Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.7 LAccepted-AOC | L1 | Accepted-AOC Documents found in order Being L1 | |
| 2 | L2₹39.9 L+₹5.1 L (14.8%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹49.7 L+₹14.9 L (43.0%)Rejected-Finance NAROO PO ICHIGAM BADGAM KASHMIR 191111 J K | ICHIGAM | BADGAM | JAMMU AND KASHMIR | 191111 | L3 | Rejected-Finance Being L3 |
Tender Value
₹33.9 L
EMD Value
₹67,800
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Sriangar
GE AF SRINAGAR AFSTN SRINAGAR 190007
PROVISION OF WEATHER SHELTER AT 45 WEU AT AF STATION SRINAGAR
2022_MES_515969_3
GE(AF)SGR- 28 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE AF SRINAGAR
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) SRINAGAR
₹67,800
20 Aug 2022
25 Jun 2022
29 Jul 2022
25 Jun 2022
27 Jul 2022
2 Jul 2022
60 days
Amount
Surface excavation n. exc. 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil.
Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5 m in depth and getting out in soft / loose soil, complete all as specified.
M&L for PCC 1:4:8 type-D2 (using 40mm graded aggregate), as in foundations, filling and mass concrete, complete all as specified and.
M&L for RCC design mix M-30 grade, using 20 mm graded stone aggregate as in foundation, footings, plinth Beam and similar RCC works complete all as specified and as directed by the Engineer-in-Charge.
M&L for RCC design mix M-30 grade, using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts & similar RCC works complete all as specified and as directed by the Engineer-in-Charge.
Use & waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams and similar works for rough finished surface complete all as directed.
Use & waste form work to sides of pillars, posts and columns for rough finished surface of concrete complete all as directed.
M&L for steel reinforcement of TMT bars (Fe-500 Grade) 10 mm dia and over cut to length and bent to shape required including cranking bending spirally, hooking end and binding with mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips all as specified and directed.
M&L for steel reinforcement of TMT bars (Fe-500 Grade) not exc 10 mm dia as in stirrups cut to length and bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified and as directed by the Engineer-in-Charge.
Filling of excavated soil in floor, including spreading, leveling in layers n exc. 25 cm thick, well ramming including watering as required, complete all as specified and directed.
Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified.
M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius with old size bricks built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.
M&L for Providing cement concrete type B-1, 1:2:4, using 20 mm graded stone aggregate, as in copings, lintels up to 1.5 m span, apex stones, bed plates, kerbs / benching to manhole etc including weathering, slightly rounded or chamfered angles and throating as directed
M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces of walls including finishing the surface even and smooth with using extra cement complete all as specified and as directed by Engineer-in-Charge. .
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.
M&L for 100 mm thick cement concrete 1:4:8, type D-2,(using 40 mm graded stone aggregate) as in Sub base for path / flooring complete all as specified and as directed.
M&L for screed bed or bedding layers of 20 mm thick for laying floors in CM 1:4 complete all as specified.
M&L machine cut kota stone slab flooring 20-25 mm thick as in floor, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed by Engineer-in -Charge.
M&L for pre-fabricated PUF insulated 80 mm thick panels as in wall / partition wall with 0.50 mm thick PPGI sheet on both faces of PUF panels with tongue and groove arrangement for better jointed strength and fixing with self tapping screws including necessary PPGI sheet channels for fixing of panel, flashing work, as required to cover the PUF panel joints, all as per manufacturer's instructions, complete all as specified.
M&L for pre-fabricated PUF insulated 40 mm thick panels for ceiling with 0.5 mm thick PPGI sheet on both faces of PUF panels tongue and groove arrangement for better jointed strength and fixing with self tapping screws including necessary PPGI sheet channels for fixing of panels, flashing work required to cover the PUF panel joints, all as per manufacturer's instructions, complete all as specified.
Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly paneled with 5 mm thick aluminium camposit panel of approved colour & pattern including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size (2 Nos), aluminium barrel tower bolt 200 mm size (3 Nos), mortise lock etc all as specified below complete all as specified and directed.
(a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be of 0.80 mm thick (Section No 19370).
Note:- (i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx A (ii) Floor door spring will be measured & paid separately.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in position complete all as specified and as directed by Engineer-in-Charge
Supply fabricate & fix in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832)
(c) Top & side Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20736) Note:- Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx A
S&F aluminium grill, powder coated (minimum thickness of powder coating 50 micron) 5.5 mm thick and size of aperture 105 mm x 99 mm fixing with and including alunimium U channel as per manufacturer instruction, all as specified.
S&F rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, confirming to Gde Fe-410W (grade E-250) quality B, all as specified.
S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, Fe-410-W (Gde-E-250) quality A, all as specified.
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, of length exc 15cm but n exc 22.5 cm & diameter 11 to 20 mm, complete all as specified and directed.
M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, all as specified.
S&F pre-painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with drilling / self tapping screws all as specified.
S&F pre-painted galvaume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof ridges, fixed with drilling / self tapping screws as specified, complete all as specified.
M&L for hardcore of broken stones or boulders of gauge n exc. 63 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface of broken stone or boulders, complete all as specified.
M&L for 75 mm thick PCC 1:3:6, type C-2 (using 40mm graded aggregates), as in plinth protection and finished the surface even and smooth without using extra cement, complete all as specified.
M & L for dry river sand screed bed for PCC paver block, including gently compacting complete all a specified and directed. NOTE :- compacted thickness of sand will be measured and paid. )
Material & Labour for machine pressed precast concrete interlocking paver block confirming to IS 15658, of approved shape and size of 80 mm thickness, with minimum compressive strength of 40 N / Sqmm (M-40 grade), without correction factor for chamfering, made in rubber moulds, with white cement and pigment laid over existing screed bed complete
M&L for filleting in any position and to any shape in cement mortar 1:3 or cement concrete 1:2:4 including all miters, stops, etc., section of fillet exc 25 Sqcm but n exc 50 Sqcm, complete all as specified and directed.
M&L for cement concrete 1:3:6, type C-2 (using 40 mm graded aggregates), as in surface channels and drain, complete all as specified.
M&L for Extra over item No 37 above for forming fair finished drains or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc, complete all as specified.
Material & Labour for flame proof, point wiring for one light / Fan point controlled by one flameproof switch, complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, FR-LSH (Flame Retardant Low Smoke & Halogen) cable 1100 volts grade ISI marked drawn and including mild steel ERW conduit not less than 20 mm dia, including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, FR-LSH cable as a earth wire connected to common earth dolly, etc complete. Note - Colour code of cable shall be Phase-Red, Neutral- Black and Earth -Green.
Supply and fix Flame proof Junction box suitable for 30 Amps in aluminium alloy LM 6 Construction with one / 2 nos, 3/4 " ET entries, certified by CMRS , Dhanbad for Group I, IIA, IIB, complete all as specified & directed.
Supply and fix Flame proof rotary switch ( Isolator ) rating 16 Amps. Single pole ON / OFF in aluminium alloy LM 6 Construction with one/ 2 nos, 3/4 " ET entries, certified by CMRS , Dhanbad for Group I, IIA, IIB, complete all as specified & directed.
Supply and fix flame proof light fitting 1 x 16 watt with built in electronic driver in aluminium alloy LM 6 construction, CMRI certified, Recommended for Gas / Vapor group of II A & II B & Zone 1 with all accessories pre-wired and including connecting up with copper conductor cable of suitable type complete. Make Crompton Cat No EXTN1LT8-16 or equivalent of make mention Appx A.
Supply and fix flame proof and weather proof industrial type DBs SPN 240 Volt 8 way, in aluminium alloy LM 6 construction, CMRI certified, Recommended for Gas / Vapor group of II A & II B & Zone 1 as per IS 2147, with various combination of incoming and outgoing MCB suitable for and including 04 No FLP MCB SP 06 Amps, 10 kA, 240 volt including necessary connection complete.
Supply and fix flame proof exhaust fan of size 450 mm (18'') sweep 240 V 50 Hz , 1440 RPM single phase heavy duty in aluminium alloy LM 6 construction, CMRI certified, Recommended for Gas / Vapor group of II A & II B & Zone 1 as per IS 2147 complete with louver shutter and connecting complete all as specified & directed.
Material and labour for renewal earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to galvanized steel wire 4 mm dia by means of bolts nuts check nuts and washer of galvanized steel, watering pipe of 20 mm bore, galvanised iron, medium grade, and 15 mm bore galvanised iron light grade for earth wire protection including all excavation earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 and RCC 1:2:4, type B1 for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing on completion.
Note:- Quoted rates shall be deemed to include for earth wire with protection pipe up to 7.5 M length.
Supply & lay XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium conductor 1100 volt grade of size 25 Sqmm, 4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc complete all as specified & directed. Note:- Earthwork, sand cushion, cable cover if required will be measured and paid separately under respective items of this Schedule.
M&L for providing dry river sand as in sand cushioning below and above cable thickness as specified in SSR to under ground cable including punning down of sand in layer all as specified and directed by Engg-in-Charge. Note: for measurement purpose punned thickness of sand will be consider.
Supply and Laying of bricks well burnt sub class B (old size) laid flat for cable protection width equal to the length of bricks complete all as specified and directed by Engineer-in-Charge.
S&F in repair 40 mm dia bore mild steel galvanized iron tubes, 'light grade' with all fitting and laid in trenches or fixed to pole or laid in floors for protection of cable complete all as directed.
M/S M.A. Construction
M/S Abdul Ahad Rather
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .