SPECIAL REPAIR TO BLDG NO P 5 AT ARSENAL OF CAFVD KHADKI UNDER GE CENTRAL KHADKI

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings/wall cladding all as specifed and as directed.

S&F roof tiles, Mangalore Pattern, inter locking at side joints laid dry all as specified and as directed.

S&F ridge or hip tiles to suit Mangalore Pattern of roofing tiles bedded and jointed in CM 1:6 all as specified and as directed.

S&F 0.63mm thickness Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts and washers, in roofs (in any position and bent to any radius curve), walls etc. with grade of zinc coating 275 Gms/Sqm all as specified and directed.

S&F plain, galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) by using 1.00mm thick sheet grade of zinc coating @120 Gms/Sqm both sides and welded or soldered joints are provided all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles and removing the debris outside the defence land all as specified and directed

M&L Brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 in any position all as specifed and as directed.

M&L 15mm thick rendering on fair faces of concrete surfaces in CM 1:4, finished surfaces even and smooth without using extra cement all as specifed and as directed.

M&L 15mm thick rendering on fair faces of concrete surfaces in CM 1:6, finished surfaces even and smooth without using extra cement all as specifed and as directed.

Dismantaling of timber in scantling 40 sq.cm and over in section in any position and of any description framed work all as specifed and directed.

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 -W (Gde-E- 250) quality-A all as specifed and directed.

S&F in repairs Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290,Gde-E-165 all as specified and directed.

S&F gypsum reinforced boards 595x595x8 to 10mm thick for ceiling on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down old/existing ceiling boards of any type (fibre, pulp insulation etc) or insulation boards any thickness including fillets all as specified and as directed.

Taking down or chowkhat or frame area n. exc 1.5 Sqm each but with shutter (without taking off shutter from the frame) all as specified and directed.

Taking down chowkhat or frame area exc. 1.5 Sqm but n. exc 4 Sqm each but with shutter (without taking off shutter from the frame) all as specified and directed.

S&F 35mm thick 2nd class hard wood factory maid plain, framed, paneled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venered partical board with commercial veneering on both side faces. The size of rail and stile as per ISI 1003 (Part-I), kiln seasoned and chemically pressure treated (factory made shutter) all as specified and directed.

S&F 35mm thick 2nd class HW glazed and skelton shutter, wire mesh, open rebated and prepared to receive glass, gauze, etc. (without sach bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge, etc. size of shutters including wire mesh as specified in SSR-I all as specified and directed.

M&L PCC 25mm thick type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregate) as in flooring all as specifed and directed.

S&F Butt hinges, 150mm long, extruded aluminium alloy with galvanised mild steel hinge pin all as specified and directed.

S&F extruded aluminium handles, fabricated type polished 150mm long fixing with screws all as specifed and directed.

S&F Aluminium anodised, barrel tower bolt 200mm long, powder coated of extruded section and fixed all as specifed and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy 12mm dia all as specified and directed.

M&L 10mm thick rendering on brick /concrete surface in CM 1:6, finishing surfaces even & smooth without using extra cement and similar like at any height including necessary scaffolding, ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land all as specifed and as directed. Note : water proofing compound shall be measured & paid separetely.

M&L for washing, rubbing down and stopping of distempered and painted surfaces of manglore tile, AC sheet roof and applying two coats of exterior acrylic emulsion paint over one a coat of exterior primer all as specified and directed.

M&L for complete removal of existing treatement/old plastered/concrete surfaces from internal surface of wall by wire brushes and applying 2mm thick of Birla/JK wall care putty (one coat should not less than 1 mm) to obtain smooth regular/even finish using sand paper and applying two coats of acrylic oil bound distemper over a coat of alkali resistant primer upto height 10 mtr all as specified and directed.

