15th Finance Tied Grand 25 26 Ist Installment

Dismantling the Reinforced Cement Concrete at Existing Damaged OHT including cost and conveyance of all charges etc., Complete

Towards the Charges for Conveyance of Old Damaged Dismantled RCC items to the Low Lying Area in Town panchayat limit

Earth work excavation for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring and strutting and balling out water wherever necessary refilling the sides of foundation with excavated earth in layers of not more than 15cm thick well rammed and consolidated depositing the surplus earth within the compound with an initial lead of 10cm and lift of 2m in places shown by the departmental officers clearing and levelling the site etc., complete complying with standard specification i) First depth of 2m - All types of Soil

ii) SDR

Sand filling for foundation with clear river sand including cost of sand, watering, remming and consolidation etc., complete as directed by departmental officers.

Plain Cement concrete 1:4:8 (one cement four sand and eight Coarse aggregate) using 40mm hard broken granite Metal for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick well rammed and consolidated complying with standard specification.

Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). A) 1.5m to 4.5m below G.L.

B) 0m to 1.50m below G.L.

C) 0m to 4.5m from G.L.

D) 4.5m to 7.32m from GL