Beautification around Ganesh Mandir Pochhal Kishtwar

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and laying stone in horizoontal level wuth ramming,compacting and watering including cost of stone.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level ThermoMechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre

40 mm thick fine dressed and rubbed stone flooring over 20mm (average) thick base of cement mortar 1:5 (1 cement: 5 coarse sand), with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixture withpigment to match the shade of stone and pointing with the same mortar and curing complete. Red sand stone

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shades, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) Size of tile 600x600 mm

Providing and laying matt finished vitrified tile of specified size having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge.300x300x9.8 mm

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes

Providing and fixing Steel Laser Cut Grill 2mm thick All Leads, lifts. Complete Fixing, painting at site as per direction of engineer in Charge and as per approved design by concerned engineer complete job

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills,facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab over 0.5 sqm)

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 m height, backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1cement: 3 coarse sand) including pointing in white cement mortar 1:2 ( 1 White cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete : (To be secured to the backing by means of cramps which shall be paid for separately): 30mm thick

Providing and fixing cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement: 2 coarse sand) including making the necessary chases in stone and holes in walls wherever required Gunmetal Cramps 25 x 6 mm - 30 cm long

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Raised and cut pointing

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 15 mm dia. nominal bore

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing brass stop cock of approved quality.15 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 15 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.20mm nominal outer dia pipes.

Supply Transportation and installation ornamental garden/park bench (3-seater type) made of decorative cast iron/mild steel frame with armrests and legs, fitted with seasoned hardwood/FRP Slats (25-32mm thick) for seating and backrest, finished with two coats of weatherproof paint/polish over anti-rusting primer, including all stainless-steel fasteners, fixing in position by gruting legs in cement concrete Block (1:2:4) mix of size 200x20x300 nnm complete in all respects including labour, material transport and taxes, as per the direction of engineer in charge Complete job

Supply transportation and installation of outdoor decorative LED lamp ( 12-15W, IP65 on a compound wall pillars, including fixing on pillars wiring with 1.5 sqmm copper wire in 20 mm PVC conduit, junction box, clamps, Termination, labour, testing and commissioning. Includes pro - rata share of control system consisting of distribution enclosure, 6A MCB, timer/photocell automatic switch, acabling, and associate accessories complete in all respect and all incidental charges for ready to use functional lightning. Complete Job

Supplying, installing, testing and commissioning of decorative waterproof LED garland/festoon lights, warm white colour, IP65 protection, operating voltage 220-240V AC, power consumption approx. 7W/m, LED spacing not more than 10 cm, cable colour green/black, complete with male/female couplers, ISI-marked 3-core copper flexible interconnecting cable 1.0 sq mm, weatherproof polycarbonate junction boxes with cable glands and 6A plug top, UV-resistant fixing accessories (cable ties/clips/hooks), including all labour for fixing, alignment, wiring, transportation, loading, unloading, scafffolding/ladders where required, testing of continuity and insulation resistance, and handling over in working condition, all complete as per direction of Engineer in Charge Complete Job

Supplying, installing, testing and commissioning of decorative waterproof LED garland/festoon lights, warm white colour, IP65 protection, operating voltage 220-240V AC, power consumption approx. 7W/m, LED spacing not more than 10 cm, cable colour green/black, complete with male/female couplers, ISI-marked 3-core copper flexible interconnecting cable 1.0 sq mm, weatherproof polycarbonate junction boxes with cable glands and 6A plug top, UV-resistant fixing accessories (cable ties/clips/hooks), including all labour for fixing, alignment, wiring, transportation, loading, unloading, scafffolding/ladders where required, testing of continuity and insulation resistance, and handling over in working condition, all complete as per direction of Engineer in Charge Complete Job

Centering and shuttering including strutting, propping etc. and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Carriage of Sand at an average distance of 30 km by MT & 150m by H/L

Carriage of Bajre at an average distance of 07 km by MT & 150m by H/L

Carriage of Stone at an average distance of 05 km by MT & 150m by H/L

Carriage of Mulba/Earth at an average distance of 5 km by MT & 150m by H/L

Carriage of Bricks at an average distance of 210 km by MT & 150m by H/L