Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹20.7 L+₹2.9 L (16.2%)Rejected-Finance RZ F 905 8 RAJ NAGAR II PALAM COLONY NEW DELHI SOUTH WEST DELHI 110077 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110077 | L2 | Rejected-Finance Other than lowest bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
10 Feb 2021, 6:00 pmClosed
GE (N) Bikaner
GE (N) Bikaner Mil Stn Bikaner
CERTAIN REPAIR TO WOODEN FURNITURE UNDER GE (N) AT MIL STN BIKANER
2021_MES_412231_1
GE (N) BKN-Token/52/2020-21
Open Tender
Miscellaneous Works
Item Rate
330 days
GE (N) Bikaner
Class E Category d (i)
8 documents required · 8 mandatory
₹500
Yes
GE(N) Bikaner
₹40,000
Yes
21 Jul 2021
13 Jan 2021
12 Feb 2021
13 Jan 2021
10 Feb 2021
27 Jan 2021
Amount
Table 3’ x 3 ‘ (900 x 900 x760 mm) (FD-291) Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Table top new made of pre laminated particle board (exterior grade ) with teak face one side and other side white of size 900 x 900 x 18mm thick with 04 mm thick half raound teak wood beading shall be provided all round.
(b) Side frame rail.
(c) Legs square & round type.
(d) S&F second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs.
(e) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Table 3’ x 2 ‘ (900 x 600 x760 mm) Without drawer(FD-283) Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Table top new made of pre laminated particle board (exterior grade ) with teak face one side and other side white of size 900 x 600 x 18mm thick with 04 mm thick half raound teak wood beading shall be provided all round.
(b) Long rail
(c) Short rail
(d) Legs square & round type
(e) Short/long stiffeners
(f) S&F second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs.
(g) Drawers complete as per drg
(h) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Table 3’ x 2 ‘ (900 x 600 x760 mm) With drawer(FD-384) Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Table top new made of pre laminated particle board (exterior grade ) with teak face one side and other side white of size 900 x 600 x 18mm thick with 04 mm thick half raound teak wood beading shall be provided all round.
(b) Long rail
(c) Short rail
(d) Legs square & round type
(e) Short/long stiffeners
(f) S&F second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs.
(g) Drawers complete as per drg
(h) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Table Centre (900 x 450 mm)(FD-274) Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Table top new made of pre laminated particle board (exterior grade ) with teak face one side and other side white of size 900 x 450 x 18mm thick with 04 mm thick half raound teak wood beading shall be provided all round.
(b) Front and back rail
(c) Short rail
(d) Legs square & round type
(e) Short/long stiffeners
(f) S&F second class hard wood corner / bracket (L shape) of size 50 x 50 x 20 mm thick and fitted with screw between long rail to legs short rail to legs.
(g) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Table Peg (450 x 300 mm)(FD-277) Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Table top new made of pre laminated particle board (exterior grade ) with teak face one side and other side white of size 450 x 300 x 18mm thick with 04 mm thick half raound teak wood beading shall be provided all round.
(b) Front and back rail
(c) Short rail
(d) Legs square & round type
(e) Short/long stiffeners
(f) S&F second class hard wood corner / bracket (L shape) of size 50 x 50 x 20 mm thick and fitted with screw between long rail to legs short rail to legs.
(g) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Table Dinning 06 persons (1500 x 900 mm)(FD-273) Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Table top new made of pre laminated particle board (exterior grade ) with teak face one side and other side white of size 1500 x 900 x 18mm thick with 04 mm thick half raound teak wood beading shall be provided all round.
(b) Front and back rail
(c) Short rail
(d) Legs square & round type
(e) Top centre stiffeners size of 100 x 25mm
(f) S&F second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs.
(g) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Table Dinning 08 persons (1800 x 900 mm)(FD-273) Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Table top new made of pre laminated particle board (exterior grade ) with teak face one side and other side white of size 1500 x 900 x 18mm thick with 04 mm thick half raound teak wood beading shall be provided all round.
(b) Front and back rail
(c) Short rail
(d) Legs square & round type
(e) Top centre stiffeners size of 100 x 25mm
(f) S&F second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs.
(g) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Teapoy Wooden (600 x 450mm)(FD-278) Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Table top new made of pre laminated particle board (exterior grade ) with teak face one side and other side white of size 600 x 450 x 18mm thick with 04 mm thick half raound teak wood beading shall be provided all round.
(b) Front and back rail
(c) Short / side rail
(d) Legs square & round type
(e) Short/long stiffeners
(f) S&F second class hard wood corner / bracket (L shape) of size 75 x 75 x 20 mm thick and fitted with screw between long rail to legs short rail to legs.
(g) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Table Dressing Gents(FD-378) Supply and fixing the following new parts after removing broken parts of prelaminated particle board exterior grade including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Replacement of old unserviceable top or bottom and fabricated out of pre-laminated particle board with teak veneers one side and other side white 18 mm thick fixed to timber frame work with screws complete all as shown on drawings.
