joints should be with open groove system. with prior approval of concerned Superitending Engineer.

Providing and laying vitrified matt fininsh tiles for flooring having size 590 milimetre to 605 milimetre of 8 to 10 milimetre thickness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.

Providing and fixing green marble of 18 to 20 milimetre thick for door frame/ dado/ window boxing etc. on Cement Mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix- 10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade).

Providing and laying cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade).

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade).

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).

Providing and fixing in position Thermo Mechanically Treated (TMT) FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing internal cement plaster 12 milimetre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength,thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 milimetre thick compacted bed of fine fine aggregate (natural sand/crushed sand VSI grade finely washed etc.), compacting and proper embedding/laying of inter locking paver blocks into the fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and complete as per manufacturer spsecifications & direction of Engineer-in-Charge. 60 milimetre thick CC paver block of M-35 grade concrete with approved colour and design & pattern.

Providing and laying cement concrete flooring 40 milimetre thick with Mix- 15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 centimetre x 30 centimetre or other size laid diagonally/ square etc finishing smooth (with extra cement) in any colour as directed and curing complete with Crushed sand.

Providing and laying vitrified mirror/ glossy finish tiles for Flooring of decorative type having size 590 milimetre to 605 milimetre x 590 milimetre to 605 milimetre of 8 to 10 milimetre thickness and confirming to Indian Standard 15622: 2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.

Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plastered surface including scaffolding preparing the surface applying acrylic wall putti etc. complete.

Providing and fixing frame with / without ventilator of size as specified with non teak wood for doors and windows including chamferring, rounding, rebating, iron holdfast size 300 milimetre x 40 milimetre x 5 milimetre with oil painting, complete.

Providing and fixing in position (as per 1868:1982) aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milimetre at weight 0.637 kilogram per running metre with window frame bottom track section 92 x 31.75 x 1.30 milimetre at weight 1.070 kilogram per running metre . Top and side track section 92 x 31.75 x 1.30 milimetre at weight 0.933 kilogram per running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre. Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 kilogram per running metre and handle and top section 40 x 18 x 1.25 milimetre at weight o.417 kilogram per running metre. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete with colour Anodising with box.

Providing and fixing 30 milimetre thick PVC FLUSH L DOOR SHUTTER consisting of panel of hollow PVC profile of 20 milimetre thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19 milimetre x 19 milimetre inserted inside the hollow section of stiles rails top and bottom rails and two 19 x 19 milimetre mild steel tubes inserted horizontally inside the hollow profile section using 4/5 milimetre sheet using screws hollow profile shall be lipped with 10 milimetre (5 milimetre x 2) thick x 20 milimetre width on stiles and rails using solvent cement. The inner panel shall be laminated with 5 milimetre thick termite proof waterproof plain/ prelam PVC sheet using solvent cement on the both sides of the panel including stainless steel fixtures and fastening etc. complete as per direction of Engineer incharge, manufacturers specification and drawing.

Filling in plinth and floors with approved excavated material in 15 centimetre to 20 centimetre layers including watering and compacting etc. complete.Spec. No. : Bd.A. 11/Page No. 262

Providing and fixing in position anodised (as per IS1868/1982) Aluminium fixed staggered (Z Type) Ventilator with Aluminium rectangular pipe 63 mm. x 38.10 milimetre x 1.33 milimetre at weight 0.650 kilogram per running metre, Aluminium angle of size 15 milimetre x 15 milimetre x 1 milimetre, aluminium channel of 9 milimetre sizes, stainless steel mosquito net of 304 Grade, 4 milimetre thick float glass as per detailed drawing and as directed by Engineer Incharge etc. complete.

Providing and fixing 10 centimeter Poly Venyl Chloride nahani trap with grating complete.

Providing and fixing on walls / ceiling / floor 15 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed complete.

Providing and fixing on walls / ceiling / floor 25 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed complete.

Providing and fixing High Density Polymer container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 1000 to 20000 liters.

Providing and fixing Oval Type Under Counter Wash Hand Basin of 16 inch x 22 inch size and of special colour shade having Telephonic Black / Colour Granite of 180 milimetre thick fixed on Black Kadappa Framework, including Chromium Plated coupling Bottle-Trap using CERA company or equivalent Oval Type Wash basin Model No. 3448 as per detailed drawing or as directed by Engineer-In-Charge etc. Complete.

Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall, 100 mm diameter G.I. plug bend inlet pipe all fittings, cutting and making good walls, floors etc. complete.

Providing and fixing 15 milimetre diameter screw down bib/ stop tap of brass including necessary socket union nut complete.

Providing and fixing 25 milimetre diameter screw down bib/ stop tap of brass including necessary socket union nut complete.

Providing and laying ceramic tiles having size 30 centimetre x 30 centimetre for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimetre x 30 centimetre and conforming to Indian Standard 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.

Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish.

Providing & Fixing of Main Table @ 1800Lx900Dx750HT - made up of 18+18mm Thick MDF top with PVC Membrane finish and waterfall edge profile. Aluminium Anodizied finish beeding of 4mm thich is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in PVC Membrane finish and rest in Prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and Data wiring. , MODESTY PANEL:- to be made of 18 mm thick Prelaminated particle board with PVC edge bandAccess Flap:- For Wire manager 1 Nos.

Providing and fixing Table of Size 1500 x 600 x 750 mm Top made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board,

Providing & arrangemnt of high back chair - tilt mechanism with multilocking, high density cushion on seat composite leather with metallic silver finish base and arms with P.U.castors gaslift for height adjustment.

Providing and fixing fibre glass reinforced polyster door shutter 30 milimetre thick as per IS 14856 (2000) (reaffirmed 2006 ) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, complete.

Providing and fixing 40 milimetre diameter and 1.5 milimetre thick Stainless steel hand railing in S.S. 304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe complete.

Providing and applying two coats of exterior white weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, prepairing the plaster surface, applying primer coat, scaffolding if necessary and watering the surface for two days complete.

Providing and fixing white glazed urinal of series with Pressmatic auto closing valve of having 32 milimetre diameter P.V.C. flush pipe with fitting and flushing of approved make and arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc.complete as directed by Engineer in charge.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.

Providing and laying in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions etc. including bailing out water, formwork, laying/ pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided, (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).

Providing and fixing in position (as per 1868:1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milimetre at weight 0.637 kilogram per running metre with window frame bottom track section 92 x 31.75 x 1.30 milimetre at weight 1.070 kilogram per running metre. Top and side track section 92 x 31.75 x 1.30 milimetre at weight 0.933 kilogram per running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre. Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 kilogram per running metre and handle and top section 40 x 18 x 1.25 milimetre at weight o.417 kilogram per running metre. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc. complete with colour Anodising without box.

Providing and laying vitrified mirror / glossy finish tiles for Skirting having size 590 milimetre to 605 milimetre x 590 milimetre to 605 milimetre of 8 to 10 milimetre thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.

Providing and preparing kitchen otta up to 75 cm width, made up from 30 milimetre thick and 75 centimetre high vertical support for kadppa at 1 metre center to center of 25 milimetre thick both side polished kadappa middle shelf and bottom of 20 milimetre thick one side polished kadappa with facia patti of 20 x 50 milimetre kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete.

Providing and fixing frame work of anodized aluminium sections for suspended false ceiling consisting of aluminium T 50 milimetre x 40 milimetre weighening 0.39 kilogram per metre at 60 centimetres center to center and fixed with (15 x 15 milimetre ) flangea weighing 0.119 kilogram per metre suspended on 6 milimetre diameter mild steel rod weighening 0.22 kilogram per metre fixed on wall and beams including rounding of the edges with aluminium T of 50 milimetre x 40 milimetre weighening 0.39 kilogram per metre including all labour complete

Providing and fixing false ceiling of 10 to 12 milimetre thick decorative boards of fibrous plaster of paris including scaffolding if necessary, all architercutral work like mouldings cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards complete. (excluding frame work,runners and mild steel suspenders)

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 metre) by Mechanical Means.

