Constructing Sakav at Terye Dalviwadi Road Gothani Tal Sangameshwar Year 2025 26

Item no.1:Cutting down trees including trunks and branches with girths above 30cm to 60cm and stacking the materials neatly with all lifts and lead of 1000m as directed and earth filling in the depression / pit if any.

Item no.2: Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete.

Item no.3:Excavation for foundation in hard rock by blasting including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete.

Item no.4: Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be

Item No.5:Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to b

Item No.6: Providing and laying in situ / ready mix M-20 cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu R.C.C.solid piers,column etc . including provision of V shaped false joints to form suitable panels on the faces to approve

Item No. 7 : Providing and laying in situ / ready mix controlled M-25 cement concrete of of trap / granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and abutments including necessary sacffolding plywood/steel formwork, compa

Item No.8: Providing and laying in situ / ready mix M20 RCC of trap/ granite/ quartzite/ gneiss metal for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforce

Item No. 9:Providing and laying in situ / ready mix M25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster ex

Item No. 10: Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete.

Item No. 11 : Providing tar paper bearing including laying in proper position etc. complete.

Item No. 12: Providing and laying cement concrete wearing coat M20 grade with batch mix type concrete mixer with SCADA including reinforcement as per drawings and technical specifications etc complete.

Item no 13: Providing soling using 80 mm size trap metal in 15 cm. layerincluding filling voids with Crushed sand/grit, ramming, wateringetc. Complete

Item no 14: Providing and laying in situ / ready mix M-15 cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu R.C.C.solid piers,column etc . including provision of V shaped false joints to form suitable panels on the faces to appro

Item No. 15: Providing 100mm diameter GI water spouts as per detailed drawings in RCC slab and wearing surface / kerb etc. complete.

Item No. 16: Providing and laying weep holes of 100 mm diameter AC/PVC pipes as per drawing for abutment returns, return walls etc. Complete.

Item No. 17: Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by sandy material)

Item No. 18:Providing and fixing in position Guard Railing as per Drg. No. 15 Type C dt. 20-4-79, with 3 rows of 50mm dia. G.I. pipe 30cm a part and fixed in M.S. channels of section 125 x 65 x 6 mm spaced 2.5 C/c 1:2:4 c.c. bedding of size 45 x 30cm. as

Item No. 19: Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete.

A)Sand - (sieve Analysis), silt and clay content

B)Metal -(Water absorption, specific gravity, impact value, crushing valu)

C)Cement -(Std. consistency, fineness,specific gravity, setting time, compressive strength soundness

D)Concrete Cube - compressive strength of CC cube

F) Steel i) up to 16 mm(set of 3 bars)

ii) above 16 mm( tensile strength, elongation, yield stress, wt. per meter, bend/ rebend test, proof stress.

G ) Concrete Mix Design With Normal Curing Method

Please Enable Macros to View BoQ information