(b) Replacement of old unserviceable side rail fabricated out of pre-laminated particle board with teak veneers one side and other side white 18 mm thick fixed to frame work with screws complete all as shown on drawings.
(c) Replacement of old unserviceable plywood, 4 mm thick, commercial on back side of the table complete all as shown on drawings.
(d) Aluminum anodized knob 25 mm of best quality.
(e) Replacement of old unserviceable looking mirror 5.0 mm thick fixed to the frame of table dressing gents complete all as shown on drawings.
(f) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Hard Bed(FD-247, FD-246) Supply and fixing the following new parts after removing broken parts including tightening with screw other members of bed complete all as specified ans shwon on drg. (a) Top ply 12mm thick of size bed hard complete 1950 x 900 mm. (BWR) as per IS-303 (07 ply) of commercial general purpose
(b) Long rail of shisham wood of size 100mm x 50mm x 1980mm.
(c) Fixing only shor rail after cutting to required length from old retrieved long rail.
(d) Ply wood 3mm thick teak faced to the direct vision of head rest and ply wood commercial 3 mm thick to other side including 4mm thick shisham wood edging all around.
(e) All as per srl No 11 (d) here-in-before but to foot rest.
(f) Leg to head rest sdie of bed of required and size.
(g) Leg to foot rest side of bed.
(h) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Bin Soiled Linen (FD-244) Supply and fixing the following new parts after removing broken parts including tightening with screw other members and all as specified and shwon on drg. (a) Removing old unserviceable cane of both side of bin solid linen and supply and fixing aluminium X PM Jali fixed to the existing frame with shisham wood beading all around.
(b) Leg and runner
(c) MS Chromium plated piano type hinges 75mm wide.
(d) Back side of bin solid linen with 12mm thick commercial ply wood.
(e) Top & Front of bin shall be fixed with ply wood 6 nn thick teak veneer face.
(f) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Side Board(FD26(M)-241) Supply and fixing the following new parts after removing broken parts including tightening with screw other members of the side board complete and all as specified and shwon on drg. (a) Shutter made out of prelaminated particle board exterior grade size of 220mm x 435mm x 18mm thick including 4 mm thick shisham wood beading all around fixed with continuous piano type hinge 40mm wide.
(b) Drawers made out of prelaminated teak faced pre laminated particle board shown on drg.
(c) Aluminium anodized knob 25mm of best quality.
(d) Top of side board made out of pre laminated particle board of 18mm.
(e) Sides of side board made out prelaminated particle board of 18mm.
(f) Front and rear leg including long and side rail frame fabricated out of shisham wood all as per shown on drg.
(g) Plywood 4mm thick commercial on back side of the side baord.
(h) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Table writing (FD-249, 275) Supply and fixing the following new parts after removing broken parts including tightening with screw other members of the table writing complete and all as specified and shwon on drg. (a) Top of table made out of prelaminated particle board 18mm thick 1145 x 600 mm with 4 mm thick shisham wood beading all around.
(b) Cabinet of table
(c) Drawers of table.
(d) Shutter of table of size of 570mm x 405mm made out of 18mm thick prelaminated particle board including piano type hinges 40mm wide.
(e) Leg of table of 1st class shisam wood size of 45 x 45 x 750mm.
(f) Foot rest of table of 1st class shisam wood size of 50 x 25 x 1025mm.
(g) Aluminium anodized knob 25mm of best quality.
(h) Lock shall be of brass multipurpose 4 lever with duplicate key size 40 mm as shwion on drg.
(j) S&F second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs.
(k) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Table Bed side (FD-276) Supply and fixing the following new parts after removing broken parts including tightening with screw other members of the table bed side complete and all as specified and shwon on drg. (a) 18mm thick pre-laminated particle board side runner including legs of table with 4mm thick teak wood beading all around.
(b) 18mm thick pre-laminated particle board top side of the table made out of teak faced with 4mm thick teak wood beading all around. .
(c) 18mm thick pre-laminated particle board top / sheleve & bottom sheleve self of the table made out of teak faced.
(d) Plywood 4mm thick commercial on back side of the table bed side .
Chair easy (FD-229) Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening with screw and other members of the chair easy complete and all as specified and shwon on drg. (a) Front leg round and square type.
