REPAIR REPLACEMENT TO ROOF SHEET ROLLING SHUTTER SLIDING DOOR AND CONNECTED B AND R ITEMS UNDER THE AOR OF AGE B AND R ONE OF GE NORTH DLEHI CANTT 10

Amount

S&F Rough cast,wired Fibre glass sheet exc 6mm thick but n.exc 10 mm thick fixed with flat iron and nut bolts in squre/rectangle & as required exc 0.75sqm but n.exc 1.00sqm in each pane fixed with necessary securing arragement as previous at height upto 15m incl Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane including Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete(steel or wooden metal) all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided.

Dismantling timber scantlings 40 sq. cm and over in section, in frame work at any position complete all as specified and directed.

Ditto- in fillets, rails, posts, rafters, purlins as in framed work etc. Under 40 sq cm in section.

S&F Structural steel work for rolled sections as in main and cross beams,hips,jacks, rafters, purlins,runnings , rails and guides for sliding doors fixed with angles, cleats or other conneccting plates grade FE-410-W at working height 15m incl application of two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, exc 10 Cms in width or girth, including preparation of surfaces up to ht of 15.00 m, complete all as specified and directed.

Dismantling of AC sheet (corrugated/semi corrugated etc) in roof or wall of any description including false ceiling of any type below roof sheet etc at height upto 15 metres complete all as specified and directed.

Dismantling of Plain or corrugated steel/ fibre sheeting of any guage as in roof covering including ridges/gutters etc of any description straight or curved at height upto 15 mtr complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store .

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thk of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as in roof up to 15 m ht complete all as spd .

S&F Fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc up to 15 m ht, complete all as spd .

S&F 0.50mm plain, Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet galvanised,mild steel sheeting, in ridges, hips, valley gutter, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 and welded or soldered joints are provided as requried up to 15 m ht, complete all as specified and directed.

S&F 2mm thick PGI sheet having 120gm/sqm of zink coating per sqm both sides in valley gutter, dripper,or as rain water pipe, straight flashing with 100mm overlap made to required shape & size incl welding or revetting and fixed in position and working height upto 15m complete all as specified and directed.

S&F steel rolling shutters, gear operated type with bevel gear box and crank, shaft and handle, ball bearing, helical spring, as specified including top covers, anchoring rod, hasp & staple errected in position make it functional complete thickness of laths 1.25mm including taking down of old existing, complete all as specified and directed.

Taking down and refixing in same position existing unserviceale rolling shutters with gear or without gear, any type area of each shutter exc 10 sqm and n.exc 27 sqm, including cleaning, greasing, make it functional after repair, change all unserviceable fitting and fixture and unserviceable parts, complete all as specified and directed. Note :(Fitting and fixtures to paid separately as supply only,

S&F safety lever locks mild steel with 4 levers for rolling shutters

Supply only mild steel helical wire spring 45 to 75 cm long and 75 to 100 mm dia and weighting of each spring not less than 3.00 kg complete all as specified and directed

Supply Only for ball bearing for rolling shutters make as approved all as specified and directed.

Supply only Steel wheel sutaible for sliding steel door shutters on top or bottom rail including bush or ball bearing and all consumable items for making operational complete

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand brushing scrubing down concrete surfaces with wire brushes cleaning with water allowed to dry applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of a layer of epoxy adehessive on complete exposed surfaces of concrete and provide guniting in two layers over steel welded mesh 2 mm dia of wire and total aperture 75 mm, thickness of gunite n.exc 25 mm thick (average thickness) using cement mortar 1 :3 with OPC 43 grade cement mixed with polycrete admixture @ 2 % by wight of cement or as per manufactures instructions and finally applying cement plaster over gunite surfaces of required thickness to give an even uniform and smooth finish conforming to proper Geometrics in cement mortar 1:4 to match with the existing surface as in side and soffits of slabs,chajjas,fins,facias ,parapets ,columns and beams etc complete including necessary scaffolding ,shuttering necessary chased to brick work or RCC members at any height upto four storey buildings incl removing of small trees shrubs etc all as specified(Note: steel welded mesh to be welded with the existing reinforcement. The cost of welded meshis to be welded with the existing re-inforcement is deemed to be included in the quoted rate complete all as specified and directed.

Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:4) incl Dismantling of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles up to 15 mtr height complete all as specified.

M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on new brick work or concrete surface of wall (internal surfaces) finished even and smooth up to 15 mtr height incl two coat of Oil Bound Distemper over 1mm thick putty wall care putty complete all as specified and as directed.

M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on new brick work or concrete surface of wall (Exteernal surfaces) finished even and smooth up to 15 mtr height incl application of two coats of cement base paint over a coat of primer,complete all as specified and as directed

M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (internal surfaces) finished even and smooth including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots up to 15 mtr height incl two coat of Oil Bound Distemper over 1 mm thick putty wall care putty complete all as specified and as directed.

M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (Exteernal surfaces) finished even and smooth including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots up to 15 mtr height incl application of two coats of cement base paint over a coat of primer,complete all as specified and as directed

M&L 5mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on ceilling surfaces finished even and smooth including Taking down cement or cement lime plaster, on ceiling sufface including raking out joints, hacking for key, scrubbing down with water etc incl application of three coats of white wash complete all as specified and directed

M&L providing 1:2:4 type B-0 (12.5 mm graded aggregates) cement concrete in roof kerbs or mud stops, rounded or chamfered on edges and other similar works as coping, roof padding etc

S&F Expanded metal mesh, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia (weight n. exc. 4.00 kg/sqm) or fixing with galvanised steel staples supplied and fixed complete to wood or steel members at height up to 15 metres incl application of two coat of synthetic enamel paint over a coat of red oxide incl dismantling of old mesh of any discription complete all as specified and directed).

S&F with complete installation of wind operator turbo air ventilator of size 600mm dia made of stain less steel sheet including dual ball bearing fixed over assembly made of polycarbonate transparent sheet of size 5.5 x 3.5 feet on roof of steel structure shed working height up to 15 meter complete all as specified and directed.

S&F for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick or 600x600x4 mm thick E bord of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light incl dismantling of old false ceiling of nay discription at as specified and directed.

S&F powder coated aluminium frame partition with frame of standard anodised aluminum section, of size 101.60 mm X 44.45mmX2mm,in vertical and horizonal members and glazed with5mm thick tinted prelaminated partical board interior grade both side laminated or plain glass including joining cleats, glazing pins, rubber packing including dismantling of old partition complete all as specified and directed.

Removing foriegen materials i.e silt, sludge, soil from Valley Gutters, in any pipe of any dia in any position without disturbing the structure of valley gutter & sheets, working height upto15m and thrown away from MOD land complete all as directed

M&L for one coats of synthetic enamel paint on old/previously treated steel surfaces including preparation of surfaces of any description not otherwise described over 10cm width or grith working height up to 15 meter complete all as specified and directed.

M&L for preparation of old steel surfaces, and applyng one coats of aluminium paint up to 15 m working ht complete all as specified and directed.

M&L for Complete removal of existing treatment and preparing old decorated surfaces of wall and applying two coats of Oil Bound Distemper over one coat of 1mm thick wall care putty up to ht of 15 m complete all as specified and directed by Engineer in charge .

M&L for complete removal of existing treatment of wall including cornice etc and applying two coat of cement base paint of approved shade up to ht of 15 m complete all as specified and directed by Engineer in charge .

M&L for water based premium acrylic smooth exterior emulsion over new/old surfaces of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up Resistance of Asian Paints Ltd or its equivalent with low VOC less than 50 , Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint with 8 years performance warranty from Manufacture and instructions up to ht of 15 m complete all as directed.

SAI SARTHI ENGINEERING & CONSTRUCTION CO. (BID ID -3376857)

M/S SURINDERAS CONSTRUCTION CO. (BID ID -3377312)

QUALITY CONSTRUCTIONS CO (BID ID -3378771)

Gaurav Construction Company (BID ID -3378791)

M/s Birja Nand (BID ID -3377828)