PETTY REPAIR WORKS SERVICES TO 820 SU, 71 RMU, 14 RMU, 14 PSU AND BEGUM BAZAR AT AF STATION BAMRAULI

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F in repairs 9mm thick plywood, grade BWR, type BB, fixed with nails complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and directed.

M&L for Non skid ceramic jointless coloured tiles (Premium quality) 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match with the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for glazed coloured ceramic tiles (Premium quality) in vertical surfaces of size 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match with the colour of tiles laid over and including a backing coat of 10 mm thick in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete (Un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below and above ground level) and removing the unserviceable materials to a distance not exceeding 100m complete all as specified and as directed.

M & L for chequered cement concrete tiles of size 200mm x200mm x 25 mm thick set, jointed and pointed in neat cement slurry and pointed with coloured cement to match with colour of tiles laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (Using 40mm graded stone aggregate) as in sub base flooring/mass concrete/foundations complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-1 (Using 40mm graded stone aggregate) as in plinth protection complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frame) & removing from site complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each (without taking off shutters from the frames) & removing from site complete all as specified and directed.

S&F steel window with side hung shutter (mosquito proof) with box type hinge, steel peg stay, lugs, handles, without glazing bars complete including one shop coat of red oxide primer complete all as specified and directed.

S&F steel window with side hung shutter ( glazed) including box type hinges, steel handle, peg stay lugs complete with glazing bars and painted with one soap coat of red oxide primer complete all as specified and directed.

M & L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete of size 125 x 60mm complete all as specified and directed.

M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work con- forming to Fe-290, Grade-E-165 complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm PVC sheet reinforced with MS square tube including making good the surfaces complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on Sl Page No.146 of SSR Part II with the size of door shutter as required & directed by the Engineer-in-Charge.

S&F Flush shutters 30mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35 mm thick of second class hardwood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc., (with sash bars) size of members of shutters as specified in SSR part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F MS flat iron as in hold fast etc and similar work including making shape, drilling holes etc, conforming to Fe- 290, Grade E-165 complete all as specified and directed.

M&L for PCC 1:3:6, type C1 (Using 20mm graded stone aggregate) as in bed plate/bed blocks for fixing holdfast etc complete all as specified and directed.

S&F galvanized aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized with aluminium wire staples complete all as specified and directed.

S&F in repairs galvanized aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized with aluminium wire staples complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm each pane complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.

S&F in repairs door closer, hydraulically regulated, designation No 3 universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80Kg and fixed, aluminium (die cast) body complete all as specified and as directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F powder coated aluminium anodized door of partly panelled and partly glazed with 4.5mm thick plain sheet glass of ordinary quality and 12mm thick particle board of exterior grade both sides laminated and aluminium section weight not less than 0.55 Kg/RM with and including self-closing hydraulic door closer & floor spring etc with all fittings as necessary complete all as specified and directed.

S&F in repairs venetian blinds vertical type level or ultima 100mm width of strip with necessary pulling threads aluminium channel along with all arrangement fixed to wall complete all as specified and directed.

S&F 200m mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 all as specified and as directed.

S&F 100 mm long aluminium handles, cast type, anodised complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brickwork with sub class "B" bricks ( Using designation 100 bricks in lieu of 75), straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 of complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M&L for 5mm thick rendering on ceiling surfaces in CM 1:3 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work and finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of cement base primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over and including 3 mm thick white wall care putty on walls to obtain smooth finish as required complete all as specified and directed.

M&L for preparation of old decorated/plastered or un-plastered wall surfaces and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old distempered wall surfaces by washing, rubbing down and stopping of distempered surfaces and applying one coat oil bound distemper on wall surfaces white or tinted complete all as specified and directed.

All as per Sl Item No.45 above but one coat of oil bound distemper on ceiling surfaces complete all as specified and directed.

M&L for complete removing of existing treatment on wall surfaces and applying two coats of oil bound distemper over and including 3mm thick white wall care putty finish on walls to obtain smooth finish as required complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of ACE exterior emulsion paint (Asian paint) on wall surfaces complete all as specified and directed.

S&F in repairs PVC 32mm dia waste pipe of not less than 600 mm long complete all as specified and directed.

S & F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks triple layer, white colour (Cylindrical vertical with closed top) ISI marked/embossed ,hoisted and fixed in position complete all as specified in SSR Part I and as directed.

S&F 20 mm size ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed.

S&F in repairs 20 mm size ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed.

Taking up or down 15 mm dia steel tubing and connections complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections complete all as specified and directed.

S&F 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

S&F 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc complete all as specified and directed.

M&L cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends and making good cutting exceeding 20cm girth for concealed water tubing or concealed conduit wiring, etc complete all as specified and directed.