Providing cast in situ / ready mix Mix-20 grade cement concrete for head walls of Cross Drainage work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with Superwisery Control and Data Acquisition, with Natural / Vertical Shaft Impact (VSI) standard Artificial Sand.

Supply & Fixing of Rock / Stone Finished outdoor vitrified flooring Tiles 20 mm thick and required width wide in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning complete. with prior approval of concerned Superitending Engineer.

DOUBLE SWING WITH BELT ASSEMBLY (Proving and Fixing) Per NoRec. Age : - 4-14 yrs.The area :- 3.0 m x 2.5 mSafe play area :- 4 m x 3.5 mIn the double swing the leg support is made up of 40 NB GI pipesand top pipe is of 50 NB GI pipes with GI junction box with powdercoating. The swing seat is made up of 10 mm thick rubber belt.The belt seat is affixed on 6 mm rubber coated GI chain. The ballbearings are mounted inside a specially designed nylon clamp ofbrand like SKF, FAQ.. All pipes are ‘B’ class pipes The Foundationpipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.45m andpainting is done by attractive color spraying after proper surfacetreatment, Shot blasting and initial coat of yellow primer surface isapplied before top coat. The top coat is done using the best qualitybrand paint or duly powder coated of minimum 60 micronthickness. All open ends of pipe been closed by GI / HDPE caps foruser safety against entrapment etc all. Work done should be as perengineer incharge.

TODLER SWING (Proving and Fixing) Per NoRec. Age : - 3-8 yrs.The area :- 2.8m x 1.0mSafe play area :- 4.0m x 2.0mIn the toddler swing the center support is made up of 100 NB GIpipes. The horizontal bars are made up of 50 NB GI pipes. All GIpipes are powder coated. All pipes are ‘A’ class pipes, Between thetwo horizontal bars there is a heavy-duty metal clamp attached toit. The bucket seats of the toddler swing are made of rubber withanti skid. The ball bearings are mounted inside specially designednylon balls. The rubber seat is affixed on 6mm thk gi chain. Theseats are to be made with full care so that the child does not fallfrom it while swinging. The toddler swing is designed specificallyfor toddlers of age 3-8 years. All pipes are ‘B’ class pipes AllStructures are to be Powder Coated. All Work Done As Per GeneralRaw Material Sheet Added Below. Work done should be as perengineer incharge.

FOUR SEATER ARCH SWING (Proving and Fixing) Per NoRec. Age :- 4-14 yrs.The area :- 6.0 m x 1.5 mSafe play area :- 7 m x 3.5 mThe arched shaped side frame is made of 80 NB GI pipes and toppipe is made up of 50 NB GI pipes. All pipes are ‘A’ class pipes Theframe is powder coated to give an esthetic look. The four swingsare made up of 10 mm thick anti skid chequered reinforced rubbertop. The rubber belt seat is suspended on 6 mm rubber coated GIchain. The ball bearings are mounted inside a specially designednylon clamp. All pipes are ‘B’ class pipes All Structures are to be

MINI WAVE SLIDE (Proving and Fixing) Per NoRec. Age :- 3 - 8 yrs.The area :- 2.2 m x 0.6 mSafe play area :- 3.7 m x 2.1mHeight :- 0.9mIn the mini wave slide the center support is made up of 50 NBpipe. The slide portion is made in Fiberglass reinforced plastic. Thethickness of the mini slide is 4mm with proper reinforcement tosupport the module. The triangular steps of the slide are of 16SWG and ladder frame is made in 20 NB powder coated GI pipe.The landing support is made up of 25 NB GI pipes. The ladder isdesigned in such a way there won’t be entrapment of child’s footwhile playing. All the sharp edges and corners properly grinded togive smooth finish so that children are not hurt while playing thepure polyester powder coating done on the pipes extends the lifeof equipments. All pipes are ‘B’ class pipes All Structures are tobe Powder Coated. All Work Done As Per General Raw MaterialSheet Added Below. Work done should be as per engineerincharge.

ROTO WAVE SLIDE – 2.1 m (Proving and Fixing) Per NoAge Group :- 4 – 12 yrs.Product Area :- 5.5 m x 1.0 mSafe Play Area :- 6.5 m x 2.0 mMaterial Specification:The ROTO Wave Slide is made up of Low Linear Density PolyEthylene by Rotational molding process in one piece having shellthickness of 4-5 mm with UV stabilized. The slide is supported on acenter support of 80 NB GI pipe. The landing supports of the slideare supported by two 20 NB pipes. The slide ladder is made up of25 NB GI pipe & the ladder hand-railing is made up of 15 NB and20 NB pipes respectively. The triangular steps of the ladder aremade up of 16 SWG GI sheets. The ROTO wave slide platform ismade up of 14SWG GI sheet. The trade and riser of the ladder aredesigned in such a way it won’t entrap child’s foot while playing.All the sharp edges and corners are properly grinded to givesmooth finish so that children are not hurt while playing on it. Thisslide is designed as per ASTM & EN standards which are globallyaccepted standards. All pipes are ‘B’ class pipes All Structures areto be Powder Coated. All Work Done As Per General Raw MaterialSheet Added Below. Work done should be as per engineerincharge

TWINDLER GO ROUND (Proving and Fixing) Per NoRec. Age : - 5-12 yrs.The area : - 1.5 m dia.Safe play area : - 2.5 m dia.The platform of the Twindler Go Round consists of circular non-skidtype FRP/ROTO MOLDING (LLDPE/HDPE. It is provided withhandrails of 20 NB GI pipes with minimum thickness of 2 mm. Thebearing used in this item is of heavy duty bearing permanentlylubricated with water sealant. All pipes are ‘A’ class pipes. All pipesare ‘B’ class pipes All Structures are to be Powder Coated. AllWork Done As Per General Raw Material Sheet Added Below. Workdone should be as per engineer incharge.

ELEPHANT SEE-SAW (Proving and Fixing) Per NoRec. Age :- 3-10 yearsThe area :- 2.7mx 0.8mSafe play area :- 3.7m x 1.6m Rec.Age :- 3-10 yearsIn this FRP / ROTO MOLDING( LLDPE /HDPE see saw the leverframe & seating arrangement is made in one piece & is made up ofFibreglass reinforced plastics. The transparent cover seen on thetop has certain colorful balls for fun. In order to ensure propersafety there are remolded tyres. The main stand is made from 40NB GI pipes. The handle is made up of 15 nb pipes. All pipes are‘B’ class pipes The Foundation pipes are embedded in C.C. stockof size 0.45 x 0.45 x 0.45m and painting is done by attractive colorspraying after proper surface treatment, Shot blasting and initialcoat of yellow primer surface is applied before top coat. The topcoat is done using the best quality brand paint or duly powdercoated of minimum 60 micron thickness. All open ends of pipebeen closed by GI / HDPE caps for user safety against entrapmentetc all. Work done should be as per engineer incharge

SPRING RIDER BIKE (Providing and Fixing) Per Nodone using the best quality brand paint or duly powder coated ofminimum 60 micron thickness. All open ends of pipe been closedby GI / HDPE caps for user safety against entrapment etc all. Workdone should be as per engineer inchargeRec. Age : 3 – 6 yrs.The area : 1 m x 0.5 mSafe play area : 2 m x 1.5 mThe whale/pony or bike is made out from fiber reinforced plastic(FRP ) / ROTO MOLDING ( LLDPE /HDPE). The handles provided forgripping is made up of 15 NB GI pipes. The duck is made out ofLLDP/HDPE in rotational molding. The duck is mounted on a pair ofheavy-duty compression spring. Also a GI flat is provided forfootrest. The spring is mounted on 5mm thick plate. And the standfor support is made out of 40 NB pipe. All pipes are ‘B’ class pipesThe Foundation pipes are embedded in C.C. stock of size 0.45 x0.45 x 0.45m and painting is done by attractive color sprayingafter proper surface treatment, Shot blasting and initial coat ofyellow primer surface is applied before top coat. The top coat is