(b) Rear leg of sizeas Shown on drg
(c) Front seat rail of size as Shown on drg
(d) Back seat rail of size as Shown on drg
(e) Side frame rail of size as Shown on drg
(f) Front rail of size as Shown on drg
(g) Rear frame of rail of size as Shown on drg
(h) Back frame rail of size as Shown on drg
(j) Arms of size as Shown on drg
(k) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Chair Dinning (FD-279) Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening with screw and other members of the chair easy complete and all as specified and shwon on drg. (a) Rear leg of size as Shown on drg
(b) Front leg of size as Shown on drg
(c) Front rail of size as Shown on drg
(d) Back rest of size as Shown on drg
(e) Side rail of size as Shown on drg
(f) Back rail rail of size as Shown on drg
(g) Stiffener (one large piece and two small piece) of size as Shown on drg
(h) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Chair Writing (FD-280) Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening with screw and other members of the chair easy complete and all as specified and shwon on drg. (a) Rear leg of size as Shown on drg
(b) Front leg of size as Shown on drg
(c) Arms of size as Shown on drg
(d) Stiffener (one large piece and two small piece) of size as Shown on drg
(e) Back and side rail of size as Shown on drg
(f) Back rest of size as Shown on drg
(g) Front rail of size as Shown on drg
(h) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Chair wooden bottom (FD-275, FD-285) Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening with screw and other members of the chair wooden bottom complete and all as specified and shwon on drg. (a) Rear leg of size as Shown on drg
(b) Front leg of size as Shown on drg
(c) Front rail of size as Shown on drg
(d) Back rest of size as Shown on drg
(e) Side rail of size as Shown on drg
(f) Back rail of size as Shown on drg
(g) Stiffener (one large piece and two small piece) of size as Shown on drg
(h) Seat of 6mm thick plywood commercial
(j) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Safe Meat & Milk (FD-389) Removing old broken unserviceable parts of meat safe X PM Jali wire gauge, side and top and legs and suply and fixing wire gauge, leg and top of meat safe and making serviceable condition/functional and painting with one coat of synthetic enameled paint white including prewparation of surfaces complete all as specified and shown on drg .
Stool dressing CB/Cushioned (FD-282). Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening with screw and other members of the Stool dressing CB/Cushioned. complete and all as specified and shwon on drg. (a) Legs
(b) Side Rail
(c) Stiffener
(d) Cushioned of stood dressing with new tapestry closth or rexine as per sample approved by GE & as directed by Engr-in-Charge.
(e) Polishing all new and old surfaces with two coats of French polish and directed by Eng -in-charge.
Hat stand with mirror (FD-352) Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening with screw and other members of the Hat stand with mirror complete and all as specified and shwon on drg. (a) U/s mirror with new mirror 5 mm thick.
(b) Aluminium hook
(c) Edging
(d) Back made out of 6mm ISI maked. Plywood commercial.
(e) Polishing all new and old surfaces with two coats of French polish and directed by Eng -in-charge.
Notice Board (FD-99, 117) Removing the old u/s soft bd, baize green and wooden frame of notice bd and S&F the new baize green and soft bd, frame and finishing of wooden surfaces with french polish complete and of the following size. (a) Notice boad of size 1830 mm x 1220 mm
(b) Notice boad of size 2400 mm x 1200 mm
(c) Notice boad of size 900 mm x 600 mm
(d) Notice boad of size 1500 mm x 900 mm
(f) All as per Srl item No 22 (d) here-in-before but of size 2400 mm x 1200 mm
(g) All as per Srl item No 22 (d) here-in-before but of size 900 mm x 600 mm
(h) All as per Srl item No 22 (d) here-in-before but of size 1500 mm x 900 mm
TV Trolly (FD/E6/MAP/04) (a) Replacement of side or bottom or top frame made out of pre-laminated particle board in existing TV trolly after replacement of old USSV side bottom and top frame.
(b) Provisin of aluminium anodize channel in exsting TV Trolly to slide the glass after taking out of UNSV Glass door.
(c) Replacement of Glass shutter in two pieces 5 mm thick along with sliding wheel for smooth function of glass shutter drawers in existing TV trolly as shown on Drawing and directed by Engtr-in-charge.
(d) Replacement of caster wheel of existing TV trolly as shown on drawing and directed by Engr-in-Charge.
Bin soiled linen multi purpose (FD/E6/MAP/09) Supply and fixing the following new parts after removing broken parts including tightening with screw other members of the Bin solid multi purpose complete and all as specified and shwon on drg. (a) 18mm thick pre-laminated particle board top existing bin soiled linen multi purpose shape and size shown on drawing including 4mm thick teak wood beading all around.
(b) 18mm thick pre-laminated particle board bottom existing bin soiled linen multi purpose shape and size shown on drawing including 4mm thick teak wood beading all around.
(c) 18mm thick pre-laminated particle board side existing bin soiled linen multi purpose shape and size shown on drawing including 4mm thick teak wood beading all around.
(d) 18mm thick pre-laminated particle board drawers existing bin soiled linen multi purpose shape and size shown on drawing including 4mm thick teak wood beading all around.
(d) 18mm thick pre-laminated particle board shutter existing bin soiled linen multi purpose shape and size shown on drawing including 4mm thick teak wood beading all around.
(e) Chromium plated handle fency type 100mm as per sample
(f) Plywood 6mm thick commercial on back side of the Bin soiled linen multi purpose including legs frame.
Table Dinning (1200 x 900 mm) (FD/MAP-II/03) Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Table top new made of pre laminated particle board (exterior grade ) with teak face one side and other side white of size 1200 x 900 x 18mm thick with 04 mm thick half raound teak wood beading shall be provided all round.
(b) Front and back rail
(c) Short/side rail
(d) Legs square type
(e) S&F second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs.
(f) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Shri Gajanand Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .