SUPPLY, INSTALLATION, TESTING AND COMISSIONING OF SECURITY EQUIPMENTS AND BAGGAGE HANDLING SYSTEM WORKS AT PASSENGER TERMINAL BUILDING, NEAR COAST GUARD AIR STATION, DAMAN. (3rd call)

Civil works others

Providing and supplying Baggage Handling System: Departure System *Double Check-In Conveyor (Scale & Induction Conveyor)Belt Width: 650 mm, Length: 1200+1200 mm, Finish: Stainless Steel Trims. 2. *Tipping Device-Tippler Bar/Cone (8 Nos.) 3.*Collector Conveyor-Belt Width: 1000 mm, Length: 10,970 mm,Finish: Stainless Steel Trims (01 No.) 4.*Collector Conveyor-Belt Width: 1000 mm, Length: 11,920 mm, Finish: Stainless Steel Trims (01 no.) 5.*Power Curve- Belt Width: 1000 mm, Finish: Stainless Steel Trims (01 no.) 6.*General Transport Conveyor-Belt Width: 1000 mm, Length: 2200 mm, Finish: MS Powder Coated (01 no.) 70. * Gravity Roller Deck-Belt Width: 1000 mm, Length: 2000 mm,Finish: MS Powder Coated Side Panels, Galvanized rollers (01no.) 8.*Fire Shutter Door- Opening Width: To match Conveyor, Opening, Height: Minimum 900 mm, Finish: MS Powder Coated (01 no) 9.*Draught Curtain-Width: 1400 mm, Height: 1200 mm, Strip: 2mm thick PVC, Strip Covering: Stainless Steel (1 no.) 10.*MCP Panel- PLC: Rockwell/Omron/Delta, HMI: Delta/Exor, Other Items as required: Reputed make (01 lot) 11.*Control Stations- As required, Make: Schneider/Reputed (1 lot) 12.*Electrical Field Items- Includes Sensors & Reflectors, Isolators, Beacon & Sounder, etc., Make: Reputed (1 lot) 13.*Cables & Accessories-As required, Make: Reputed (1 lot) 14.*Software-As required (1 job) 15.*SCADA System- Software Make: Exor/Reputed, Hardware Make: HP/Dell/Reputed(1 job)

Providing and supplying Baggage Handling System: Arrival System *Flat Overlapped Carousel- Slat Width: 1000 mm, Length: 37.1 m, Finish: Stainless Steel Trims, Slat: 6 mm thick rubber slat (1 no.) *Fire Shutter Door-Opening Width: To match Conveyor, Opening Height: Minimum 900 mm, Finish: MS Powder Coated (2 no) *Draught Curtain- Width: 1400 mm, Height: 1200 mm, Strip: 2 mm thick PVC, Strip Covering: Stainless Steel (2 no) * MCP Panel-PLC: Rockwell/Omron/Delta, HMI: Exor/Reputed, VFD: ABB/Reputed, Other Items as required: Reputed make (1 lot) *Control Stations- As required, Make: Schneider/Reputed (1 lot) *Electrical Field Items- Includes Sensors & Reflectors, Isolators, Beacon & Sounder, etc., Make: Reputed (1 lot) *Cables & Accessories-As required, Make: LAPP/Polycab/Finolex (1 lot) *Cables & Accessories-As required, Make: LAPP/Polycab/Finolex (1 lot) *Cable Tray &Accessories- As required, Make: Reputed (1 lot) *Software-As required (1 job)

Installation, Testing and Commissioning for both Departure and Arrival Baggage Handling System.