S &F in repairs health faucet, brass, chromium plated with pipe length 1200mm, washers, connections etc complete all as specified and as directed.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) and including fixing of the following components viz. pedestal pan with "P" or "S" trap, seat and cover for pedestal pan, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper fixed as in repairs complete all as specified and as directed. Note:- S&F Flushing cistern and flush pipe including taking down as required shall be measured and paid separately.

S&F in repair vitreous china wash basin, white, flat back, size 550mm x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and including fixing of the following components viz. pillar taps, waste fittings and union, plugs and chains and connecting upto supply pipes, wastes or traps, screws, plugs, cement mortar and other subsidiary materials required for fixing including cutting for and pinning in ends of brackets complete all as specified and as directed. Note:- (i) Fixing of pillar tap, waste fittings, waste pipes is deemed to be in included in the unit rate quoted. (ii) Supply only pillar tap, waste fittings, waste pipes will be measured and paid separately.

S&F in repairs Vitreous china squatting pan " Orissa pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) including P or S trap connection to trap, and to flushing pipe anti syphonoge pipe etc including making good to floor complete all as specified and directed.

S&F in repairs PVC valve less, syphonic action type, white low level flushing cistern of capacity 10 litre with inlet ball valve float and handle including brackets and 32 mm dia PVC flush pipe complete all as specified and directed.

S&F in repairs towel rail 600mm long of aluminium fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 270 gms) complete all as specified and as directed.

Supply only waste fittings, brass, chromium plated for glazed ware basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of bore of pipe 32mm complete all as specified and as directed.

S&F in repairs grating doom 100mm dia of chromium plated (Minimum weight 60 gms) complete all as specified and directed.

S&F in repairs 15 mm size stop valve, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs 15 mm size bib tap long body with wall flange fancy type chromium plated brass screwed for iron pipe with capstain head complete all as specified and directed.

S&F in repairs 125mm size brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

Supply only 15 mm size pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified and as directed.

S&F in repairs 15 mm size pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe 15 mm fixed complete all as specified and directed.

S&F in repairs 32 mm bore waste fittings, brass, chromium plated for glazed ware basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of bore of pipe 32mm all as specified and as directed.

Cleaning and removing all scale, dirt etc, from tanks and from mouths of circulating pipes, etc. capacity exceeding 250 ltrs not exceeding 500 Ltrs and disconnecting existing tanks setting aside (or lowering if required) for repair etc and hoisting if required reconnecting and refixing in position complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S & F of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F of 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

Demolition and breaking up drain pipes 100mm dia (Salt glazed stone ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

S&F in repairs rubber bead for wooden door complete all as specified and directed.

M&L for welding in repairs thickness of metal to be welded exceeding 20mm but not exceeding 25mm size of length exceeding 2.5 cm but not exceeding 5 cm in length complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

S&F in repairs 150 mm size double action spring hinges mild steel with steel wire spring stove enamelled black complete all as specified and directed.

M&L for 15mm thick fine fissured tegular Rh 99 (Superior humidity resistance) Effective sound absorption: 0.6Nrc, acoustic purpose of size 600x600x15mm thick fixed with dash through fastener bolts of approved quality 04 Nos for per Sqm including necessary cutting securing and making good complete all as specified and directed. Make : Armstrong Note : (i) Material shall be procured directly from manufacturer or authorised dealer (ii) Fixing of acoustic ceiling work shall be executed by authorised technicians of manufacturer.

M&L for Aluminium window (Powder coated) double leaf/three leaf with anodized aluminium frame sliding/open-able including wheel powder coated of section 62.5x37x2.5 mm thick shutter with bottom & middle rail of section 112.5x37x2.5mm and style & top rail of section 83x37x2.5mm thick with centrally locking arrangement with lock rail of rebate including joints cleat fixing of builders hardware fittings necessary and glazing with 5.5mm thick ordinary plain sheet glass including wire mesh shutter necessary fittings fixtures & aluminium snap beads complete all as specified and directed. Note : (i) Supply only glazing/sheet glass 5.5 mm thick will be measured and paid separately (ii)Weight of aluminium sections including aluminium builders hardware will be measured for payment (iii) The unit rate quoted is deemed to inclusive rubber beading/gasket, rollers etc as required for complete window.

Supply only oridunary sheet glass 5.5 mm thick complete all as specified and directed.

Preparation of old painted surfaces of wood and wood based materials of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per Sl Item No.87 above but on steel surfaces

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.

M/S KESHRI WORKERS

MOHAMMAD RIZWAN CONTRACTOR

VIPUL CONSTRUCTIONS

M/S SURISONS

bharat construction

M/S SATISH KUMAR

M/S AM ENTERPRISES

M/S Aquarius Construction