REPAIR / REPLACEMENT OF DEFECTIVE SPARES AND COMPREHENSIVE MAINTENANCE OF ELECTRIC POWER FENCING AND CCTV CAMERA INSTALLED AT DCN PALAM UNDER GE(U) PM DELHI CANTT-10

Amount

SECTION-I

Comprehensive maintenance of wall top perimeter electrical power fence 1.2 Mtr height with 12 HT wire divided into 3 Zones and 3.2 Meter height with 30 HT wire divided into 01 Zone (make of A1 fence) including network fence controller software complete and make system fully functioning condition installed at DCN Palam complete all as directed by Engr-in-charge. The details of the equipment /system to be included in the AMC are as under :- (a) 12 HT electric power fence ( make- A1 fence) - 470 RM (b) 30 HT electric power fence ( make- A1 fence) - 140 RM (c) Nework fence controller and keypad and perimeter control - 04 Nos software complete. ( make- A1 fence) (d) SM OFC 12 Core ( Make - Diglink) - 600 RM (e) Work station with 21" LCD TV monitor along with software ( Make -DELL) - 01 No

Notes for Section-I (Item No. 2.00) :- (i) The comprehensive maintenance shall be done through OEM i.e. of M/s Altima Security Technologies P. Ltd. (ii) The contractor will have to submit MOU on stamp paper of Rs 100/- duly notarized, as per specified Performa given on page No 101 to 103 from OEM i.e. of M/s Altima Security Technologies P. Ltd. within Twenty Eight days from date of Acceptance of tender. If the delay from OEM side to submit the MoU, the contractor to be submit evidence to the Accepting Officer and permission to be obtained from Accepting Officer for delay in submission of MoU. (iii) Contractor will conclude AMC with OEM and copy of the Agreement along with Tax Invoice will be submitted to Engineer-in-Charge and GE before commencement of AMC. No payment will be made to contractor without submission of valid AMC agreement and Tax invoice. (iv) The above maintenance includes complete maintenance of existing equipment by regularly and systematically examining adjusting fabricating as and when required for smooth and efficient functioning of the equipment. (v) The contract includes for repair, replacement of Network electrical power fence complete i.e wire, OFC cable, pole, software and hardware controller ,insulator, LCD monitoring display. (vi) Quality of spares: The equipment ( Network for electric power fence and controller device) parts replaced must be new and equivalent in performance of existing part. (vii) The above maintenance includes complete maintenance of existing electrical power fence system by regularly and systematically examining as required for smooth and efficient functioning of the equipment. (viii) On each visit of the maintenance staff, a certificate to the effect will be co-signed by the user and Engineer-in-charge for verifying the visit. (ix) Quarterly preventive maintenance visit will be comprised with a team of an Engineer/ Technicianand also visit shall be made as and when requiredbasis. (x) Any repair/ replacement of equipment part will be replenised withoutadding any cost to department except modification/ Upgradation of hardware/ software of equipment.

Comprehensive Maintenance for IP Based Network CCTV Camera with their accessories in installed at DCN Palam complete all as directed by Engr-in-charge The details of the IP Network CCTV camera and their accessories to be included in the AMC are as under :- (a) High Speed outdoor IP Camera PTZ ( Make of Bosch) - 06 Nos (b) HD outdoor/indoor IP Camera (fixed) ( Make of MOBOTIX) - 26 Nos (c) CCTV Software for server with 36 camera ( Make of MOBOTIX) - 01 Lot (d) Speed dome controller /PTZ controller( make of MOBOTIX) - 01 No (e) VMS Server complete ( make of Dellmicrosoft) ) - 01 No (f) 12 core SM OFC cable - 600 RM (g) Layer 3/2 Switches with accessories ( Make of HP,Comnet) - 11 Nos (h) 24 Port light guide interconnect Unit , LIU (make of Diglink) -02 Nos (i) 04 port controller server ( make of Barco) - 01 No (j) 30 TB network recorder complete( Make of Synolgy) - 01 No (k) 42" LED TV Full HD for monitoring ( make of LG) - 02 Nos (l) 2 x 2 LED 55' LED video walls display 4 screen ( make of BARCO) -01 No (m) 5 KVA online UPS complete with backup (make of Emerson) -01 No