Under Vehicle Scanning System (UVSS):Providing, Supplying, installation, Commisioning and testing of Under Vehicle Scanning System, to enable inspection of any vehicle’s underside through a static composite image of the vehicle, as per the details given below:- The UVSS must be of Indian origin, with regards to its design, development, & manufacturing and the original equipment manufacturer (OEM) should preferably be an Indian, ISO-9001 certified company. The quoted OEM’s UVSS brand should have at least fifty (100) or more such references anywhere within India. A list of such references must be furnished. The UVSS should produce multiple angular view of high resolution 3D COLOR images of the complete under-body of any vehicle passing over it using dual Area-scan camera based technology.The UVSS should be capable of handling vehicles moving at different speeds ranging from Zero (0) to 30 Km/hr, while the morphed composite images so captured by it should be automatically and dynamically adjusted according to the speed of the vehicle using multiple induction loop based sensors.Each of the dual imaging cameras should be of high resolution Area- scan, GigE type with XGA resolution of (1920 x 1200) or above. The minimum specification of this camera to be:- i. Camera Type : Gigabit Ethernet progressive camera. ii. Sensor : CMOS XGA resolution (1920 x 1200) or better. iii. Field of View: > 135. iv. Format : GiGE Vision compliant specifications. v. Composite Image resolution of the underside : 4 megapixel. vi. Camera certification : CE vii. Camera casing ingress protection rating : IP 67 or better, duly certified by NABL accredited lab. The UVSS should be capable of producing a clear and undistorted images of the vehicle underside, even when a vehicle completely stops / halts over the scanning unit, i.e it must be able to produce seamless and perfect composite images of the underside irrespective of stoppage or non-uniform motion of the vehicle over the scanner. The UVSS should not use either a digital Line-Scan camera based technology or any type of analog cameras to form composite image without any distortions or Fish-eye” effect. The UVSS should produce a fully scanned pre-processed ready to use 3D footprint model of the vehicle's undercarriage.The UVSS should produce videos of suspicious objects that are hard to see via single view scanning systems, including visual access to cavities and niches, areas around suspensions, below the engine areas, side wall of fuel tanks & exhaust pipes etc......

K4 Bollards: Providing and supplying of K4 Bollards of Crash Rated (K4) Electro Hydraulic bollard suitable to work on 415V(3-Phase) 50Hz AC supply consisting of internal hydraulic power unit, Each bollard is individually physical tested and K4 certified by accordance certification of BSI PAS 68:2013 & IWA 14-1:2013,Bollard is made of High Tensile Carbon Steel Grade B(ASTM A1006)with sheet nominal thickness of 16-18 mm and having a diameter of 275mm mounted at a minimum height of 1000mm above ground, Rising time - 6 Sec & Lowering in 4 Sec., Impact Resistance 715000 Joule, Operating Temperature -15° C to +60° C, Protection Level IP 67, MCBF -5 Million. (Including Push Button & Remote Control.) Set of 6 Bollards.

Installing, Testing and Commissioning of K4 Bollards of Crash Rated (K4) Electro Hydraulic bollard.

Boom Barrier with Accessories: Providing and supplying of AUTOMATIC ELECTRO-MECHANICAL BOOM BARRIER, 24VDC BRUSHLESS MOTOR, WITH 6 MTR BOOM WITH RUBBER PROTECTION, REVERSE ON CONTACT, OPENING/CLOSING TIME 1.8SEC TO 6SEC, 100% DUTY CYCLE (CE / IP 65) Boom Length 3.5 Mtr Boom Length 6.0 Mtr

Installing, Testing and Commissioning of AUTOMATIC ELECTRO-MECHANICAL BOOM BARRIER. Boom Length 3.5 Mtr, Boom Length 6.0 Mtr.

Tyre Killer: Providing and supplying of Automatic Tyre Killer with required accessories 6.0 mtr length, dia of 25mm, height of 150 mm, width 500mm, spacing between spikes of 100mm with Required Accessories.

Tyre Killer: Providing and supplying of Automatic Tyre Killer with required accessories 3.75 mtr length,dia of 25mm, height of 150 mm, width 500mm, spacing between spikes of 100mm with Required Accessories complete.

Installing, Testing and Commissioning of Automatic Tyre Killer with required accessories 6.0 mtr length.

Providing, Supplying, installation, Commisioning and testing of X-Ray Baggage Inspection System Accessories Included: 1. Input and Output Rollers 500mm Each Side 2. 3KVA Voltage Stabilizer and 3KVA UPS With 30mts Backup 3. CTP and Lockable Control Desk

Providing, Supplying, installation, Commisioning and testing of X-Ray Baggage Inspection System Accessories Included: 1. Input and Output Rollers 1000mm Each Side 2. 3KVA Voltage Stabilizer and 3KVA UPS With 30mts Backup 3.CTP and Lockable Control Desk

Providing, Supplying, installation, Commisioning and testing of Door Frame Metal Detector With Battery & Traffic Light NIJ Standard 0601.02

Providing, Supplying, installation, Commisioning and testing of Hand Held Metal Detector.

Providing, Supplying, installation, Commisioning and testing of Explosive Trace Detector.