Package No. APART/NOCP/DICC/GLP-01

Amount

Civil Works Dismantling all types of Corrugated / Trapezoidal sheet roofing including ridges, hips, valleys and gutters etc. and stacking the materials as directed by the department for all levels.

Dismantling wood work in frames, trusses, purlins and rafters including stacking the materials as directed by the department for all levels.

Dismantling all types of ceiling, partition and wall lining and stacking the materials as directed by the department for all levels

Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels. Area of door/window above 3.00 m2

Demolishing the reinforcement cement concrete work including stacking of steel bars and disposal of unserviceable material as directed for all levels

Demolishing skirting / Dado in walls / R.C.C & P.C.C mambers without causing damage to walls / member upto any height including disposal of debris as directed for all levels

Demolishing the plastering from walls / R.C.C & P.C.C mambers without causing any damage to the walls / member upto any height including disposal of debris as directed for all levels

Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels

Demolishing CC floor of various thickness including top layer and base course and disposal of debris as directed for all levels.

Earth work in excavation for foundation for trenches of walls, retaining walls, footing of column, steps, septic tank etc. including refilling. Upto a depth of 2.00m below the existing ground level. In Ordinary Soil

Providing brick soling in foundation and under floor with stone / best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materialsand if necessary dewatering complete. Brick on flat soiling

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing, steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete , In proportion 1 Cement : 3 Sand : 6 Coarse agg. by volume

Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code for R.C.C works / R.B walling including straightening, cleaning, cutting and berding to proper shapes and length as per details supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. From primary producer TATA/SAIL/Jindal steel/ Shyam steel / RINL, Super Ductile (SD) TMT reinforcement bar., 10mm dia bar, 8mm dia bar, 6mm dia bar

Providing and laying plain / reinforced cement concrete works cement, coarse sand and 20mm down graded stone aggregate including dewatering if necessary and curing complete but excluding cost of form work and reinfor cement for reinforce cement concrete work ( form work and rainforcement will be measured and paid separatly) Using and Mixture Machine, In substructure upto plinth level, Foundation, footing, columns with base, tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other work not less then 100mm thick upto plinth level, Without Using admixture plasticiser, M15 grade concrete or proportion 1 :2 :4

Providing and laying plain / reinforced cement concrete works cement, coarse sand and 20mm down graded stone aggregate including dewatering if necessary and curing complete but excluding cost of form work and reinfor cement for reinforce cement concrete work ( form work and rainforcement will be measured and paid separatly) Using and Mixture Machine. In Superstructure from plinth level upto 1st floor level. walls (thickness not less then 100mm) including attached pillarsters, buttresses, plinth and string course etc. Without Using admixture, Plasticiser M15 grade concrete or proportion 1 :2 :4

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc height of propping and centering below supporting floor to ceiling not exceeding 4.0 mtr. amd removel of the same for in-situ reinforce concrete and plain concrete work. Foundation, footings, bases of columns, pile cap raft and mass concrete works etc. Using 25mm thick plank

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc height of propping and centering below supporting floor to ceiling not exceeding 4.0 mtr. amd removel of the same for in-situ reinforce concrete and plain concrete work. Columns, Pillars, Posts and Struts. Square, Rectangular, Polygonal in plan or any shape like Tee/L etc. having plane vertical face, Using 25mm thick plank

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc height of propping and centering below supporting floor to ceiling not exceeding 4.0 mtr. amd removel of the same for in-situ reinforce concrete and plain concrete work. Flats surfaces such as soffits of suspended floors, roofs, landings, cantilevers slabs, chajjas, balconies and the like, Floors upto 200mm thickness Using 25mm thick plank

Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed. In Sub-structure upto plinth level including dewatering if necessary. In proportion 1 : 4

Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed. In Super-structure above plinth level upto 1st floor level. In proportion 1 : 4

Providing corrugated Galvanized iron sheet roofing of TATA SHAKTEE / SAIL / JSW Steel including fitting and fixing necessary galvenised J or L hooks, bolts and nuts 8mm dia with bitumin washer 25mm dia X 3mm thick and 1.6mm thick limpet washer complete excluding cost of roof truss, purlin etc. (Roof trusses, purlins etc. to be measured and paid separately) 0.60mm thick