Notes for Section-I (Item No. 3.00) :- (i) The Comprehensive maintenance in respect of IP Based Network CCTV camera under this contract shall be done through OEMs or any authorized dealers i.e. any one of M/s Mobotix / M/s Bosch / M/s Barco / M/s Diglink / M/s Synolgy/ M/s LG/ M/s Hikvision. (ii) The contractor will have to submit MOU on stamp paper of Rs 100/- duly notarized, as per specified Performa given on page No 101 to 103 from respective OEMs or any authorized dealers i.e. any one of M/s Mobotix / M/s Bosch / M/s Barco / M/s Diglink / M/s Synollgy/ M/s LG/ M/s Hikvision within Twenty Eight days from date of Acceptance of tender. If the delay from OEM side to submit the MoU, the contractor to be submit evidence to the Accepting Officer and permission to be obtained from Accepting Officer for delay in submission of MoU. (iii) Contractor will conclude AMC with OEM / and authorised dealers and copy of the Agreement along with Tax Invoice will be submitted to Engineer-in-Charge and GE before commencement of AMC. No payment will be made to contractor without submission of valid AMC agreement and Tax Invoice. (iv) The above maintenance include complete maintenance of existing equipment by regularly and systematically examining adjusting fabricating, monitoring as and when required for smooth and efficient functioning of the equipment. (v) Repair, maintenance of the total Hardware and software maintenance and troubleshooting for CCTV i.e Camera Visibility Test, DVR / NVR Recording Test, DVR / NVR Settings,controller server,keypad, Verification, and Disk Error Check, LED display monitoring complete part of Network of CCTV camera . Replacement of CCTV parts, and some consumable items and the maximum repair to the defective component of CCTV camera and their part are covered under AMC. (vi) Minimum one visit will be comprise a team of technician are allocated for each month. (vii) In case of any technical snag, it should be attended within 24 hours and ensure attending the break down calls on urgent basis. (viii) The equipment like replacement of CCTV Camera, NVR,VMS Software & hardware controller, electrical control panel, LED TV, video wall, LAYER switches, Hard disk, UTP & OFC cable, MCB shall be paid separately.

Notes for Section-I (Item No. 2.00 and 3.00) :- (a) Contractor will prominently display his contact/ mobile number and OEM contact number and authorised dealer's number inside and outside the server room, Security Office as well as in the complaint cell of DCN Palam for call in emergency. (bi) The OEM will also detail one technician staff to inspect the equipment every week regarding functioning of the equipments or any other issues arising in the equipment. The details of technician shall be forwarded for approval before commencement of work. The problem noticed if any to be informed immediately to JE E/M / Engr-in-Charge. Incase no technician detailed Rs. 500/- per week per equipment will be deducted from conctractors dues. Technician should always carry service tools during site visit in every week. (c) Fortnightly maintenance check for respective equipment will be carried out by OEM of electric power fencing and from any authorised dealer of CCTV Cameras as per fortnightly maintenance check list mentioned in Particular Specification here-in-after.

SECTION-II

Supply & fixing of 'B' Curve MCB DP 10 Amp,with rupturing capacity 10KA, 230 volt incluing PVC box mounting complete all as specified & directed by Engr-in-charge. (Make- L&T/Legrand/Siemens/ ABB)

Supply and fixing in replacement of high speed IP outoor PTZ Camera 2MP with metal bodyand disigned to capture high quality colour image inlow-light environments 1/2.8 inch progressive scan CMOS upto 05 faces captureat the sdame time, min illumination-color 0.005 lux @ (F1.6 AGC ON), 25 x optical zoom, 16 x digital zoom complete all mounting /installation accessories, fittings as per existing location complete all as specified and directed by Engr-in-charge. (Make:- BOSCH / Hikvision / Panasonic / Bajaj/ Honeywell)