CRYSTAL MAZE (Proving and Fixing) Per NoRec. Age :- 5 - 12 yrs.The area : - 2.4 m x 2.4 mSafe play area :- 3.4 m x 3.4 mHeight :- 2.6 mThis globular structure of the crystal maze is made for sheer fun ofthe children and is fabricated out of CRC pipes of 19 OD. Thesepipes are assembled together using 4 mm thick MS plates of 155mm dia duly electroplated with powder coating and bent to suit theshape of the product. The whole structure is supported on 40 NBGI pipes. All pipes are ‘B’ class pipes The Foundation pipes areembedded in C.C. stock of size 0.45 x 0.45 x 0.45m and paintingis done by attractive color spraying after proper surface treatment,Shot blasting and initial coat of yellow primer surface is appliedbefore top coat. The top coat is done using the best quality brandpaint or duly powder coated of minimum 60 micron thickness. Allopen ends of pipe been closed by GI / HDPE caps for user safetyagainst entrapment etc all.Work done should be as per engineer incharge

FUNNEL SCRAMBLER (Proving and Fixing) Per NoRec. Age : - 4 - 12 yrs.The area :- 3.3 m x 2.4 mSafe play area :- 4.3 m x 3.4 mHeight :- 3 mThe scrambler consists of a funnel which is made from 25 NB GIpipes to form rings. The rings are supported with 20 NB GI pipes.Both of these pipes are fabricated together to form a funnel shape.It also has a ladder made from 40 NB GI pipes with steps madefrom 20 NB GI pipes. The leg support is made from 40 NB GIpipes. All pipes are ‘B’ class pipes The Foundation pipes areembedded in C.C. stock of size 0.45 x 0.45 x 0.45m and paintingis done by attractive color spraying after proper surface treatment,Shot blasting and initial coat of yellow primer surface is appliedbefore top coat. The top coat is done using the best quality brandpaint or duly powder coated of minimum 60 micron thickness. Allopen ends of pipe been closed by GI / HDPE caps for user safetyagainst entrapment etc all. Work done should be as per engineerincharge

HALF ROUND NET SCRAMBLER (Proving and Fixing) Per NoRec. Age :- 4-12 yearsThe area :- 3.3m x 1.7mSafe play area :- 4.5m x 3.0mHeight :- 2.1mThe product is made of horizontal 40 NB GI pipes, which are in asemi-circle shape. This pipes are bolted to vertical 80 NB GI pipesfor end supports, and for centre support, vertical 40 NB GI pipesare bolted. The climber providing good exercise is made up of 18mm diameter nylon rope attached by specially designed nylon ballclamp. The nylon rope is attached to the frame with the help of ‘U’hooks welded to the frame. All pipes are ‘B’ class pipes TheFoundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x0.45m and painting is done by attractive color spraying afterproper surface treatment, Shot blasting and initial coat of yellowprimer surface is applied before top coat. The top coat is doneusing the best quality brand paint or duly powder coated ofminimum 60 micron thickness. All open ends of pipe been closedby GI / HDPE caps for user safety against entrapment etc all.Work done should be as per engineer incharge.

BALANCING BRIDGE (Proving and Fixing) Per NoRec. Age :- 4 – 12 yrs.The area :- 6.9 m x 0.6 mSafe play area :- 7.9 m x 1.6 mHeight :- 2.5 mThis is an exciting item for children of age group from 5 to 12 yrs.Its main frame and the long spacers are made using 40 NB GIpipes. All pipes are ‘A’ class pipes, The bridge is made up of floatsof moulded high density polyethylene of 600 mm dia and is keptswinging on two ms wire ropes. The bridge is kept at a height of150 mm from the ground level. A rope of 18 mm thk is providedoverhead for the safety of children while balancing on it. The twosupport pipes are made from 40 NB GI pipes (04 nos). To hold thefloat there are gi clamps of 16 swg. All pipes are ‘B’ class pipesThe Foundation pipes are embedded in C.C. stock of size 0.45 x0.45 x 0.45m and painting is done by attractive color sprayingafter proper surface treatment, Shot blasting and initial coat ofyellow primer surface is applied before top coat. The top coat isdone using the best quality brand paint or duly powder coated ofminimum 60 micron thickness. All open ends of pipe been closedby GI / HDPE caps for user safety against entrapment etc all. Workdone should be as per engineer incharge

DUSTBIN – FISH (Proving and Fixing) General Information: Per NoHeight : - 800 mmDia : - 400 mmMaterial Specification:This fish is made in pure polyester Fiberglass Reinforced Plastic of2mm thk with MAT finish to give it a mirror image and it iscorrosion resistance. This attractive fish dustbin attracts childrentowards it because of its eyes, nose and mouth and legs. As thechildren have habit of throwing the trash on the road or in thepark, this encourages children to avoid littering, which creates anunhealthy and aesthetically unpleasant social environment. Thefish dustbin is its shape, size and the scales of its body and finslooks like a real fish and the trash can be put through inside themouth of the fish. Work done should be as per engineer incharge.

FROG BIN DUSTBIN (Proving and Fixing) Per NoHeight : - 850 mmDia : - 600 mmThis fish is made in pure polyester Fiberglass Reinforced Plastic of2mm thk with MAT finish to give it a mirror image and it iscorrosion resistance. This attractive frog shape attracts childrentowards it because of its eyes, hands, legs. As the children havehabit of throwing the trash on the road or in the park, thisencourages children to avoid littering, which creates an unhealthyand aesthetically unpleasant social environment. The trash is to beput through the mouth of the frog. Work done should be as perengineer incharge.

BIRD BIN DUSTBIN (Proving and Fixing) Per NoHEIGHT : - 2.25’DIA : - 1.25’This dustbin is made up from FRP sheet with a 3 mm to 4 mmthick sheet of diameter 1.25 feet and given a shape of a bird withattractive colour. Work done should be as per engineer incharge.

SHOULDER BUILDER Per NoProviding and fixing Shoulder Builder made from “B” Class G.I.pipe. The Center Pipe is of 100mm NB made from “C” Class G.I.pipe, and the bottom support of M.S. Round plate of 250 mmdiameter & 10mm thickness is welded at bottom. The handlemovement frame is of 25 NB & 20 NB made from “C” Class G.I.pipe. To Join the centre pipe & handle movement frameseamless pipe of 130mm dia & 3mm thickness is used. Thefoundation used for fixing consists of three equal items i.e. 100mmNB made from “C” class G.I. Pipe, M.S. Round Plate of 250 mmdia & 10mm thickness & 25 mm X 25mm X 3mm M.S. angle.Closing caps made from top quality FRP material which is of 2 mmthickness. The pins used are made up of 25 mm dia bright bar. Thebearing used are of “6201” & “6205” permanent lubricated sealedbearing of reputed make like SKF, FAG. The nut bolts used forassembly are made from S.S. material. The serclips used forassembly is of 25 mm diameter. The Poly Urethin plastic bush isused for handling. The foundation pipes are embedded in C.C.stock of size 0.45 x 0.45 x 0.3 m below ground level and paintingis done by attractive color spraying after proper surface treatment,Shot blasting and initial coat of yellow primer surface is appliedbefore top coat. The top coat is done using the best quality brandpaint or duly powder coated of minimum 60 micron thickness. Allopen ends of pipe been closed by GI / HDPE caps for usersafety against entrapment etc all. Rate inclusive of labour,material, taxes, transport, etc complete all. Work done should beas per engineer incharge

Horizontal Bar Per NoProviding & fixing Horizontal Bar of height 2.1 mtr. from G.L. withG.I. Pipes of ‘C’ Class quality. The frame of the Horizontal bar shallbe of 25 mm NB pipe. The vertical support pipe of 75 mm NB pipe.The total play area for the equipment shall be 3 m wide.Thefoundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x0.3 m below ground level and painting is done by attractive colorspraying after proper surface treatment, Shot blasting and initialcoat of yellow primer surface is applied before top coat. The topcoat is done using the best quality brand paint or duly powdercoated of minimum 60 micron thickness. All open ends of pipebeen closed by GI / HDPE caps for user safety againstentrapment etc all. Rate inclusive of labour, material, taxes,transport, etc complete all. Work done should be as per engineerincharge.