Providing Galvanized iron ridging of TATA SHAKTEE / SAIL including supplying and fixing necessary galvd screws / washers etc. complete as directed. 0.60mm thick, 230 mm lapping

Providing undressed wood work in roof truss, rafter, parlin, tie and the like including hoisting fixing in position with necessary spikes, nails including M.S straps with bolt and nuts etc. complete with kiricide oiling two coats to all tember members and two coats of anticorrosive paint to M.S straps (M.S flat, angle cleats and bolt and nuts required for flat and angle cleats wherever used shall be measured and paid separtely). With Sal Wood

Providing wood work in frame (Chowkaths) of doors winndows, clerestory windows and other similar works rought, framed and fixed in position in contact with C.C or brick masonary walls including supplying fitting and fixing with M.S hold fast (40mm X 3mm X 250mm) as per design embaded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling in the tember faces in contact with C.C and masonary as directed and specified. With Sal Wood

Providing, fitting and fixing 1st class local wood, battened, framed and braced door and window shutters including oxidised iron butt hinges (100mm X 58mm X 1.90mm) 6 nos. with necessary screws. Using Gamaring Wood

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall / partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mm X 10mm X 0.55mm thick fixed to soffit with G.I cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally , the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc. cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary.) 12.5mm thick

Providing Barge Board of size 200mm X 20mm with 1st class local Hollock / Bonsum timber including fitting and fixing necessary wood screws etc. complete

Cement plaster skirting with cement moter in prop. 1: 3 , cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junction with floor, 20mm thick

15mm thick cement plaster in single coat on single or half brick wall for interior plastering upto 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even smooth including curing, complete as directed , On rough side In cement morter 1 : 4

Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from morter droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Finishing wall water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials.

Supplying, fitting, fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edge, and corness, flaws and other defects and with counter sunk holesfor screws including necessary aluminium screws etc. complete. ( Anodised to bright natural matt & satin finished) Sliding door bolts, 300mm X 16mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edge, and corness, flaws and other defects and with counter sunk holesfor screws including necessary aluminium screws etc. complete. ( Anodised to bright natural matt & satin finished) Tower bolts, 250mm x 12mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edge, and corness, flaws and other defects and with counter sunk holesfor screws including necessary aluminium screws etc. complete. ( Anodised to bright natural matt & satin finished) Door Handles, 150mm

Plain cement concrete appron in Proportion 1 : 4 : 8 with 20mm down graded coarse aggregate over soling including net cement finish using cement slurry 2.75Kg of cement per Sqm. of floor (soling to be measured separately) 50mm thick

Plain cement concrete floor base in Proportion 1 :3 :6 laid in alternate bays as specified with coarse aggregate of size 13mm to 32mm including dewatering if necessary and curing etc. complete. 50mm thick

Providing ceramic Tiles of approved quality, size, shape and thickness not less than 8mm on floors, skirting, treads and risers of steps over cement morter bed 15mm thick in proportion 1 : 3 ( 1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix - A - Tile Choksey / Sika / Pedelite / Rouf / White Cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). Delux range ( Somany / Orient / Nitco / Qutone Make ) Of size 600mm X 600mm and above

Providing ceramic wall Tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement morter bed 10mm thick in proportion 1 : 3 ( 1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix - A - Tile Choksey / Sika / Pedelite / Rouf / White Cement slurry) mixed with approved pigment to match the shade of tiles complete at all levels as specified and directed (Cement plastering to be measured and paid sepeartly) (coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and extrior walls) Normal range ( Somany / Orient / Nitco / Asain Make ) Of size 200mm X 300mm and above

Providing plinth protection with bricks flat laid in cement morter 1 : 4 and finished with 15mm thick cement plaster in proportion 1 : 2 with a floating coat of neat cement finish

Providing drain with brick work in cement morter in proportion 1 : 5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soiling including 15mm thick cement plastering in prop. 1 : 3 finished with a floating coat of cement slurry as directed with necessary shuttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm

Applying priming coat over new wood and wood based surfaces over 100mm in girth / width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. With ready mixed paint, wood primer (Pink)