Supply and fixing in replacement of High speed 2MP smart IP outdoor bullet Camera (fixed) with metal body and disigned to capture high quality colour image inlow-light environments and supports full HD, highframe rate resolution upto 60 fps, water and dust resistenance (IP 67), 1/2.7 inch progressive scan CMOS, Day & Night auto IR cut filter with auto switch, min illumination-color 0.01 lux @ (F2.0 AGC ON), 0 Lux with IR, Aperture-F2.0 complete all mounting /installation accessories, fittings as per existing location complete all as specified and directed by Engr-in-charge. (Make:- BOSCH / Hikvision / Panasonic / Bajaj/ Honeywell)

Supply and fixing in replacement of High speed 2MP smart IP indoor bullet Camera (fixed) with disigned to capture high quality colour image inlow-light environments and supports full HD, highframe rate 1/2.8 inch progressive Scan CMOS, Day & Night auto IR cut filter with auto switch, protacting rating IP 66, H.264/MJPEG Type, min illumination-color 0.01 lux @ (F1.2 AGC ON), 0.028 Lux Aperture-F2.0 complete all mounting /installation accessories, fittings as per existing location complete all as specified and directed by Engr-in-charge. (Make:- BOSCH / Hikvision / Panasonic / Bajaj/ Honeywell)

Supply and fixing in replacement of dective 4TB My Passport Portable External Hard drive, Black with automatic backup, 256 Bit complete all as specified and directed by by Engr-in-Charge. (Make:- Seagate/WD)

Supply and fixing in replacement of 12 Core SM optic Fibre Communication cable with the required termination to all point of camera loaction as per site requiremt complete all as specified and directed by Engr-in-Charge. (Make:- Diglink / Finolex / Usha-Martin / Havells)

Supply and laying in replacement of 40 mm dia HDPE Pipe complete with bend and clamps for fixing on complete as per site requiremt all as specified and directed by Engr-in-Charge. (Make:- Ashirvad Pipes/ Supreme/ Prayag/ Prince)

Supply and fixing in replacement of armoured UTP cat 6 cable including clamp for fixing on wall /roof/ceiling etc complete as per site requiremt all as specified and directed by Engr-in-Charge. (Make:- Diglink / D-link / Polycab)

Supply and fixing in replacement of Battery 12V 26 AH sealed maintenance free battery with 1 year of warranty for UPS complete all as specified and directed by Engr-in-Charge. (Make :- EXIDE/ AMARON/ STANDARD FURKKAVA)

Supply and fixing in replacement Managed Ethernet Switch with (8) 10/100TX + (2) 10/100/1000TX / 1000FX RJ45 or 1000 FX SFP Ports as per Model No CNGE2FE8MSPOE Complete mounting as per existing place all as specified and directed by Engineer-in-Charge. (Make - Comnet Communication network / D-Link)

Supply and fixing in replacement of switch socket combination 5/6 Amp including PVC box mounting complete fitting as per existing location all as specified and directed by Engineer-in-Charge. (Make - Anchor / Havells / SSK / Indo-Asian)

Supply and fixing in replacement of Single pole 'B' Curve MCB 16 Amps with rupturing capacity 10KA, 230 volts complete all as specified and directed by Engineer-in-Charge. (Make - L&T / Legrand /Siemens/ ABB)

Supply and fixing in replacement of Double pole 'B' Curve MCB 32 Amps, with rupturing capacity 16KA, 230 volts complete all as specified and directed by Engineer-in-Charge. (Make - L&T / Legrand /Siemens/ABB)

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, for laying of pipes / cables / poles etc., or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10Sqm on plan and getting out in soft / loose soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in trenches/ Back filling of retaining walls with approved soil, including spreading, levelling, watering and well ramming in layers n.exc. 25cm complete all as specified and directed by Engineer-in-Charge.

Removing excavated soils to a distance not exceeding 50m and depositing where directed at level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.

MV Engineers And Contractors

PARAS ENTERPRISES