8285 REPAIRS TO PLUMBING, SANITARY FITTINGS, FLOORING WORKS AND MISC JOINERY WORK IN MD AND OTM ACCN AT VBV, MAP PH-I, DCA AND 10 SIKH REGT AREA UNDER AGE BR I SOUTH PUNE

Amount

Taking down wooden door shutter and refixing in including resecuring or easing and adjusting in the same opening exc 1.00 but not exc 2.00 sqm each complete all as specified and as directed.

Taking down angle iron/ wooden chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sqm but not exc. 4 sqm each and removed to store complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and as directed.

S&F Pressed steel door frame of frame size 105x60mm with one or more revates incl necessary fixing,hinges,lock strike plate etc including filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S&F in repair pressed steel frame size 125x60mm for doors with one or more rebates incl necessary fixing lugs. Hinges lock strike plate etc including filled with complete all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with particle board core and one face is covered with decorative face veneer with lipping/frame to match, supplied and fitted to chowkats complete all as specified and as directed.

S & F 30 mm thick Iind class hard wood glazed and skeleton shutters, devided into squres with plain, chamfered or rounded mitered and rebated sash bars any numbers, open rebated prepared to receive guaze, edges of framing plain, chamfered or rounded , fitted with cut and mitered beads for securing glass etc size of members of shutters in SSR Part- I, Section 8, Clause 8.24 (a)

S & F in repair stainless steel wirecloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm & fixed with stainless steel wire stapples complete all as specified and as directed.

M & L preparation of new or priviously untreated surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to newly wood surfaces complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings complete all as specified and as directed>

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat molded plain co lour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for steel & plain co lour PVC sheets for top rail, lock rail& bottom rail on either side & or gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet banding, and joints to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as spcified and as directed.

S&F in repair 200 mm aluminium anodized barrel tower bolts of extruded section for door shutters complete all as specified and as directed.

S & F in repair 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specified and as directed.

S & F in repair 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

Taking down / cutting steel window shutters by means of gas cutter without disturbing of soffit / jambs / cills etc. of any description n.exc. 1.5 sqm (without taking off guard bars) complete all as specified and as directed.

S&F three track sliding window with two or more shutter witth 4 mm thick tinted glass, one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Vertical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352

S&F ventilators/ louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc complete all as specified and as directed. (a) SP 20048 (b) Glazing clips 19352

S&F in repair aluminium powder coated fancy type curtain rod 25mm bore complete all as specified and as directed.

S & F in repair aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc and repair the damaged surface and match with the existing complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for coloured Ceramics tiles 450x300x7to8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces complete all as specified and as directed.

M&L Non skid ceramic colored tiles 7 to 8mm thick, (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer as in CM 1:6 complete all as specified and as directed.

M&L Non skid ceramic colored tiles 7 to 8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer as in CM 1:6 complete all as specified and as directed.

Demolition of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M & L for granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill , cooking platform and flooring in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with and including screed bed or bedding layer 15 mm thick, in CM 1:6 on stone masonry surfaces complete all as specified and as directed.

M&L for Machine cut cudappah stone slab 20mm to 25 thick, over cement screed base laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

Taking up or down steel tubing 15 mm bore & connections complete all as specified and as directed.

S & F 15 mm GI tubing medium grade with all fittings & fixed complete to walls / ceiling or laid in floors complete all as specified & as directed.

Taking up or down steel tubing 20 mm bore & connections complete all as specified and as directed.

S & F 20 mm GI tubing medium grade with all fittings & fixed complete to walls / ceiling or laid in floors all as specified & as directed.

S & F in repairs vitreous china squatting Pan " Orissa " pattern of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and as directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F in repairs wash hand basins, vitreous china of size 550mm X 400mm (flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of supply and fixing waste pipe etc. complete all as specified and as directed.

S & F in repair 15 mm bore pillar taps,fancy type swan neck spout (Left) and aerator, cat No. F2002104 of cera or of equivalent make specified here-in-after all as specified and as directed.

S & F in repairs 15 mm bore bib taps,fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair 32 mm bore waste fittings brass chromium plated with long screwed shanks and fly nuts,screwed for iron pipe .

S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed.

S & F in repairs 15 mm stop valves, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

All as per item No. 39.00 above but consealed long shank complete all as specified and as directed.

S & F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, including flush pipe 32 mm bore complete all as specified and as directed.

S & F gratings 100 mm dia of PTMT ( minimum wt 25 gms) complete all as specified and as directed.

S & F in repairs chromium plated soap dish fixed to plugs with chromium plated brass screws as fixed complete all as specified and as directed.

S & F in repairs 125 mm dia swivel type brass chromium plated shower rose of approved quality complete all as specified and as directed.

S & F in repairs for health faucet including flexible cod confirming to CAT No. ALD-573 of Jaquar or of equivalent make specified here-in-after.

M & L for Cleaning of PVC water tank of capacity exc 250 but n.exc 500 ltr and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and as directed.

S & F in repairs ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 20 mm bore (210 gms weight) complete all as specified and as directed.

S & F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling of old pipes complete all as specified and as directed.

All as per item No. 48.00 above but 110 mm bore complete all as specified and as directed.

S & F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified & directed.

All as per item No. 50.00 above but 110 mm bore complete all as specified and as directed.

S & F in repair 75 mm bore PVC (SWR) bends any radius provided with access door complete all as specified & directed.

All as per item No. 52.00 above but 110 mm bore complete all as specified and as directed.

S & F in repair Transparent Glass 7.5 x 7.5 inch corner bathroom shelves with bracket (set of 2) (Model- Joyo Cera Gls 132) complete all as specified and as directed.

S & F in repairs brass chromium plated Tubular towel rail 20mm dia "D" type 60cm long complete all as specified and as directed.

S & F in repair towel ring square CAT No CAN 1121 N of Jaquar or of equivalent make specified here-in-after complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type B2 (using 20mm graded aggregate) as in plinth protection/hard standing, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed

M&L for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring complete all as specified and as directed.

M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 305mm x 305mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for coloured precast cement concrete interlocking tiles 60mm thick, of any shape and size, conforming to IS-15658-2006 glossy finish as in floor/pavement laid over 50mm thick stone dust cushioning, laid dry to the profile over hard concrete sub base complete all as specified and as directed.

REKHA ELECTRICALS

TULSAYA CONSTRUCTION

R k construction

Gauri Associates

M/s Kumar Rohidas Aher

Parhar Enterprise

M/s Omkar Associates

L.K.R.TIWARI CONSTRUCTION

M/S Sandeep Enterprises