DEMOLITION AND RECONSTRUCTION OF STONE MASONRY RETAINING WALL BETWEEN P-13A AND P-14 AT NSB AND PROVN OF WASH ROOM FOR HTL WORKSHOP (BLDG NO P-46) AT NAD (T) UNDER GE (NW) MANKHURD

Amount

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for

Dismantling of Brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in soft loose soil.

Excavating in trenches, n. exc. 1.5 m wide and n. exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard/dense soil.

Excavating in trenches for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10 Sqm on plan and not exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and as directed.

Excavation in over areas and n exc 1.5 m in depth for foundation ,etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 in depth and getting out Hard/dense soil.

Excavation over areas exc 1.5m in depth and not exc 3.0m in depth in hard/dense soil for foundation etc and getting out, complete all as specified and directed.

M & L Moorum /red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering

M & L for hard core of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified.

M & L 75 mm thick Cement concrete type D-2 1:4:8 (40mm graded aggregate) as in Sub-Floors, Sub-Bases, Floors and pavings, etc all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm

Removing excavated material (soil) n exc 50 Mtr and depositing where directed at a level n exc 1.5 Mtr above the starting point.

Removing and disposing off the excavated material/soil out side MD Land, complete all as specified and directed. Note: For payment purposes, quantity of excavation after deduction of the quantity of returning filling, shall only be payable under this item.

M & L Pre-cast cement concrete Type C1 1:3:6 (20mm graded aggregate) block masonry with solid blocks, exc 10 cm in width and setting in cement mortar 1:6, complete all as specified and all as directed.

M & L Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6, exc. 10 cm in width and setting in Cement mortar (1:4) mortar, complete.

Material and labour for Plain Cement Concrete (1:3:6) Type C-2 (using 40 mm graded brocken stone aggregate) as in foundation of manholes including necessary formwork complete all as specified and directed.

Material and labour for Plain Cement Concrete (1:3:6) Type C-2 (using 40 mm graded brocken stone aggregate) as in bed to drain pipe including packing under and haunching against the sides of pipes with concrete after they are laid and tested in 150 mm dia pipe complete all as specified and directed.

M & L for cement concrete 1:3:6 type C-1, using 20mm grade stone aggregate as in coping of stone masonry wall, bed blocks and the like including weathering slightly rounded or chamfered and throating as directed including necessary formwork complete all as specified and directed.

Material and labour for Pre cast reinforced cement concrete 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in cover slab of manholes including necessary formwork and set in cement mortar 1:4 complete all as specified and directed.

Material and labour for Plain Cement Concrete (1:2:4) Type B-1 (using 20 mm graded brocken stone aggregate) as in coping including necessary moulds and form work and finished exposed surfaces and channels using extra cement complete all as specified and directed.

M & l for plain Cement concrete Type B-1 1:2:4 (using 20 mm graded stone aggregate) as in surface channels and drains

M&L for cement concrete 100mm thick, 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and paving etc complete all as specified & directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete etc, complete all as specified and directed.

M&L for reinforced cement concrete (design mix) RMC M-30 (using 20mm graded stone aggregate) for foundations, including rafts, footings, foundation beams, plinth beams, bases for column etc and mass concrete, complete all as specified and directed.

M&L for reinforced cement concrete (design mix) RMC M-30 (using 20mm graded stone aggregate) for walls, retaining walls, basement walls and the like, any thickness, above top of footings, including attached pilasters and buttresses, complete all as specified and directed.

M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces using CM 1:4, finished the surface even and smooth all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brickwork or concrete surfaces in CM 1:6, finished the surfaces even & smooth including 1mm thick sagol finish complete all as specified.

M&L for rendering 20mm thick in cement mortar 1:4 on brick or concrete surfaces, on walls, laid in two layers, 1st layer 15mm thick and finishing layer 5mm thick mixed with integral water proofing compound @3 % by weight of cement content of finishing layer, finished fair and even without using extra cement , additional thickness provided as floating/setting coat, including all necessary scaffolding / staging as required complete all as specified and as directed by the Engineer-in-charge at any position :

M & L for rendering 10 mm thick in cement mortar 1:4 on fair faces or brickwork or concrete surfaces to receive wall tiling all as specified and directed

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade mixed with greay cement and pigment.

M & L for sand filling under floors or in foundations incl watering and consolidation complete all as specifed and directed.

M & L for RCC NP2 150mm internal diameter laid in trenches and jointed complete all as specified and directed.

Supply and fix Mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape as in reinforcements and biding with and including mild steel wire not less than 0.9mm (annealed) complete all as specified and directed .

M & L for TMT bars of Fe-500 D grade conforming to IS: 1786, 10 mm dia & over, including cutting to length, bent to shape required, cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc.

Add or deduct for each 25 mm girth or part thereof over or under 30 cm -ditto-

M & L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams , side and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, for rough finished surfaces of concrete, complete all as specified and directed.

M&L for formwork to faces of walls, retaining wall, abutments, parapets and staircase railing and similar work including attched pillasters, buttresses etc, vertical or to batter, for fair finished surfaces of the concrete, complete all as specified and directed.

S&F 110mm outer dia, HDPE pipes (PE-63 grade), Class 3, 06 Kgf / Sqcm, in any length, laid through weep holes in the masonary wall, complete all as specified and directed.

M&L Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level

M&L for walling or random rubble,uncoursed well bounded bedded and solidly hearted, built in cement mortar 1:6. (Except stone) Complete all as specified and directed by Engineer-In-Charge.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan n.exceeding 6m mean radius built in CM 1:4 all as specified.

M & L for preparation of new plastered surfaces incl necessary scaffolding and applying two coats of acrylic exterior paint over a coat of primer complete all as specified

M & L for preparation of old plastered surfaces incl necessary scaffolding and applying two coats of acrylic exterior paint over a coat of primer complete all as specified

S & F Aluminium anodised frame for partition, doors, windows, ventilators with powder coating ( minimum thickness of powder coating 50 micron), with one or more rebates including joining cleat for fixing etc. complete all as specified

Supply and fix 4mm thick figured glass, pin headed type glass ordinary quality fixed in aluminium ventilator all as specified and as directed

S & F aluminium anodised grill DG-104 (10 x 5.2 mm thick) of Deco Grill or equivalent fixed with 'F' section approved make all as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with Square tube, supply and fixing in opening as per specification given under SSR Part II 2010 including making good the disturbed surface all as specified and directed. Make: SYNTEX/SHALIMAR/RAJSHRI

M&L for factory made solid PVC panel type PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent supplying and fixing in the frame at site as per specifications and drawing given under SSR Part II 2010 complete all as specified and directed. Make : SYNTEX/SHALIMAR/RAJSHRI

S&F extruded aluminum alloy handles (100mm ) fabricated type anodised complete all as specified Make :- Shalimar / jyoti/ Classic/ Ashoka

S&F hinges (100 mm) stainless steel medium weight complete all as specified

M & L for screedbed or bedding layer of mortar in CM 1:6 , 20 mm thick, for laying floor finishes

S& F glazed ceramic tiles 300 x 200 x 6 to 7mm thick in dado/ skirting set and jointed in neat cement slurry and pointed in coloured cement to match complete all as directed .

S&F non skid ceramic tiles ( 300 x 300 x 6 to 7mm) thick in floor etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as directed

S&F aluminum anodised barrel tower bolts (150 mm ) of extruded section complete all as specified

S&F 15mm dia bore GI steel tubing medium grade including fixing of all fittings laid on floor or fixed on wall complete all as specified and as directed

S&F 15mm bore bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.

S&F 15mm bore stop valve cast copper alloy screwed high pressure with crutch or butterfly handle, screwed both end for iron pipe or for union complete all as specified & directed

S & F 10 litres PVC valveless, syphonic action type, flushing cistern, high level, with inlet, ball valve, float, chain and pull, and brackets, complete all as specified

Supply only integral water proofing compound

M & L for machine cut cudappah stone slab as in window cills and jambs 20 mm thick to full thickness of wall fixed in steps over cement screed bed 20mm thick in CM 1:4 and jointed with grey cement paste and slurry including rubbing and polishing complete all as specified and directed

M&L Grating doom 100mm dia of PTMT (Minimum weight 25gms) in repairs

S & F Wash down water closet (Pedestal pattern), complete white (excluding fixing bolts, flushing cisterns and flush pipe) complete all as specified and directed by EIC.

S & F PVC connections 15mm size with PTMT nuts of length 450mm

S&F cast iron Nahani trap 100mm dia out let including grating connecting jointing to waste pipe with lead jointing and taking out existing unserviceable traps by hacking out concrete joints and making good of surfaces complete all as specified and as directed .

S & F vitreous china urinals bowl type (back or corner wall type) complete including providing and fixing plugs bedding urinal against wall in cement mortar 12 securing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement fixing automatically flushing cistern with brackets flush pipe etc complete all as specified and directed

S & F rolled mild steel in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam,tee, angle, channel or flat sections)incl distance pieces, cleats, etc conforming to grade Fe-410W-(Gde E-250 Quality A).

S & F Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile stength of 550Mpa as in roof coverings/cladding to wall, fixed with self tapping screws as specified.

M & L for preparation of New steel surfaces of any description, not otherwise described over 10cm width or girth applying two coat of synthetic enamel paint over one coat of red oxide, zinc chrome primer complete all as specified and directed.

S & F wash basin vitreous china (flat back or angle back type) only any including cutting for pinning in ends of brackets or erecting stand including of fixing of supply and waste pipe. Complete all as specified

S & F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. Complete all as specified Note : A sum of Rs 4,536.00 towards sch of credit shall be deducted to arrive the contract sum.

Anjali Constructions

RAJU AND COMPANY

H R ENGINEERS