Parallal Bar Per NoProviding & fixing parallel Bar of height 1.3 mtr. From G.L. withG.I. Pipes of ‘C’ Class quality. The horozontal parallel bar shall beof 40 mm NB pipe and vertical supports of 75mm pipe. Thetotal play area for the equipment shall be 0.9 x 0.5 m. Thefoundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x0.3 mbelow ground level and painting is done by attractive colorspraying after proper surface treatment, Shot blasting and initialcoat of yellow primer surface is applied before top coat. The topcoat is done using the best quality brand paint or duly powdercoated of minimum 60 micron thickness. All open ends of pipebeen closed by GI / HDPE caps for user safety againstentrapment etc all. Rate inclusive of labour, material, taxes,transport, etc complete all. Work done should be as per engineerincharge

Back Extension Per NoProviding and fixing Back extension made from “B” class G.I. Pipe.The main frame of Ø90mm made from “C” Class G.I. pipe, and Theleg movement frame is of Ø40mm made from “C” Class G.I. pipe.The handle frame is of Ø32mm made from “C” Class G.I. pipe. Theseats is fitted on the frame is made up of high quality FRP materialof size 330 mm X 300 mm of thickness 3 mm & M.S. Plate ofthickness 5 mm and Size 250 mm X 200 mm is used to Support it.The foundation used for fixing is consists of 25 mm X 25mm M.S.angle of 3 mm thickness. The footrests is made fromAluminum casting material, its sizes are 130mm X 310mm X5mm. For the support Ø32mm made from “C” Class G.I. pipe. Thefoundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x0.3m below ground level and painting is done by attractive colorspraying after proper surface treatment, Shot blasting and initialcoat of yellow primer surface is applied before top coat. The topcoat is done using the best quality brand paint or duly powdercoated of minimum 60 micron thickness. All open ends of pipebeen closed by GI / HDPE caps for user safety against entrapmentetc all. Rate inclusive of labour, material, taxes, transport, etccomplete all. Work done should be as per engineer incharge.

Sit Up Board Per Nopainting is done by attractive color spraying after proper surfacetreatment, Shot blasting and initial coat of yellow primer surface isapplied before top coat. The top coat is done using the best qualitybrand paint or duly powder coated of minimum 60 micronthickness. All open ends of pipe been closed by GI / HDPE caps foruser safety against entrapment etc all. Rate inclusive of labour,material, taxes, transport, etc complete all. Work done should beas per engineer inchargeProviding and fixing Sit up Board made from “B” Class G.I. pipe.The main frame is of 25mm NB made from “C” Class G.I. pipe.Perforated sheet of 2mm thickness is welded on main frame. Theremaining frame of the sit up board is of 40mm & 50mm NB madefrom “C” class G.I. pipe. The foundation pipes are embedded inC.C. stock of size 0.45 x 0.45 x 0.3 m below ground level and

Arm & Paddle Bike Per Noquality FRP material with 2 mm thickness. The pins used are madeup of Ø 25mm bright bar. The bearings used are “6205zz”permanent lubricated sealed bearing of reputed make (SKF/FAG).High tensile steel with galvanized nut bolts are used for assembly.The serclips used for assembly are of Ø25 mm. The foundationpipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3m belowground level and painting is done by attractive color spraying afterproper surface treatment, Shot blasting and initial coat of yellowprimer surface is applied before top coat. The top coat is doneusing the best quality brand paint or duly powder coated ofminimum 60 micron thickness. All open ends of pipe been closedby GI / HDPE caps for user safety against entrapment etc all.Rate inclusive of labour, material, taxes, transport, etccomplete all. Work done should be as per engineer incharge.Providing and fixing Cycle made from “B” class G.I. Pipe. The mainframe of Ø40mm made from “C” Class G.I. pipe. For the support offoot pedal M.S. round plate of Ø250 mm & 10mm thickness isused. The handle frame is of Ø32mm made from “C” Class G.I.pipe. The seats is fitted on the frame is made up of high qualityFRP material of size 330 mm X 300 mm of thickness 3 mm & M.S.Plate of thickness 5 mm and Size 250 mm X 200 mm is used toSupport it. The foundation used for fixing is consists of 25 mm X25mm M.S. angle of 3 mm thickness. Closing Caps made from top.

Single Chest Press Per NoDIMENSIONS:- 9000mm (L) x 650mm (W) x 2150mm. (H).SAFEAREA :- 2.0 M X 1.7 M.Chestpress equipment madeup of“B”ClassG.I.pipe of differentNB.NB stands for Nominal Bore Sizes i.e. Internal Diameter ofpipe in millimeters. Make of G I Pipe will be of Tata, Jindal,Swastik, Zenith or Siddharth. The center pipe is of100NBmadeup of“B”Class G.I. pipe. The bottom weldedwith supportof M.S.round plate of Ø250mm &10mmthickness.The connecting pipes are made up from 25NB“B”class G.I.pipe. The handle frame is made up from 25NB& 32NB “B”class G.I.pipe. To build structure bushes are usedwhich are made from MS.seamless pipe of 60mm O.D. and5mm thickness as well as 60mm diameter solid bar bush isused.The foundation used for fixing is a structure and made from centerpipe of G.I. of 80 NB “B” class Welded with M.S. round plate ofØ250 mm&10mmthick. Main pipe supported with 25mm X 25mmM.S. angles of 2mm thickness and 20mm x 40mm MS squarepipes of 2mm thickness. Foundation cover Closing Cap ismadefrom HDPE / LLDPE Material.The seats and Back rests arefitted on the outer frames are made up of M.S. Sheet of size330mmX 300mm X 2mm thickness and deep drawn and pressed intools and dies to have uniform radius of 20 mm with no sharpedges.Closing Caps are made up of high quality HDPE /LLDPE material. Pins used of Diameter 25mm and 17mm aremade up from bright material. The bearings used are of “6205zz”& “6203zz” permanent lubricated sealed bearing of reputedbrand like SKF, FAG. High tensile steel with galvanized nuts& bolts are used for assembly. The cerclips used for lockingis made up of A24mm & A16mm. The foundation pipes areembedded in C.C. stock of size 0.45 x 0.45 x 0.3m below groundlevel and painting is done by attractive color spraying after propersurface treatment, Shot blasting and initial coat of yellow primersurface is applied before top coat. The top coat is done using thebest quality brand paint or duly powder coated of minimum 60micron thickness. All open ends of pipe been closed by GI / HDPEcaps for user safety against entrapment etc all. Rate inclusive oflabour, material, taxes, transport, etc complete all. Work doneshould be as per engineer incharge

Providing & fixing BENCH IN CEMENT MORTOR/CONCRETE WITH RmtWOODEN FINISHING ON ALL EXTERNAL SURFACE. Bench shouldhave min. 2.1m to max. length 2.4m with 0.45m wide seat &0.40m high back for resting. beach should have 2 to 3supports/Legs as per requirement from ground in 1:1.5:3 ratioConcrete with 4 bar 12mm as a main & distribution 8mm Tor steelat 150mm c/c. Rate includes proper cleaning of surface by sandpaper application of 1 coat of Apex exterior grade primer abovethat 2 coat of exterior grade Apex Paint as a base coat & 1 coat ofApex Paint for making wooden finish/grains & with 2 final coat ofApex clear polish including Cement, Sand, Aggregate, chemical,adhesive, chickenmesh, primer, paint, polish, paper, etc. allmaterial, labor, scaffolding, excavation, pcc, tor steel etc. allcomplete. Work done should be as per a approved sample & theinstructions of engineer incharge.

Accupressure Bed - Providing and fixing Natural Stone pebbles in Sq.m1:6 Cement mortar of natural sand of 50mm thick bed as requiredline,level, shape and size as instructed by Engineer incharge. Itemincluding color pigments, lead lift, curing, cutting, all material andlabour with wastage etc. complete all

Providing, Fixing, Testing & Commissioning of MP Rotor Multistream Rotor Pop Up Sprinkler with including all Accessories, allmaterial, labour , etc all.MP 800 SR Multi Stream Rotor Pop up Sprinkler with Adjustable Per Nofrom 360° nozzle of radius 3 mtr@ Recommonded operatingPressure 2.8 bar, Q-0.18m³/hr (½" BSP inlet)Make - Hunter/Toro/Rainbir

PVC flush valve 50 mm Per NoMake - Jain / Plasson / Kisan

Providing, Fixing, Testing & Commissioning Tubing with drippersand accessories including all labours, if any16 mm In-Line Drip Tubing of class-2 with in-built 4 LPH Pressure RmtCompensating (PC) emitters spaced @ 0.6 mtr.Make - Jain /Netafim / Finolex / Rain Bird

Providing, Fixing, Testing & Commissioning of Irrigation HDPEPipes with including all Accessories, all material, labour , etc all.

GARDEN SOIL : Supplying on site garden soil well sieved 90% to Cu.Mpass through I.S. sieve of 10 mm sixe free from stones rubbishlike dried grass mots and other such materials. The soil should befresh from qarry. The colour of the soil generally be red. The soilwill be measured b measuring box .(Farma) (Item includes Royaltycharges ., Transporting, loading unloading etc.) lead charges for 20k.m. is considered

FARM YARD MANURE : Supplying on site well decayed, well dried , Cu.Mwell powered, without clods and free from stones, dried grass andother rubbish material . The colour fo manure generally be black.The manure will be measured by measuring box. (Fanna)(Itemincludes Transporting , loading unloading etc.) lead charges for 20k.m. is considered

Preparing Instant Lawn Excavating the ground to a required depth Sq.mof 20 cms. Removing & conveying unwanted stuff to a requireddistance as directed. Filling fresh garden soil/silt & manure inexcavated area in 3:1 proportion to a height of 20cms. Mixinggarden soil and manure thoroughly, well, leveling, watering onprevious night. Planting required variety of lawn grass as directedand maintaining till well established by watering, weeding,clipping, rolling etc. complete (R.A.No.3

Preparing flower Bed:- Excavating the ground to a required depth Sq.mof 30 cms. Removing & conveying unwanted stuff to a requireddistance as directed. Filling fresh garden soi & manure inexcavated area in 3:1 proportion to a required height of 30 cms.Mixing garden soil and manure thoroughly, well, leveling, watering on previous night. Planting seedlings of required annuals 25 cms.apart Maintaining till well established by watering, weedings,Stirring replacing of casualties etc, Complete. (R.A. No. 6)

Preparing Canna Bed:- Excavating the ground to a required depth Sq.mof 30 cms. Removing rubbish & conveying unwanted stuff to arequired distance as directed. Filling fresh garden soil & manure inexcavated area in 2:1 proportion to a required height of 30 cms.Mixing garden soil and manure thoroughly well, leveling, wateringon previous night. Planting well, levelling, watering on previousnight. Planting well developed Canna rhizomes 40 cms apart.Maintaining till well established by watering, weedings, Stirringreplacing, casualatie etc. complete. (R.A. No. 7

Preparing Shrubbery:- Excavating the ground to a required depth Sq.mof 30 cms. Removing rubbish & conveying unwanted stuff to arequired distance as directed. Filling fresh garden soil & manure inexcavated area in3:1 proportion to a height of 30 cms. Mixinggarden soil and manure thoroughly well, leveling, watering onprevious night. Planting well, levelling, watering on previous night.Planting well developed shrubs plants, 0.50 mtr. height, 0.45 Mtrs,apart as dircted and maintaining till well established by watering,weedings, Stirring replacing, replacing casualatie etc. complete.(R.A. No. 8

Rose Plant:- Excavating pit with size 0.3 m × 0.3 m × 0.3 m Per NoRemoving rubbish & conveying unwanted stuff to a requireddistance as directed. Filling the pit with fresh garden soil &manure in in 3:1 proportion to a required height of 0.3 m. Mixingthe soil and manure thoroughly well, leveling, watering onprevious night. Planting 40 to 50 cms, height healthy plant ofrequired rose variety. Maintaining till well established by watering,weedings, Stirring, pruning, replacing, the casualaties etc.complete. (R.A. No. 9)

Mogra Plant/Creepers/Climbers:- Excavating the pit with size 0.3 Per Nom × 0.3 m × 0.3 m Removing & conveying unwanted stuff to arequired distance as directed. Filling the pit with approvedexcavated material up to a hight of 0.15 mtr. and remaining heightof 0.15 mtr. with fresh garden soil & manure in in 3:1 proportion.Mixing soil and manure thoroughly well, leveling, watering onprevious night. Planting one or two year old healthy plant as perspecifications. Maintaining till well established by watering,weedings, pruning, Stirring, replacing, casualaties etc. complete.

Planting large flowering/Shady trees:- (Minimum Height to 2 Mtr. Per No)Digging pit with size 0.9 m × 0.9 m × 0.9 m Removing &conveying unwanted stuff to a required distance as directed. Fillingthe pit with approved excavated material up to a hight of 0.30 m.and remaining height of 0.60 m. with fresh garden soil & manurein in 3:1 proportion. Mixing soil and manure thoroughly well,leveling, as directed, watering previous night. Planting two orthree year old,minimum 2.0 mtr. mtr. hight, healthy tree sapling asper specifications. Maintaining till well established by watering,weedings, Stirring of soil, staking, replacing of casualties etc.complete. (R.

Planting small and medium size ornamental/flowering plant:- Per NoDigging pit with size 0.6 m × 0.6 m × 0.6 m, Removing &conveying unwanted stuff to a required distance as directed. Fillingthe pit with fresh garden soil & Farm Yard Manure up to a heightof 0.60 m in 3:1 proportion. Mixing soil and manure thoroughlywell, leveling and watering previous night. Planting one or twoyear old healthy plant saplings as per specifications. Maintainingtill well established by watering, Stirring of soil and manure,replacing of casualties etc. complete. (R.A. No. 13

Preparing ground covers:- Excavating the ground to a required Sq.mdepth of 20 cms. removing & conveying unwanted stuff, rubbish tothe required distance as directed. Filling the Excavated area withfresh garden soil & F.Y. Mnure in 3:1 proportion to a height of 20cms. Mixing, leveling, watering the same on previous night.Planting suitable ground covers as directed in staggering patterndistance between tow rows 25 cms., watering & maintaining tillwell established.. (R.A. No. 14

Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32 milimetre size of of approved make including soil pipe, vent pipe up to outside face of wall, 100 milimetre diameter Galvanised Iron plug bend inlet pipe all fittings, cutting and making good walls, floors complete.

Providing and laying ceramic tiles having size 30 centimetre x 30 centimetre conforming I.S.15622/2006 (group D II-A) and 7 to 8 milimetre thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/ colour cement slurry cleaning curing etc. complete.

Providing detailed layout plan of area in scale 1:500 including carrying out contour survey and detailed Engineering plane table Survey with the help of 20 second Theodolite, area measurement of the plot and structures, trees, over head line and under ground service amenities within the area, with triangulation method and giving details of the structures, such as total area, type of building and distance from all corners, taking trial pit 0.5 x 0.5 x 2.00 m. – 2 Nos. per Acre and collection of record from city survey /D.I.L.R. authorities and authontification. The plan shall be traced on 75 micron polyster film and shall be submitted along with three Amonia Prints. The contour levels shall be marked at 0.5 Metre intervals. Note :- The item includes - 1] Traversing work with theodolite and steel tape.2] Levelling Grid work of the terrain.3] Detailed Engineering Survey and contouring work of the terrain.4] Plotting work.5] Collection of Record. Above 1 Acre

Construction of granular sub-base by providing close graded Material,spreading in uniform layers with Motor Grader/ Paver on prepared surface, mixing by mix in place method with rotavator at Optimum Moisture Content and compacting with vibratory roller to achieve the desired density complete as per clause 401. For Grading I Material.

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate (Natural Sand/ VSI grade finely washed Crushed Sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 milimetre, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor/ by suitable means as approved by Engineer-in-charge, compacting with vibratory roller, finishing and curing including preparation of sub-grade surface if required etc. complete.

Providing and fixing in position TMT FE-500, 25 milimetre diameter dowel bars precoated with anticorrosive epoxy paint of required diameter 60 centimetre Long and at 30.00 centimetre center to center and wherever directed including handling, straightening, necessary cutting supported by HYSD chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete.

Providing and laying in-situ M-30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (Natural Sand/ VSI grade finely washed Crushed Sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound/ by providing cement vata in cement Mortar 1:8 of 0.6 metre x 0.6 metre centre to centre, admeasuring 80 milimetre at bottom and 40 milimetre at top with depth of 75 milimetre and maintaining the same throughout curing period/ by any other method approved by Engineer-in-charge.

Cutting transverse contraction joints 3 to 4 milimetre wide and depth 60 milimetre in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay /slab etc. complete including subsequent widening of the groove 8 to 10 milimetre wide at top having depth of 15 milimetre as directed by Engineer incharge.

Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395:1997 below concrete pavement including all materials and labour complete.

Providing and errecting 1.5 metre high wire fencing with seven rows of barbed wire supported on Mild Steel Angles (50 milimetre x 50 milimetre x 6 milimetre) at 2.5 Metres, centre to centre including excavating pits for foundation, fixing post in cement concrete 1:4:8 of size 45 x 45 x 45 centimetre, fastening the wire and painting the Mild Steel Angles with one coat of red lead primer and two coats of painting complete.

Providing and casting in situ or precast tapering Reinforced Cement Concrete Mix-20 Barrier type Kerb without gutter (as per IRC:86-1983) embedded 125 milimetre below ground level over Mix-10 Plain Cement Concrete finished neatly with Cement Mortar 1:2, setting the same in Cement Mortar 1:2, including the required excavation in any strata and removing the excavated stuff anywhere in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant.

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 milimetre with lock plate of 3.15 milimetre thickness reinforced with 35 x 35 x 5 milimetre angle section fitted with sliding bolts and handles for both sides, deep Mild Steel channel section of depth and thickness not less than 65 milimetre and 3.15 milimetre respectively with hold fast arrangments, Mild Steel Bracket plate 300 x 300 x 3.15 milimetre minimum size and shape with square bar suspension shaft of minimum 32 milimetre diameter, hood cover of Mild Steel sheet not less than 0.9 milimetre thickness and of any size at top and safety devices including mechanical gear operation arrangementconsisting of worm gear whwwls and worms of high grade cast iron or mild steel and one coat of red lead primer complete. (I. S. 6248 - 1979) with mechanical gear.

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-20 of trap/ granite/ quartzite/ gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/ steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade).

Providing and laying vitrified rustic matt stone finish tiles for Flooring of having size 590 milimetre to 605 milimetre x 590 milimetre to 605 milimetre of 8 to 10 milimetre thickness and conforming to Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.

Providing and laying vitrified rustic matt stone finish tiles for skirting of having size 590 milimetre to 605 milimetre x 590 milimetre to 605 milimetre of 8 to 10 milimetre thickness and conforming to Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.

Providing and Fixing stainless steel kitchen trolley of overall 26 " height and 22" depth,supported on aluminium pipes ,trolley basket made out of 5 mm stainless steel rod fitted on telescopic channel of size 1.5 " x 20 " x 22 " on both sides of trolley of 12 " or above size, panel having 40 kg load bearing capacity of trolley made out of 20 mm PUC coated plywood and colour combination as directed by E-I-C.Inner side of panel covered by white mica ,100 mm s.s. decorative handle.(The width and height of individual compartments shall be kept as directed by Engineer-in-charge)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted /bolted / welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25 milimetre to 450 milimetre section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/welded connections and painting complete.

Supply and Installation of Dpi Flux translucent roof with standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 22 mm thick of 1200mm (min.) width with angular daylighting concept. Panels shall have minimum seven layers in a truss bridge design for higher flexibility & strength. Panels with opaque and translucent clear combination as per required lux level and design requirements with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall have an additional IR Blocking features for enhance thermal comfort. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with a continuous aluminium I Beam holding the base of the standing seam along the length of the panel & fixed with purlin with self-drilling hexhead screws offering best stability with a pull-out load of min. 21000N (21KN) tested as per

Providing and fixing in position (as per I.S.1868:1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 milimetre at weight 0.547 kilogram per running metre and window frame bottom track section 61.85 x 31.75 x 1.20 milimetre at weight 0.695 kilogram per running metre. Top and side track section 61.85 x 31.75 x 1.30 milimetre at weight 0.659 kilogram per running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre. Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 kilogram per running metre and handle section 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre and top section 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass with all required screws and nuts etc, complete with powder coating with box.

Providing and laying in situ /ready mix Mix-30 cement concrete of trap/ granite/ quartzite/ gneiss metal for cast in citu Reinforced Cement Concrete solid piers, column etc . including provision of V shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/ steel formwork, centering (excluding dewatering by means of pump) and including bailling out water and including cement mortar 1:3 curing complete, (VSI Sand finely washed), for height upto 5 metre (With Concrete Mixer).

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Pardi of required thickness including centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).

Providing and laying cast in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade).

Providing an emergency evacuation chair of the approved design, weight and loading capacity

Providing a folding wheelchair of Pioneer Surgicals Brand, model no. PS 809/ equivalent make as per the directions of the engineer in charge.

Providing and applying washable oil bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) complete.

Providing and erecting 'Y' type barbedd wire fencing with seven rows of wire with 2.45 milimetre diameter galvanised iron pipe (Rezan / concentina wire 0.75 milimetre diameter ) with hot dip and galvanised iron coated hooks as per drawing supported on mild steel angle 50 x 50 x 6 milimetre at 2.50 metre centre to centre including fixing and fastening with wire, painting mild steel angles with one coat of red lead primer and two coat of oil paint complete.

Providng and fixing stainless steel sink of size 600 x 510 x 200 millimeter of Nirali or equivalent make including coupling, outlet pipe, elbow and other necessary fitting, finishing complete.

Providing and laying in trenches 25 milimetre diameter medium grade having embossed as Indian Standard Institute Mark galvanised iron pipes of 2.49 kilogram per metre with necessary fitting, remaking good the demolished portion with filling trenches and with primer of anti-corrosive primer oil paint two coats complete.

Providing and fixing 50 milimetre diameter water meter with non return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [ without chamber ]

Providing and fixing screw down for 25 milimetre diameter wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing 15 centimetre x 10 centimetre salt glazed stoneware gully trap in cement concrete 1:4:8 out side the building including cast iron grating in the sink, connecting glazed stonewre pipe brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing and constructing Brick Masonry Inspection Chamber 60 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stone Ware pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with Reinforced Cement Concrete cover medium duty 140 kilogram with frame etc. complete.

Providing and constructing Brick Masonry Inspection Chamber 90 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stone Ware pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with Reinforced Cement Concrete cover medium duty 140 kilogram with frame etc. complete.

Providing soak pit of size 120 centimetre x 120 centimetre x 120 centimetre including excavating and filling with brick-bats.

Providing and fixing 100 milimetre diameter stabiliser pipe /Poly Venyl Chloride soil vent /waste pipe and with necessary fixtuers and fiting such as bends, tees, single junctions slotted vent, clamps complete.

Providing and laying in trenches 50 milimetre diameter heavy grade having embossed as Indian Standard Institute Mark galvanised iron pipes of 6.33 kilogrames per metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing in position various capacity Like 'RAINY' rainwater harvesting dual intensity auto flush open ended at drain outlet filter with working principal of COHESSIVE AND CENTRIFUGAL FORCE having filter element made out of S.S. 304 screen with mesh size of 205 microns having rainfall capacity of 75 m/hr intensity with operating pressure of 0.060Kilogramper sq.cm. of Head with discharge capacity ranging from 10 to 480 lit/min including all necessary accessories like coupler,bends,PVC valve,etc fixing with Bombay nails of required length etc. complete with inlet size of 90 mm to 110 mm diameter from rooftop pipe with drain outlet of 90 mm to 110 mm diameter size with clean water outlet of 62 mm to 90 mm diameter size including fitting and fixing excluding inlet and outlet piping etc complete as per the direction by engineer in charge.FL-100 for the catchment up to 110 sq.m. system size 90 mm diameter inlet, 63 mm diameter clean water outlet, 90 mm diameter drain outlet (filterain,tee,door bend, valve 63mm)

RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300 milimetre thick side filling around outside of RCC rings (annular space) with 40 milimetre size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75 milimetre clean washed gravels followed by 0.5m depth of 10-25 milimetre of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge

RWH - Recharge PitProviding and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300 milimetre thick sidefilling around outside of RCC rings (annular space) with 40 milimetre size boulders including filling of recharge pit up to 0.5m depth with 25-75 milimetre clean washed gravels from bottom up followed by 0.5m depth of 10-25 milimetre of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end-caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.

Providing and fixing screw down for 50 milimetre diameter wheeled stop tap of brass including necessary sockets / union nut complete.

122160-1 of 2023-2024 - Providing Internal Electrification for the various building in the premises of Nimgaon Kandoba Temple Tal. Khed Dist. Pune Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No WG-MA/CC

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No WG-MA/CC

Supplying and laying HMS PVC conduit FRLS grade 32mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No WG-MA/BW

Supplying and erecting green colour earthing with 1x 1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No WG-MA/BW

Supplying and erecting green colour earthing with 1x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No WG-MA/BW

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No WG-MA/BW

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type bell-push 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16 / 20 A with indicator duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type (two module) electronic step regulator for fan duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting 6 to 32 A 10kA SPMCB suitable to fix in 1 module of modular switch in provided box complete & duly concealed with necessary material and connected.

Point wiring for light/fan/bell in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and required accessories as per specification No WG-PW/SW

Point wiring for independent plug in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire flush type switch earthing and required accessories as per specification No WG-PW/SW

Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires modular type switch earthing and required accessories as per specification No WG-PW/CW

Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires modular type switch earthing and required accessories as per specification No WG-PW/CW

Secondary point wiring for additional light/ bell point concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No WG-PW/CW

Secondary point wiring for additional light/ bell point in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire with required accessories as per specification No WG-PW/SW

Wiring for plug on board with Switch socket surface/concealed type copper wiring and earthing and with modular accessories as per specification No WG-PW/CW

Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens min. efficacy of 100 lumen/W CRI>80 CCT upto 6000K Beam Angle of 1

Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens min. efficacy of 120 lumen/W CRI>80 CCT upto 6500K Beam Angle of 120 deg.

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and fixing anchor type fastener fan hook with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan.

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Supplying, erecting, testing and commissioning of self contained water cooler 230/250V 50Hz nominal cooling capacity of 80 litres per hour and storage capacity 120 litres with partially stainless steel body as per specification no. AP-WCR/WC22

Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire two indicator lamps dual function cartridge with output of purified water 1 litre/min wit

Supplying, erecting and marking SPMCB 6A to 32A C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking SPMCB 6A to 32A B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking DPMCB 6A to 32A C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking TPMCB 6A to 32A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking FPMCB 6A to 32A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking FPMCB 40A to 63A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting triple pole and neutral distribution board (TPNDB) SPMCB of 4 ways/phase (12 poles) with door 1.2mm thickness surface/flush mounted IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR

Supplying and erecting triple pole and neutral distribution board (TPNDB) SPMCB of 8 ways / phase (24 poles) with door 1.2mm thickness surface/ flush mounted IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR

Supplying and erecting triple pole and neutral distribution board (TPNDB) SP/TP MCBs total 4 ways /12 Poles with door 1.2mm thickness surface/flush mounted IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBD

Supplying and erecting triple pole and neutral distribution board (TPNDB) SP/TP MCBs total 8 ways /24 poles with door 1.2mm thickness surface/flush mounted IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBD

Supplying and erecting single pole and neutral distribution board (SPNDB) with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs with door 1.2mm thickness surface / flush mounted IP 43 Protection on iron / GI frame as per specification no

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

Supplying and erecting single pole and neutral distribution board (SPNDB) with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs with door 1.2mm thickness surface / flush mounted IP 43 Protection on iron / GI frame as per specification

Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars 500V 100A having 15mm (Width) X 3 mm (Thickness) with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A per sq. mm. compliance to IS 5082 and Encl

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 2 core 6 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per spe

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 6 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per sp

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per s

Supplying and laying (including excavation) of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface to required depth complete.

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials testing & recording the results as per specification no. EA-EP

Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

122160-2 of 2023-2024 - Providing water pumps for the various building in the premises of Nimgaon Kandoba Temple Tal. Khed Dist. Pune Supplying and erecting two pole metal clad changeover switch 240 V 32 A erected on angle iron/GI frame and duly connec

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials testing & recording the results as per specification no. EA-EP

Supplying and erecting Minimum three & above star rated Centrifugal water pump (Monoblock) 230V Single phase 50 cycles A.C. supply of 1.125 kW/1.5HP with discharge 198/50 Litres per Minute (LPM)) for head of 15/37.5 m & 40 mm suction/ 32 mm delivery p

Supplying and erecting Water level controller 230/415 V A.C. Four way under ground & Over head tank operation only.

Supplying and erecting PVC coated 5 mm dia. Brass sensor/ electrode duly wired with nuts & bolts complete (Set of 3 Nos)

Supplying and erecting automatic control panel for 1 Ph 230 volt A.C. Submersible/centrifugal pump set up to 3 HP consisting of DOL starter Of suitable relay range S.P.P. Combined ammeter/ voltmeter phase indicating lamp enclosed in CRCA powder coated

Supplying and erecting ISI mark GI pipe 32 mm dia.‘B’ class at position with accessories complete as per specification no. CW-PLB/GP.

Supplying and erecting ISI mark GI pipe 40 mm. dia. ‘B’ class at position with accessories complete as per specification no. CW-PLB/GP.

Supplying and erecting 40 mm. dia. gun metal sluice valve at position with necessary materials complete.

Supplying and erecting non return valve 40 mm dia in position made of gun metal complete.

Supplying and erecting CI flange 40 mm dia with necessary nuts bolts and washers with rubber seal in position complete.

122160-3 of 2023-2024 - Providing Street light for the newly constructed road in the premises of Nimgaon Kandoba Temple Tal. Khed Dist. Pune Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flex

Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing having system lumens output of Min. 7700 Lumens min. efficacy of 110 lumen/W CRI>70 CCT upto 6500K THD<10% p

Supplying and erecting integrated LED flood light fitting Max. 155W IP65 & IK07 class having pressure die-cast aluminium housing having system lumens output of Min. 18600 Lumens min. efficacy of 120 lumen/W CRI>70 CCT upto 6500K THD<10% p.f. >0.90

Supplying and erecting single phase 240V street light control panel up to the max load of 6kW SPN MCB 40A powder coated CRCA 14 SWG sheet outdoor type having IP54 IK10 protection suitable rating contactor 24 hrs. astronomical time switch with mini

Supplying, erecting and marking SPMCB 0.5A to 5A C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 4 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per sp

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per s

Supplying and laying (including excavation) of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface to required depth complete.

Supplying and erecting 12.5 m (clear height) motorized high-mast (Top -150mm Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron made from high tensile structure grade steel as per BSEN - 10025 S 355/E350 & 3mm thickne

Providing and erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 32A TPN MCB incomer 24hr astronomical time switch with minimum 5 years battery backup IP 54 and IK10 protection 25 A TP contactor for automatic switc

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials testing & recording the results as per specification no. EA-EP

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel concrete excavation and fixing provided nut bolts with the help of template duly pla

Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template duly plastered as per design complete (for 12.5 m rais

122160-4 of 2023-2024 - Providing solar water heater system for the bhakta niwas in the premises of Nimgaon Kandoba Temple Tal. Khed Dist. Pune Supplyin

Supplying and erecting 32/40 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC) thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC

Supplying and erecting 40/50 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC) thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC

Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating as per specification no. FF-VL/BFV

Supplying and erecting 75/80 mm dia cast iron double flange NRV complete with PN16 pressure rating as per specification no. FF-VL/NRV

Supplying and installing one piece moulded HDPE / fibre water tank for negative suction only having capacity 1000 litres fitted with necessary accessories complete as per specification no. FF-FFA/PT

122160-5 of 2023-2024 - Providing 100 KVA transformer for the Nimgaon Kandoba Temple premises Tal. Khed Dist. Pune Supplying and erecting triple pole mini feeder pillar with 500V 200A FPMCCB as incomer and 2 outgoing circuits with HRC fuse bas

Supplying and erecting triple pole mini feeder pillar with 500V 300A FPMCCB as incomer and 3 outgoing circuits with HRC fuse base and cartridge of 100A with aluminium bus bar erected in 14 SWG CRCA sheet box with supporting angles self locks gasket h

Supplying and erecting iron work sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding com

Supplying and erecting self-locking arrangement with keys in duplicate made of brass of grade 1 compliance to IS 729-1979 duly erected flush with surface of panel / cupboard

Supplying and erecting LT CT multifunction DLMS compliance energy meter of accuracy of class 0.5 3x240V 50 Hz with optical & RS 232 port backlit LCD measure & display trivector energy load survey TOD tamper detection & logging power ON /OFF events

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per s

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per

Supplying and erecting rolled steel joist (girder) pole 152 x 152 mm (37.1 kg/m) with base plate in provided foundation as per specification no. OH-PL/RSJ

Supplying and erecting pole bracket fabricated from ISM channel of size 75x40x6mm 1100mm long for necessary nos. of provided insulators and welded with extension channel pieces of same size 300 mm in length and erecting on pole with 50x6mm clamp complete

Supplying and erecting 100 x 50 x 6 mm with 4.7 mm thick web and 7.5 mm thick flange channel iron cross arm of suitable length for 2.4 m wide DP structure and erecting on DP with 50x6mm clamp complete as per specification no. OH-PL/BKT

Supplying and erecting ACSR conductor of size - 6/1-4.72 mm (Dog) complete. (394.00 kg/km) as per specification No. OH-CON/ACSR

Supplying and erecting porcelain disc type insulator 45KN with necessary hardware suitable for 11kV line complete as per specification no. OH-INS/DI

Supplying and erecting distribution class 11 kV thyrite type lightening arrester with nut bolts on provided MS channel as per specification no. OH-INS/LA

Supplying and erecting G.I. stay set for poles including loop insulators at inaccessible height with anchor plate 300x300x6mm. straining screws G.l. stay wire 7/10 SWG G.l. stay rod 20mmx1.8m length and pole clamps duly erected in provided cement con

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.

Supplying, installing, testing and commissioning of 3 phase 11/0.433 kV 50 Hz. 100 kVA Mineral oil immersed and naturally cooled outdoor type aluminium wound Non-sealed transformer delta/star connected with additional neutral brought out on load

Supplying and erecting 11 kV outdoor type gang operated air break triple pole switch 400 A capacity with 3 post pin type insulator per phase mounted in horizontal or vertical position with necessary channels on provided cross arm wit

Supplying and erecting 11 kV outdoor type drop out fuse with insulator complete with fuse holders fuse barrel with metal fitting fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross a

Supplying and erecting hard drawn copper solid wire no. 0 to 6 SWG complete erected for connections on H.T. sides.

Supplying and erecting extra thick alkathene pipe 10 mm dia. erected to enclose bare conductor wires complete.. (use shall be restricted to H.T.)

Supplying operating rod suitable for 11/22 kV supply with clamps for removing drop out fuses at 6 meters length 4 pieces each with rain shade with hand grip including earthling chain 1.5 m complete.(Light duty)

Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification no SS-AS/FSG

Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class GI pipe with angle iron supports chain link wire mesh (jali) complete supported on channel iron erected in foundation and painted complete as per sp

Providing printed instruction chart for treating persons suffering from electric shock printed in English & Marathi and duly laminated complete.

Providing pair of duly tested rubber hand gloves as per IS 47705 suitable for working up to 22 kV supply complete.

Supplying standard first aid box with necessary antiseptic cream medicine for use on wounds due burn crepe bandage gauge bandage medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use scissors anti-septic solution etc. (All abov

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS 15652 – 2006 having 2 mm thickness up to 3.3 kV

Supplying and spreading stone metal 25 mm size for 100 mm depth above the ground level complete.

Making transformer plinth (1.5 x 1.5 x 1.5) m in size with necessary excavation in ground with 150 mm. thick M- 10 PCC at the bottom and top and 250 mm. thick burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40

Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1 3 6 cement concrete 20 x 25 mm stone metal 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered with necessary curing and finishing

122160-6 of 2023-2024 - Providing 13 passanger lift for the proposed skywalk for Nimgaon Kandoba Temple premises Tal. Khed Dist. Pune Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections comp

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter duly erected on provided plate and box with wiring connections complete.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected.

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens min. efficacy of 110 lumen/W CRI>80 CCT upto 6500K Beam Angle of 120 deg. THD<10% p.f. >0.95 operating range of

Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens min. efficacy of 120 lumen/W CRI>80 CCT upto 6500K Beam Angle of 120 deg.

Supplying, erecting and marking SPMCB 6A to 32A B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking DPMCB 6 A to 32 A B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking TPMCB 6A to 32A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking FPMCB 6A to 32A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting single pole and neutral distribution board (SPNDB) with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs with door 1.2mm thickness surface / flush mounted IP 43 Protection on iron / GI frame as per specification no

Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying, fixing, and commissioning 2 pole RCBO 6/10/16/20/25A with overcurrent rated short-circuit breaking capacity (10 kA) and earth leakage protection with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per spe

Supplying, fixing, and commissioning 4 pole RCBO 6/10/16/20/25A with overcurrent rated short-circuit breaking capacity (10 kA) and earth leakage protection with 30/100/300 mA sensitivity and short circuit and earth leakage trip indications per specifi

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 2 core 4 sq mm copper conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specifi

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 6 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per spec

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all ma

Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EA-EP.

SITC of Electric Traction Passenger Lift with • Rated capacity - 13 Passenger/884Kg • Floors - G+1 floor (3 Stops/3 Landings) • Travel - 17 mtrs. • Location of Lift Machine - MR/MRL • Rated speed - 1.0mps VS • Car/Landing door clear opening of 900 mm wide x 2000 mm high • Clear Car size of 1100 mm wide x 2000 mm deep x 2250mm high • Lift shaft available having clear size of 2400 mm wide x 2400mm deep 1500 mm Pit depth 4500 mm Overhead. • Doors type - COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with s • Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm thick with hairline finish with frame made from MS girders bracing of adequate size with minimum safety factor of 5 with Toe Guard Apron with necessary false ceiling • COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI scrolling UP/DN LED indicator & with / without attendant key switch OWD with audio-visual alarm VAS in Marathi Hindi & English wi • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI Lift car arrival & next travel direction a • Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent overvoltage over speed overheat for • ARD complete with necessary SMF VRLA batteries. • Fireman controller having fireman switch at fire Landing. • CCTV surveillance system comprises of 2 nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with mi • Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory) with Traction pulley OSG electromagnetic brak • Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners counter weight frame with necessary blocks buffers with necessary support arrangement MS pit ladder etc. erected with necessar • Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill header hole pass etc complete with plaster finish civil work for erection buffers erection of lift machinery adequate • General - Job includes entire procedure of obtaining all necessary erection permissions & License to Work the Lift from Electrical Inspector(Lifts) with submission to the Engineer In Charge. • The above rate includes Fully Comprehensive AMC for one year from the date of commissioning. "ADD ON A3 :- For Lift having 900mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails"

D.G.BELHEKAR INFRA PVT LTD