Painting two coats excluding priming coat on new wood and wood surface with enamel paint of approved brand and manufacture (Asian paint / Berger paint / ICI paint / J & N paint / Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter, sand papering and stopping. Surfaces over 100mm in width or girth, General purpose (Asian Paint / Berger paint / ICI paint / J & N paint / Nerolac)

STEEL RAILING : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i.e fixing the railing with necessary accessoriess & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in-charge. (For payment, only weight of stainless steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered.) 33.70mm Dia Pipe

Providing Antiskid Tiles of approved quality, size, shape and thickness not less than 8mm on floors, skirting over a cement morter bed of 15mm thick in proportion 1 : 3 ( 1 cement : 3 coarse sand ) approved make fixed with Fix - A - Tile ( Choksey / Sika / Pedelite / Rouf ) / White Cement complete at all levels as specified and directed. CERAMIC, Normal Range ( size 300mm X 300mm and above ) Orient made : Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate For Ramp

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.

Extra over item No. 43 above for removing dry or oil bound distemper on ceiling and in slopeing roof

Providing surface preparation for walls, celling etc. using average 1.50mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary with chalk powder and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed.

Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surface free from morter dropping and other foreign matter and including prepearing the surface even and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of of approved brand and manufacture (Asain paint / Berger Paint / ICI Paint / J & N Paint / Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from morter droppings and other foreign matter and sand papered smooth. Plastic Emulsion paint of approved brand and manufacture (Asain paint / Berger Paint / ICI Paint / J & N Paint / Nerolac)

Painting one coats on old GCI Sheets with ready mix anticorrosive paint approved brand and shade suitable for painting over GCI Sheets to give an even shade including the cleaning the rust patches with emery paper, dirt, dust, grease and other foreign matter with water complete.

Extra over item No 48 for every subsequent coat of paint

Applying mordent solution of approved brand and manufacture on new CI Sheets for preparation of surfaces for painting @ 5.00 Ltr./100 Sqm. of surface and rubbing the solution with brush including throughly cleaning the surface of oil grease,dirt and other foreign matter.

Painting two coats on new GCI Sheets with ready mix anticorrosive paint of approved brand and shade suitable for painting over GCI Sheets to give an even shade including the cleaning the rust patches with emery paper, dirt, dust, grease and other foreign matter with water complete.

Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS : 2171 with ISI mark and CO2 cartridge will be confirming to IS : 4947 with ISI mark, powder will be confirming to IS : 4308 with ISI Mark (10Kg) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS : 2878 with ISI mark (Extinguisher will be TROLLEY MOUNTED) (9 Kg) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Construction of L - shaped work station including supplying and making having a table of top size 150mm(W) X 600mm(D) X 750mm(H) in one direction and 1800mm(W) X 600mm(W) X 750mm(H) in other direction including providing 3Nos. Of drawers and providing partition of soft board at one side made of 19mm thick marine grade block and 12mm thick marine grade ply-board of Greenlam / equivalent make and finishing by providing 1mm thick Merino / Greenlam equivalent laminated including including all necessary accessories like screws, nails, adhesive, paper - tap, draw-lock drawer handle etc. complete as directed and specified

Supplying and placing of Godrej High Back Chair (Godrej Model)

Supplying and placing of GODREJ VISITOR CHAIR ARMES (Godrej Model)

Sanitary fittings Providing ,fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors wherever required (Flushing cistern to be paid seperately) Indian type W.C Orissa pattern of size 580mm x440 mm Jaquar make

Supplying ,fitting and fixing PVC flushing cistern with all internal fittings with C.I brackets including fitting and fixing standard size CP flush pipe, union clamps etc. complete as directed and specified Parry ware make, White, Delux Dual Flush (Cat No. C8110)

Providing fitting and fixing vitreous china flat back typed lipped front urinal basin of with automatic flushing cistern with standard flush pipe and C.P brass spreader and brass unions etc. complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. Parry ware make , White, Integrated EFC-AC with power source (Cat No. C 8097) / Integrated EFC-DC (Cat No. C 8098)

Providing fitting and fixing vitreous china squatting plate urinal with automatic flushing cistern with standard flush pipe and C.P brass spreader andbrass unions etc. complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. Parryware make, White (Cat No. C0503)

Providing vitreous china wash basin with C.I / M.S brackets, C.P brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, wast coupling are to be paid seperately) PEDESTAL BASIN (with pedestal), Parry ware make, White, Vanice 620 X 485 X 850 (Cat No. C 841 P/R) (White / Coloured)

Providing, fitting and fixing Soap tray / Soap dish Complete as directed and specified, Jaquare Make ,Queen's (Cat No. AQN - 7731)

Providing, fitting and fixing chrome plated waste coupling as directed and specified, Jaquare Make, 32mm (HT / FT) (Cat No. ALD - 705 / 709)

Supplying, fitting and fixing PVC pipes of 6Kg/Sqm (Supreme / Prince) or other ISI approved including joining, fitting and fixing with clamps etc. as necessary complete at all levels including below G.L as directed and specified a) In exposed surfaces or in trenches, 110 mm dia

Supplying, fitting and fixing PVC pipes of 6Kg/Sqm (Supreme / Prince) or other ISI approved including joining, fitting and fixing with clamps etc. as necessary complete at all levels including below G.L as directed and specified a) In exposed surfaces or in trenches, 63mm dia

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified, In exposed surfaces or in trenches, 110 mm dia

Supplying, fitting and fixing PVC plain single tee of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified, In exposed surfaces or in trenches , 110 mm dia

Supplying, fitting and fixing PVC sing 'Y' of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified. In exposed surfaces or in trenches, 110 mm dia

Supplying, fitting and fixing PVC coupler of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified In exposed surfaces or in trenches, 110 mm dia

Supplying, fitting and fixing PVC reducer of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified, In exposed surfaces or in trenches, 110 mm X 63mm

Supplying, fitting and fixing PVC Socket plug of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified, 110 mm dia

Providing, fitting and fixing PVC Cowel of ISI make complete as directed and specified, 63mm dia PVC Cowel of ISI make

Providing, fitting and fixing C.I Grating to the floors complete as directed and specified, 110 mm dia

Construction of inspection pit inside measurement 450mm X 450mm X 450mm flush with 100mm diameter base in proportion 1 :3 :6 over flat brick soling 12cm brick wall in cement mortar in proportion 1 : 4 finished with 13mm cement plaster in proportion 1 : 2 in side wall and floor 450mm X 450mm air tight C.I inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed.

Clearance of service septic tank and removing the night soil and debris etc. manually from the tank / chamber to a distant place preferably during holidays or at night by bailing out the deposited night soil, buring the same in near by trenches / pits which has been dug earlier and covering the same . The service septic tank is cleaned with clear water and completed as directed by the Department. For 50 users.

Electrical Works Wiring for light / fan / call bell point with 2 X 1.5 Sq mm PVC insulated core unsheathed industrial (Multistrand) cable FR conforming to IS-694 : 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent Make as approved by the Deptt.) with flat 19mm ISI marked casing 'n' capping (AKG / Precision / Presto Plast / Polycab / MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch / bell push (Anchor Penta / Gold medal / Kolor kany.kom / Havells or equivalent make as approved by the Deptt.) GI / MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover, ceiling rose (Anchor / Gold medal / Kolor Kany.kom / Havells or equivalent make as approved by the Deptt.) etc. complete as directed and specified by the Deptt. Short point up to 3.00 metre. length

Wiring for light / fan / call bell point with 2 X 1.5 Sq mm PVC insulated core unsheathed industrial (Multistrand) cable FR conforming to IS-694 : 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent Make as approved by the Deptt.) with flat 19mm ISI marked casing 'n' capping (AKG / Precision / Presto Plast / Polycab / MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch / bell push (Anchor Penta / Gold medal / Kolor kany.kom / Havells or equivalent make as approved by the Deptt.) GI / MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover, ceiling rose (Anchor / Gold medal / Kolor Kany.kom / Havells or equivalent make as approved by the Deptt.) etc. complete as directed and specified by the Deptt. Medium point up to 6.00 metre. Length

