SPL REPAIR TO BLDG NO F-37 AT HAWK HILL UNDER AGE B/R-II OF GE SAUGOR

Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed. Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates. (ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder.

Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed. Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates. (ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder

M&L for mild steel framed work such as grills gratings, sun shed cover fixed with nut bolts incl, cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framed work or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, supplying & fixing in opening as per specification. Note: The cost of fasteners (10mm dia, 100mm long, min 6 Nos.) shall be deemed included in quoted unit rates.

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 5 mm thick moulded PVC sheet on the front face & 5mm prelam PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc, one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed. Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates.

S&F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc , one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed. Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates.

M&L for 2nd class hardwood (Sal) as in scantlings, timber clean sawn, 40Sqcm and over in section, framed and fixed including two coats of synthetic enamel paint over a coat of pink primer (after preparation of surface) and dismantling existing scantlings of any description in any position complete all as specified and directed.

M&L for 30mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides fixed to frame including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. Note: The cost of synthetic enamel paint and primer work shall deemed included in quoted unit rates.

M&L for 2nd class HW (Teak) glazed and skeleton shutters ( factory made), 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkhats including two coats of synthetic enamel paint over a coat of pink primer (after preparation of surfaces complete all as specified and directed. Note: (i) The cost of synthetic enamel paint and primer work shall deemed included in quoted unit rates. (ii) The glass and wire gauge shall be measured and paid separately under respective item here under.