M&L for complete removal of existing treatement on wall surfaces of any description including brooming down with steel wire brushing, scrapping down smoke soot's, moulds, moss and efflorescence, salts, trading oil greasy spots etc and applying two coats of Anti fungal weather proof grade exterior Acrylic emulsion paint of approved tint over a coat of weather proof primer including filling the cracks etc with crack filling upto 5 bars of positive hydrostatic pressure on vertical walls without any dilution with forced coverage not more than 3.5 Sqm/Ltr as per manufacturer instructions and all coats including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 Ltr per minute having a pressure of 3300 PSI, allow 6-8 hrs to dry the surface in subsequent coats of paint upto height 10 mtr including necessary scaffolding etc complete all as specified and as directed. Make : Apex Ultima Protek Asian Paints/Nerolac excel top guard/Berger weather coat long life 10 yrs.

M&L for preparation of new or previously untreated wooden surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for preparing new plastered surface of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces at any height including necessary scaffolding ladder all as specifed and directed.

M&L for preparing new plastered surface of walls and applying two coats of acrylic oil bond distemper over alkali resistant primer at any height including necessary scaffolding ladder all as specifed and directed.

M&L for preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed

M&L for preparation of old wood or wood based surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed.

S&F plain sheet glass 4mm thick, ordinary quality, not exc 0.50 Sqm in each pane fixed to aluminium door/window and steel window/frame with oil putty and securing pins, spring, clips all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples or with wooden beading on windows all as specified and directed.

Demolition of re-inforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) all as specifed and directed.

M&L TMT bars 8 mm dia and over, cut to length, bend to shape required including cranking, bending spirally for hoping for columns, RCC cover slab hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed.

M&L for providing, precast cement concrete (1:2:4) type B-1 (20mm graded crushed stone aggregate) set in CM (1:4) in landing, cover slab (for manhole etc) chullah hoods, chajja, water trough, shelves and similar articles with plane face including formwork all as specifed and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thickness (below of above ground level) and removing the debris outside the defence land all as specifed and directed.

M&L 75 mm thick PCC type D-2 (1:4:8) (using 40mm graded crushed stone aggregate) as in sub base all as specifed and directed.

M&L PCC (1:2:4) type B-2, 75mm thick (using 40mm graded stone aggregate), finishing top surfaces of cement concrete even and smooth without using extra cement and making joints filling with bitumen & sand mastic including necessary formwork all as specifed and directed.

M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in roof kerb or mud stop, rounded or chamferred on edges all as specifed and directed

M&L for Rubber moulded coloured glossy finish (Red, Yellow & Black) precast concrete interlocking paver blocks with grey cement and pigment of any shape and size, shade as approved by GE, 60mm thick conforming to IS 15658-2006 M-35 grade and interstices filled with sand including 25mm thick sand cushioning and including demolition of existing tiles and removal outside the MoD land complete all as specified and directed.

S&F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings all as specified and directed.

M&L for glazed vitrified tiles 8 to 10mm thick (square/rectangular) polished area of each tile 600mm x 600mm/1200 mm x 600mm over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land all as specified and directed.

All as per Ser item No 46 but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed.

Taking down carefully existing unserviceable aluminum / copper point wiring of any description & in any position with and including existing steel conduit / PVC Conduit / Casing caping fixed on surface/wall/angle/gardder and including all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, sockets, etc including sunken boxes/junction boxes and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces all as specified and directed.

M&L for point wiring in casing & caping of suitable size but not less than 20mm including all fittings such as elbow, bends, junction boxes, saddles, etc. on surface with and including ISI marked two runs of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sqmm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sqmm (green colour) ISI marked PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire to be terminated in and including PVC rectangular block of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover for one light point or one fan point controlled by one switch including making good the disturbed wall and painting the same with matching to existing wall all as specified and directed by Engineer in charge for one for light/fan/exhaust fan point controlled by one switch..

All as per Srl item No 49 above but point wiring for 5 pin switch socket outlet 5 Amps on independent board controlled by one switch.

All as per Srl item No 49 above but point wiring for 5 pin switch socket outlet 5 Amps on same board controlled by one switch.

All a s per Srl item No 49 above but point wiring for one 3 pin socket outlet. 15 amps,independent, with cables 4 sqmm size with using 4 sqmm two run and one run 4.0 sqmm (nominal area) stranded copper conductor.

S&F switch flush type, 5 Amps, single pole, one way, 230 volts AC circuit all as specified & directed

S&F socket outlet, five pin, 5 Amps, flush type, multipurpose, 230 volts AC circuit all as specified & directed

S&F switch flush type, 15 Amps, single pole, one way , 230 volts AC circuit all as specified & directed

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type, flush type, 230 volts AC circuit all as specified & directed

S&F ceiling rose PVC/polycarbonate, isolated body, three terminals all as specified & directed .

Supply, fixing, connecting and testing in replacement Industrial Earth Plug & socket with sheet metal enclosure of IP44 rating electric driven single phase including MCB 'C' series SP 20 Amps and supplied with neutral links all as specified and directed.

Dismantling and Taking out old unserviceable copper/aluminium sub main wiring/unarmoured cable (used as Sub main wiring) from any height of any Size and Core with all connecting accessories including conduit or casing caping and including making good to the disturbed wall and painting the same to match with existing wall surfaces all as specified and directed.

M&L Sub main wiring at any height and surface with and including two single core PVC insulated multi stranded copper conductor cable, ISI marked, FRLSH type, 2.5 Sqmm, 1100 volts grade, drawn through and including New casing caping including connected accessories and one single core PVC insulated multi stranded unsheathed copper conductor cable, ISI marked, FRLSH type, 2.5 sqmm, 1100 Volts grade, ISI marked, as earth contuinity wire all as specified and directed. Note:- (i) Two runs of cables & continuous earth wire in new PVC casing and caping will be measured as one unit length of sub main wiring).

M&L Sub main wiring at any height and surface with and including two single core PVC insulated multi stranded copper conductor cable, ISI marked, FRLSH type, 4.0 Sqmm, 1100 volts grade, drawn through and including New casing caping including connected accessories and one single core PVC insulated multi stranded unsheathed copper conductor cable, ISI marked, FRLSH type, 4.0 sqmm, 1100 Volts grade, ISI marked, as earth contuinity wire all as specified and directed by Engineer in charge. Note:- (i) Two runs of cables & continuous earth wire in new PVC casing and caping will be measured as one unit length of sub main wiring).

M&L Sub main wiring at any height and surface with and including two single core PVC insulated multi stranded copper conductor cable, ISI marked, FRLSH type, 6.0 Sqmm, 1100 volts grade, drawn through and including New casing caping including connected accessories and one single core PVC insulated multi stranded unsheathed copper conductor cable, ISI marked, FRLSH type, 6.0 sqmm, 1100 Volts grade, ISI marked, as earth contuinity wire all as specified and directed by Engineer in charge. Note:- (i) Two runs of cables & continuous earth wire in new PVC casing and caping will be measured as one unit length of sub main wiring).

Dismantling and Taking down unserviceable existing light fittings 1X 40 Watt / 2X 40 Watt of any size and capacity from any location/height after disconnecting of electrical connection complete including all connected accessories all as directed by Engr-in-Charge.

S&F CRCA housing box LED Type luminiare suitable for and including 2x20 W 4 feet long complete including tube rod & connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling all as specified & directed. Make: Crompton/ Havells/wipro

S&F 36W 2X2 LED recessed mounting light fitting complete including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling all as specified & directed. Make: Crompton /Bajaj/Havells

S&F LED Street light 60W including making electrical connection to the fitting with Suitable size of service wire. Make:- Crompton/Wipro/Philips

S&F in repairs street light mounting bracket, made out of Light grade GI Tubing 32 mm bore, bend into shape inner angle not less tan 120° and over all length not less tan 1.0 Mtr including suitable size clamps made from not less than 25x3 mm MS strip, Nut, bolts 12 mm dia with washers complete with fixing arrangement including taking down old one all as specified and directed.

Supply, fixing, connecting & testing sheet metal enclosures, double door, for SPN DBs suitable for single pole and neutral, 12 way, 240 volts IP 43 protection, with steel door having copper bus bars suitable for 200 Amps rating per phase and separate neutral, door earthing including taking down old DBs and making good the surface all as specified and directed.

Supply, fixing, connecting & testing sheet metal enclosures, double door, for SPN DBs suitable for single pole and neutral, 8 way, 240 volts IP 43 protection, with steel door having copper bus bars suitable for 200 Amps rating per phase and separate neutral, door earthing including taking down old DBs and making good the surface all as specified and directed.

Supply, fixing, connecting & testing of VTPN DB of 12 way suitable for MCCB up to 160A as a incomer & SP / TP MCB as a outgoings with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damage like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 36kA, shrouded neutral bar, Door earthing, corner Safe. wire sets, shrouded Neutral bar, earth bar & wire ties including taking down old DBs and making good the surface, all as specified & directed of Make Legrand Cat.No. 5077 48 or equivalent in Schneider- Acti-9/ L&T-Exora. Note : MCCB , MCB will be measured and paid separately under relevant item of this schedule.

S&F Thermal magnetic adjustable MCCB 160 Amps 4 pole with breaking capacity 16 KA & shall be Ics=Icu 100% all as specified and directed of make equivalent to Legrand/ Schneider-NSX/L&T.

S&F MCB single pole 6 to 32 Amps, 240 volts, 10 kA breaking capacity 'C' curve all as specified and directed.

S&F MCB Single pole & neutral 6 to 32 Amps, 240 volts, 10 kA breaking capacity, 'C' curve all as specified and directed.

Supply, laying, testing and commissioning 25 Sqmm 4 core cable XLPE Insulated, creened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 core including taking of old cable all as specified and directed by Engr-in-Charge.

S&F ceiling fans complete with blades, down rods, ectronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed. Note- Old unserviceable fan must be deposited to AGE E/M Store.

Taking down AC 1.5 ton/2 ton Indoor & Outdoor carefully with connected items carring to store after complting of B/R work refixing the same location all as specified and directed.

S&F in repairs G.I. HOT DIP / POWDER COATED PERFORATED TYPE CABLE TRAYS on wall/ceiling of size 75 mm width, 2 mm thickness, with 50 mm depth cover with necessary clamps, nuts, bolts for fixing of armoured cable all as specified and directed.

M&L for earthing complete with hot dip galvanized steel pipe in pipe electrode, outer pipe 88mm dia medium grade and inner pipe 55 mm dia including testing, 3 mtr long and having suitable size terminal on inner pipe to connect earthing strip with required size holes for nut bolts, buried directly and vertically in ground with top edge below ground level after making bore hole of suitable dia and required deep using suitable mechanical drilling machine (for drilling near the specified bldg) connected with galvanized steel earthing lead of 32x6 mm strip with minimum two Nos of GI nut bolits and connected to test point from earthing pit. The electrode pipes should be filled with 2x 25 kg bags of carbon based earthing compound. The resistance of the compound should be less than 0.1 Oms . The compound should be highly conductive, hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities with ph value between 7-9. Connected to the earthing test point, Fiber reinforced plastic pit not less than 300x300 mm with pit cover, including necessary returning, filling & removal of extra soil, to achieved earth resistance value less than 5 Oms including testing complete all as specified and directed. Make U-Protect or equivalent NOTE: IF the desired result not obtained after testing the contractor should do re-eathing without any extra cost.

S&F in repairs/replacement air termination at any height, single pointed, aluminium rod 19 mm dia and 600 mm long to be screwed and sturdily fixed to GI pipe of 40 mm dia with and including two no. sets of suitable size nut, bolt, washers (02 Nos.) all as specified and directed by Engr-in-Charge. NOTE - PCC block and GI pipe required shall be measured and paid separately under relevant items of Sch 'A'.

S&F in repair/replacement aluminium strip at any height of size 25 mm x 3.15 mm to procelain insulator with suitable saddles & fixing screws etc on roof or on wall (upto appx. 35 feet above GL) including of bitumen washer, nuts, bolts, etc. required to fix the strip on existing serviceable or new insulators all as specified and directed. NOTE - Cost of suitable fixing jobs like drilling, welding, etc. required for fixing of strip and insulators on the any existing surface like PCC wall, asbestos sheet, etc. at site is deemed to be included in the quoted rate.

all as per item No 80 above but GI strip 32 mm x 6 mm.

M&L for fixing and connecting in replacement of test point terminal block made out of gun metal or phosphorus bronze size 75 x 75 x 25 mm thick drilled and screwed including 03 Nos 8 mm dia 25 mm long hexagonal head screws fixed to GI strip bracket fixed to porcelain insulator on wall as in repairs, complete all as specified and directed. Note: Porcelain insulator will be measured & paid separetly.

S&F in replacement of Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 50mm height, 65mm dia for 550 volts to be fixed on wall or on roof (upto. 35 feet above GL) for fixing of GI or copper conductor earth continuity strip all as specified and directed. NOTE - Cost of suitable fixing jobs like drilling, welding, etc. required for fixing of strip and insulators on the any surface at site is deemed to be included in the quoted rate.

M&L for earthing complete with 17.2 mm Copper bonded Earthing rod including Short circuit testing of minimum 40 KA at CPRI/NABL, 3 mtr long and having copper bonding thickness will be minimum 250 microns and copper bonded terminal to connect earthing strip with suitable depth holes for nut bolts, buried directly and vertically in ground with top edge below ground level after making bore hole of required dia and 3-4 mtr deep using suitable mechanical drilling machine (for drilling near the specified bldg) connected with galvanized steel earthing lead of 32x6 mm strip with minimum two Nos of GI nut bolts and connected to test point from earthing pit. Area between pipe and copper rod filled with Dry type chemical powder.The electrode pipes should be filled with 2x 25 kg bags of carbide based BFC earthing compound of product code BFC25SILVR. The resistance of the compound should be less than 0.1 Ohms. The compound should be highly conductive, hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities with ph value between 7-9. Connected to the earthing test point, Special high grade polymer compound Round earth pit with pit cover, including necessary returning filling & removal of extra soil, to achieved earth resistance value less than 1 Oms including testing all as specified and directed. Make U-Protect or equivalent NOTE: IF the desired result not obtained after testing the contractor should do re-eathing without any extra cost.

S&F in repairs/replacement of 02 RM long 40mm dia. light grade GI pipe with provision of two no. holes (at appropriate off sets as approved by Engr-in-Charge) on its body so as to fix 19mm dia aluminium air termination rod at top and 02 Nos. 12 cm long criss-cross welded 8mm dia TMT bar arrangement at the bottom and to be grouted in PCC block at any height all as specified and directed. Note :- (a). Necessary safety measures are to be taken while carrying out repair works. (b) Proper Scaffolding arrangement/ladder(s) is to be used and the rate of the same is deemed to be included in the quoted rates. (c) Any damage/loss to govt. property will be make good by the contractor at his own cost. (d) Labour employed shall be given all saftey equipments like saftey belts and connected items.

H S TAKHI (BID ID -3462107)

MANIYA CONSTRUCTION CO (BID ID -3458267)

L.K.R.TIWARI CONSTRUCTION (BID ID -3463988)

UNIQUE ENGINEERS (BID ID -3458643)

MAHESH DADAJI BACHHAV (BID ID -3457996)

S.R.M.K Enterprises (BID ID -3458710)

Bidder Name

H S TAKHI

V.R.PRAJAPATI AND CO.

UNIQUE ENGINEERS

S.R.M.K Enterprises

L.K.R.TIWARI CONSTRUCTION

MAHESH DADAJI BACHHAV

MANIYA CONSTRUCTION CO