Wiring for light / fan / call bell point with 2 X 1.5 Sq mm PVC insulated core unsheathed industrial (Multistrand) cable FR conforming to IS-694 : 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent Make as approved by the Deptt.) with flat 19mm ISI marked casing 'n' capping (AKG / Precision / Presto Plast / Polycab / MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch / bell push (Anchor Penta / Gold medal / Kolor kany.kom / Havells or equivalent make as approved by the Deptt.) GI / MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover, ceiling rose (Anchor / Gold medal / Kolor Kany.kom / Havells or equivalent make as approved by the Deptt.) etc. complete as directed and specified by the Deptt. Long point up to 10.00 metre. Length

Wiring to 5 a pin 6 Amps plug point with 1.5 Sq mm PVC insulated core unsheathed industrial (Multistrand) cable FR conforming to IS-694 : 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent Make as approved by the Deptt.) with flat 19mm ISI marked casing 'n' capping (AKG / Precision / Presto Plast / Polycab / MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor Penta / Gold medal / Kolor kany.kom / Havells or equivalent make as approved by the Deptt.) GI / MS switch board (ISI marked) with phenolic laminated sheet cover including earth continuity with 1.5 Sq. mm cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Midium point up to 6.00 metre. length

Wiring to 5 a pin 6 Amps plug point with 1.5 Sq mm PVC insulated core unsheathed industrial (Multistrand) cable FR conforming to IS-694 : 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent Make as approved by the Deptt.) with flat 19mm ISI marked casing 'n' capping (AKG / Precision / Presto Plast / Polycab / MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor Penta / Gold medal / Kolor kany.kom / Havells or equivalent make as approved by the Deptt.) GI / MS switch board (ISI marked) with phenolic laminated sheet cover including earth continuity with 1.5 Sq. mm cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Long point up to 10.00 metre. Length

Wiring for 5 pin 6 Amps plug with 1.5 Sq mm PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694 : 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent Make as approved by the Deptt.) including providing & fixing 5 pin 6 Amps socket outlet (Anchor Penta / Gold medal / Kolor kany.kom / Havells or equivalent make as approved by the Deptt.) and 6 Amp flush type switch (Anchor Penta / Gold medal / Kolor kany.kom / Havells or equivalent make as approved by the Deptt.) earting the 3rd pin of the socket as required on the swicth board ISI marked casing 'n' caping system, when fitted on same board of light and fan.

Wiring for drawing Sub-main line with 2 X 1.5 Sqmm PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694 : 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent Make as approved by the Deptt.) in surface flat 19mm ISI marked casing 'n' caping (AKG / Precision / Presto Plast / Polycab / MW or equivalent make as approved by the Deptt.) system including connection as required complete as directed and specified by the Deptt. 1.7.1 with 2 X 1.5 Sq. mm cable in flat 19mm ISI marked casing 'n' capping system )

Wiring for drawing Sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694 : 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' caping (AKG / Precision / Presto Plast / Polycab / MW or equivalent make as approved by the Deptt.) system including earth continuity with 2 X 2.5 Sq. mm + earth continuity with 1 X 1.5 Sq.mm in flat 19mm ISI marked casing 'n' capping system

Wiring for drawing Sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694 : 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' caping (AKG / Precision / Presto Plast / Polycab / MW or equivalent make as approved by the Deptt.) system including earth continuity with 2 X 4 Sq. mm + earth continuity with 1 X 2.5 Sq.mm cable in flat 19mm ISI marked casing 'n' capping system

Wiring for drawing Sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694 : 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' caping (AKG / Precision / Presto Plast / Polycab / MW or equivalent make as approved by the Deptt.) system including earth continuity with 2 X 6 Sq. mm + earth continuity with 1 X 4 Sq.mm in flat 25mm ISI marked casing 'n' capping system

Wiring for drawing Sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694 : 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' caping (AKG / Precision / Presto Plast / Polycab / MW or equivalent make as approved by the Deptt.) system including earth continuity 1.10.4 with 4 X 16 Sq. mm + earth continuity with 2 X 10 Sq.mm cable in flat 32mm ISI marked casing 'n' capping system

Supllying and fixing of batten holder (Anchor Penta PC CHERRY / Gold medal / Kolor Kany. kom / Havells or equivalant make as approved by the Department) including connection as approved by the department as required (Without Lamp)

Supllying installation, testing and commissioning of the LED Lamp as directed by the Deptt. PHILIPS LED bulb none dimmable 7 Watt or equvalent as approved by the deptt.

Supllying installation, testing and commissioning of the following indoor recessed mounted LED Lamp luminous complete with all accessories such as driver etc. in the folse ceiling type Armstrong / Gypsum or similar ceiling mounted with necessary souport and connection with 1.5 Sq.mm PVC insulated S.C copper conductor as required and as directed by the Deptt. 5.2 PHILIPS lighting luminaire 39 Watt green square model RC140B LED 298-6500 PSE WH / RC140B LED 285-4000 PSE WH 220-240V or equivalent as approved by the deptt.

Supllying and fixing of call bell (Buzzer) including 5/6 amp capacity button piano type bell push switch including connection as approved by the deptt. as required

Providing and fixing of 16/0.20 mm twin twisted flexible cotton braided cable in polythene pipe of suitable size on the floor / wall or side of the table / door as required

Supplying and fixing of 250/305mm dia (Nominal size) flush type circular celing fittings complete with holder, Aluminium anodized back plate and brass holder, 20 Watt CFL Lamp including connection as approved by the deptt. as required

Supplying including fitting and fixing following AC ceiling Fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connections as approved by the department as required complete and as directed by the Department (Without reulator) Premium model 1400mm sweep (Orient PSPO make) / Premium model 1400mm sweep SS-390 Deco (Havells make)

Supplying fitting and fixing of ceiling Fan regulator including connection etc. complete as required Electronic type

Supplying with fitting and fixing sheet steel, Phosphatised, powder painted single door surface mounting MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc. fitted on wall with grouting nuts & bolts as required complete with making necessary connection as approved, Specified and directed by the Department. 6 way SPN single door

Supplying with fitting and fixing sheet steel, Phosphatised, powder painted single door surface mounting MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc. fitted on wall with grouting nuts & bolts as required complete with making necessary connection as approved, Specified and directed by the Department. 12 way SPN single door

Supplying with fitting and fixing single pole 10 KA 240 / 415 V 50Hz MCB of the following capacity complete with making necessary connection as approved, Specified and directed by the Department. 16.30.2 C Series (Schneider neo break, C & S, Havells, V-Guard or equivalent make as approved by the deptt.) 6 to 32A

Supplying with fitting and fixing DP 10 KA 240 / 415 V 5Hz MCB of the following capacity complete with making necessary connection as approved, Specified and directed by the Department. C series ( Schneider neo break, C & S, Havells, V-Guard or equivalent make as approved by the deptt.) 6 to 32 A

Supplying with fitting and fixing 4P 10 KA 240 / 415 V 5Hz MCB of the following capacity complete with making necessary connection as approved, Specified and directed by the Department. C series ( Schneider neo break, C & S, Havells, V-Guard or equivalent make as approved by the deptt.) 63 A

Supply, installation & testing of copper plate earth station with 600mm X 600mm X 3mm copper earth plate with necessary 40mm dia G.I medium duty watering pipe with G.I fittings such as socket, tee, elbow, nipple and 50mm X 40mm G.I reducing socket for funnel including locking arrangement with 300mm X 300mm X 6 mm C.I hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner and outer surface of wall as specified and directed by the department.

Extra for using solt 5Kg and Charcoal 96Kg in G.I / copper plate earth station pit to provide low impedance ground in location of high soil resistivity as and when required and specified and by the department.

Supplying and laying of 8 SWG copper earth from earth electrode (below G.L) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the department.

Philips 35 W uniflood integral flood light with driver inside a PDC housing highly efficient reliable and sturdy Model BVP 120 LED 35 CW FG S1 PSU GR or equivalent as approved by the department.

Supplying including fitting and fixing bus bar chamber (HLP /GECO / or equivalent make) with 4 strips bus bar of length 350/450/600/900 mm made of aluminium alloy or wrought aluminium suitable for 100 amp capacity complete with all accessories including connection etc. as required complete.

KARUN KUMAR DAS

Jayanta Kumar Choudhury