Motor pump maintenance for faizpur municipal council

Amount

Supplying and replacing MNX three pole power contactors {L&T MNX Power Contactors 415V AC (3 Pole)}/ Siemens/Metasol make 3 Pole, 3 Phase, AC (AC magnetic contactor, suitable for use with 3TF series motor control systems) for motor starter:

SIEMENS - 3TF51

SIEMENS - 3TF53

LS Make MC - 225 a/4

Supplying, erecting & marking MCB with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board:

25 AMP 415 Volt mark

32 AMP 415 Volt ISI mark

40 AMP 415 Volt Isl mark

63 AMP 415 Volt ISI mark

125 AMP 415 Volt ISI mark

200 AMP 415 Volt ISI mark

Supplying and erecting electrical control panel electrical components:

INDICATOR R, Y, B MAKE- TECNIC, 22.5 mm

VOLT METR, range 0 - 500 volts, 96x96

CT OPERATED AMMETER, range 0 - 200 amp., 96x96

ROTARY SWITCH RYB AMP./VOLTMETER

C- channel

Rewinding of electric motor of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc.:

Upto 10 HP

Upto 20 HP

Upto 40 HP

Upto 100 HP

Upto 150 HP

Upto 250 HP

Upto 350 HP

Upto 450 HP

Supplying and replacing No-Volt-Coil for motor having DOL starter and Star-Delta Starter from:

Upto 15 HP

Upto 30 HP

Upto 90 HP

Upto 125 HP

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V aluminium conductor complete erected with lugs, on wall/ trusses/pole or laid in provided trench/ pipe:

2CX10 SQMM

4CX10 SQMM

4CX16 SQMM

4CX25 SQMM

4CX35 SQMM

4CX50 SQMM

3.5CX70 SQMM

3.5CX95 SQMM

3.5CX120 SQMM

4CX70 SQMM

4CX95 SQMM

4CX120 SQMM

4CX150 SQMM

4Cx180 SQMM

4CX240 SQMM

4CX300 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe:

1CX25 SQMM

1CX35 SQMM

1CX50SQMM

2CX2.5 SQMM

2CX4 SQMM

2CX6 SQMM

2CX10 SQMM

3CX2.5 SQMM

3CX4 SQMM

3CX6 SQMM

3CX10 SQMM

4CX4 SQMM

4CX6 SQMM

4CX10 SQMM

Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable with necessary material:

120 to 185 sq. mm.

Supplying & erecting crimping type copper lugs for cable complete:

Upto 50 sqmm

Upto 70-120 sqmm

Upto 150-300 sqmm

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(UE), aluminium conductor laid in provided trench / pipe:

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(UE), 3 x 150 sq. mm. aluminium conductor laid in provided trench / pipe

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(UE), 3 x 185 sq. mm. aluminium conductor laid in provided trench / pipe

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(UE), 3 x 240 sq. mm. aluminium conductor laid in provided trench / pipe

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(UE), 3 x 300 sq. mm. aluminium conductor laid in provided trench / pipe

Supplying , erecting & terminating XLPE insulated galvanised steel formed wire armoured (strip) cable 11 kV(UE), 3 x 400 sq. mm. aluminium conductor laid in provided trench / pipe

Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable with necessary material:

150 to 185 sqm.

240 to 300 sqm.

Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable with necessary material:

Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E )Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material

Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material

Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material

Providing and erecting Heat shrinkable out door termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material

Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material

Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material

Providing and erecting Heat shrinkable straight through joint kit for 11 kV (UE)/22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material as

Providing and erecting Heat shrinkable straight through joint kit for 11 kV (UE)/22 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material

Providing and erecting Heat shrinkable straight through joint kit for 11 kV (UE)/22 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material

Providing and erecting Heat shrinkable straight through joint kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x 400 sq. mm. with necessary material

Fault detection and repairing of MCC panel and ATS panel:

Fault detection and repairing of MCC panel and ATS panel as per site requirement (labour part only)

Sub Stations (SS) works:

Supply of transfomer oil

Overhauling of 200 KVA transformer

Overhauling of 800 KVA transformer

Overhauling of 1000 KVA transformer

Supplying and erecting 11 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp.

Supplying and erecting 11 kV outdoor type gang operated air break, triple pole switch 400 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp.

Supplying and erecting, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm.

Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification no SS-AS/FSG

Supplying and erecting 50 x 50 x 6 mm angle iron as corner support 2m long fixed at the middle of the fencing frame and the other side inclined at 30 degree angle, in cement concrete foundation of 15 x 15 x 40 cm complete duly painted with one coat of red oxide and two coats aluminium paint complete.

Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete

Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG barb with a gap between two bars of 75 mm. firmly fixed on provided angle supports with necessary materials complete. (6.044 meters/kg.).

Transportation of 11/22 kV transformer above 315 kVA to 1000 kVA without loading & unloading (for handing over to section store/ repair works only)

Dismantling the existing distribution transformer of any capacity from the plinth / foundation safely without any damages.

Dismantling existing DO / AB switch set complete from D.P. structure in an approved manner.

Supplying and erecting 11 kV fuse barrel with metal fittings complete.

Supplying and erecting hard drawn copper solid wire no. 0 to 6 SWG complete erected for connections on H.T. sides.

Supplying and erecting extra thick alkathene pipe 10 mm dia. erected to enclose bare conductor wires complete.. (use shall be restricted to H.T.)

Supplying heavy duty operating rod, outer dia 25 mm & inner dia 20 mm suitable for 11 kV with brass couplings etc. for removing drop out fuses at 6 meters length, 4 pieces each with rain shade with hand grip including earthling chain 1.5m complete.

Supplying and erecting copper tubular bus 20 mm dia 1.6 mm (16 SWG) thick for the use of high tension over head bus and erected on provided HT insulators with clamps, nuts and bolts complete. (weight per meter of bus is about 1.7 kg.)

Supplying and erecting clamps, made out of 25x3 mm, copper strips to be fixed to tubular bus for connecting the bare copper wire to other equipment, with brass nuts bolts of suitable dia complete.

Supplying and erecting anti climbing devices, fabricated from pole clamps of MS flat 40x5 mm, with drooping spikes 15 cm. in length, welded to it and erected on pole complete.

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 having 2.5 mm thickness up to 11 kV

Supplying , erecting Indoor LED Fittings:

Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying , erecting Outdoor LED Fittings:

Supplying and erecting integrated LED flood light fitting Max. 100W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty

Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty

Supplying , erecting point wiring and MCBDBs:

Point wiring for independent plug in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type)

Supplying , erecting Cable Enclosures / Excavation and Earthing:

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete.

Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.

Excavating soft murum / soft soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good complete.

Supplying & laying (including excavation) half round reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results

Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required.

Service charges for Manpower of Services:

Service charges for Manpower of Helper Services

Service charges for Manpower of Skilled Electrician Services

Supply and installation of Lifting tools and tackels:

Manual chain pulley block with trolly (capacity- 5 Tonnes)

Electrical hoist of capacity- 5 Tonnes with trolley

Supply and installation of Steel Poles:

Supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm dia with 4.5x3.65x3.25 mm thickness (4.5+1.75+1.75 m) length respectively and total 8.0 m long with pole cap, base plate in provided foundation. (weight 101 kg)

Supply and installation of Accessories for Outdoor Fittings:

Supplying and erecting Street light bracket for erection of Double fitting made from 40 mm. dia ‘B’ class G.I. pipe 1.0 m. in length along with pole cap of 300 mm length 100 mm dia duly welded

Supply and installation of WIRING:

Supplying and erecting mains with WP 2 x 6 sq. mm. 1100 V. grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire.

Supplying and erecting mains with WP 2 x 4 sq. mm. 1100 V grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire.

Point wiring in for light/fan/bell in 20 mm metal conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories

Point wiring for independent plug in 20 mm metal conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories

Repairing work for 20 HP Centrifugal Motor Pump set:

Supply of Following spares for above pumpset:

Motor Cooling Fan

Rotter Balancing

Best Quality grease AP 3

Bearing Cap

Motor Top bearing

Motor Bottom bearing

Motor top and bottom Shaft Welding Turning

Oil Seal

Bearing check - nut

Motor housing Cover Top

Motor housing Cover Bottom

Motor connection plate

Motor connection lugs

Pump Shaft Sleeve S/S

Pump Shaft S/S (New)

Pump Shaft Balance

Pump Impeller

Impeller Neck Ring

Impeller Balance

Impeller diffuser

Oil seal & Mechanical Seal

Coupling Bush

Repairing work for 30 HP Centrifugal Motor Pump set:

Supply of Following spares for above pumpset:

Motor Cooling Fan

Rotter Balancing

Best Quality grease AP 3

Bearing Cap

Motor Top bearing

Motor Bottom bearing

Motor top and bottom Shaft Welding Turning

Oil Seal

Bearing check - nut

Motor housing Cover Top

Motor housing Cover Bottom

Motor connection plate

Motor connection lugs

Pump Shaft Sleeve S/S

Pump Shaft S/S (New)

Pump Shaft Balance

Pump Impeller

Impeller Neck Ring

Impeller Balance

Impeller diffuser

Oil seal & Mechanical Seal

Coupling Bush

Repairing work for 40 HP Centrifugal Motor Pump set:

Supply of Following spares for above pumpset:

Motor Cooling Fan

Rotter Balancing

Best Quality grease AP 3

Bearing Cap

Motor Top bearing

Motor Bottom bearing

Motor top and bottom Shaft Welding Turning

Oil Seal

Bearing check - nut

Motor housing Cover Top

Motor housing Cover Bottom

Motor connection plate

Motor connection lugs

Pump Shaft Sleeve S/S

Pump Shaft S/S (New)

Pump Shaft Balance

Pump Impeller

Impeller Neck Ring

Impeller Balance

Impeller diffuser

Oil seal & Mechanical Seal

Coupling Bush

Repairing of 60 HP V.T Pumpset

Removing and Dismaintling of 60 HP V.T pump set with allied equipments etc complete

Repairing of vertical Turbine pump with turning, grinding and polishing of bowl assembly and required spares with skilled labour charges etc. complete

Supply of Following spares for above pumpset

Stuffing box bushing bronze

Gland sleeve S.S.

Rubber Bush

Ratchet as per sample

Neck ring bronze

Bowl bush

Bowl turning and surface counter and top

Impeller

Impeller collect

Impeller turning

Impeller balancing

Top shaft S.S

Column pipe EN - 8

Column shaft

Shaft sleeve

Special strengthen Heavy Duty nut bolts for total pump set

Rubber Packing

Pump Foundation plate surfacing and Finishing etc. complete

Column pipe repair with welding of ribs to MS Flange with machining etc

coupling Socket

Spyder

Spyder rubber

Pump Shaft

Complete servicing of 60 HP V.T motor with checking insulation winding, varnishing and rotor balancing etc complete .

Transportation of V.T Pumpset with loading and unloading by crane with too and from site etc complete

Erection and assembling of 60 HP V.T Pumpset with bowl assembly, discharge head, coloumn pipe, line shaft with allied equipments etc complete .

Repairing of 60 HP Motor:

Removing and Dismaintling of 60 HP VHS type Motor with allied equipments etc complete

Complete rewinding of motor with quality copper wire 'F' class insulation including heating, varnishing, backing and skilled labour charges etc complete with testing of site of work .

Supply of Following spares for above pumpset

Rotor balancing

Cooling fan

best quality grease Ap3

140 No. bearing oil

Motor top bearing

Motor bottom bearing

Motor bottom / top Shaft welding turning

Oil seal

Motor lock ratchet check lock key complete bushing S.S & etc.

Brass pipe & Nipple etc complete

Terminal

Brass Lugs

Motor housing cover top

Motor housing cover bottom

Bearing checknut

Cerclip

bearing Cap

Transportation of motor with loading and unloading by crane with too and fromsite etc complete

Erection and assembling of 60 HP VHS type motor with allied equipments etc complete .

Supplying & erecting DOL starter:

Supplying & erecting Star Delta Starter:

Supplying & erecting HRC fuse cartridge 415V:

Supplying & replacing timer for STAR/DELTA motor starter:

GIC Stardelta Timer

GIC Timer SM-301

Time Switch Timer

Supplying and replacing thermal over load relay for motor starter:

Relay Range 4 to 6 Amp

Relay Range 9 to 14 Amp

Relay Range 13 to 21 Amp

Relay Range 45 to 75 Amp

Supplying & erecting four pole ON LOAD change over switch, 415V, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, rotary handle, operational current category AC23A complying to IS/IEC 60947-3 Part-1/3:

25 AMP 415 Volt mark

32 AMP 415 Volt ISI mark

40 AMP 415 Volt ISI mark

63 AMP 415 Volt ISI mark

125 AMP 415 Volt ISI mark

200 AMP 415 Volt ISI mark

Repairing of motor starter (Rate quoted per HP of pump)

Technova Infrastructure Private Limited (BID ID -6562290)

SHIVSHAMBHO ELECTRICAL (BID ID -6562613)