85884 SPECIAL REPAIRS TO BLDG NO. P-46 SINGLE LIVING OTM ACCN (PERS LINE) ALONGWITH BATHROOMS AND TOILETS AT CHSC PUNE UNDER GE SOUTH PUNE

Amount

Demolition of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar, as in floor complete all as specified & directed.

M&L for PCC 1:2:4, Type B-0 using (12.5mm graded stone aggregates), 25mm thick, finished even and fair, complete all as specified & directed.

M&L for double charged Vitrified tiles (600mm X 1200mm X 10mm thick) Coloured (square/rectangular) in floors etc. of dark shade, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM (1:6) etc complete all as specified and as directed.

M&L for double charged Vitrified tiles (600X1200X 10 mm thick) Coloured (square/rectangular), in vertical surface as skirting etc. of dark shade, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick cement plaster in cement mortar 1:4 as in backing coat and jointed in grey cement to match complete all as specified and directed.

M&L for matt finished coloured Ceramic tiles (400mm X 400mm X 7 to 8 mm thick) joint free (square/ rectangular) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) etc over 25mm thick PCC 1:2:4, Type B-0 using (12.5mm graded stone aggregates), complete all as specified & directed.

M & L for coloured glazed ceramic tiles in dado/skirting 300x600mmx5.5 to 6mm thick , laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10 mm thick CM (1:3) backing coat including triangular filleting on top in CM 1:4 complete all as specified and directed

M&L for 20-25mm thick machine cut cudappah stone slabs, fixed independently in shelves for cooking platform and the like etc complete all as specified and as directed.

M&L for 18 to 20mm thick Granite (of any type/colour) work (table rubbed and polished) in steps, pillars; window cills/jamb, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as counters of any radius etc laid over and including 15mm thick screed bed in Cement Mortar (1:6) complete all as spcecified and directed.

Rounding to edges of stone slabs and polishing in edges, such as in steps,shelf cooking platform, and other similar situations complete all as specifed and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring complete complete all as spd and as directed;

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade rubber moulded glossy finish with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of M sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 305 x 305mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

Removing of old water proofing treatment including screed bed and cleaning the surface of slab with wire brushes removing dust, foreign materials including flushing at junction of wall and removing the rubbish off the premises to a distance exc 500m complete all as directed by Engr-in-Charge

M&L for water proofing treatment to RCC roof slabs, walls, chajjas etc shall be carried out as specified below and as directed by Engineer-in-Charge. (a) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chajjas etc by brooming with broom sweeping free from dust etc and evenly applying a coat of approved bituminous primer @ 0.20 Kg/Sqm of area complete all as specified. (c) Laying 3mm thick APP polymer modified approved membrane non woven, polyster weighing not less than 3.0 Kg/Sqm with laps and overlaps as specified and joints sealed and applied complete by torch application method all as specified and directed by Engineer-in-Charge. Carrying out test by flooding water for 24 hrs for leakage and seepage and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified and as directed by Engineer-in-Charge.

M & L for cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in surface channels, chajja coving and base slab for tank complete all as specified and directed.

Demolition of reinforced cement concrete complete all as specified and directed.

M&L for Formwork to chajjas, chullah hoods, troughs and similar items including edges including fair finished surfaces scaffholding and necessary safety measures complete all as specified and directed.

M&L for TMT bars, 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for reinforced cement concrete 1:1½:3 type B-0 using 12.5mm graded stone aggregate in Chajjas complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) 75mm thick laid in alternate bays including finishing the surfaces even and sooth using extra cement as in plinth protection, PCC path complete all as specified and directed.

Demolition of Brick work, solid block or stone Masonry built in cement mortar or cement lime mortar complete all as specified and as directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces with WPC @ 3 % by weight of cement complete all as specified and as directed by Engr-in-Charge. (Note :- WPC shall be measured and paid separately)

M&L for rendering 15mm thick in CM (1:6) on stone masonry/brick/concrete surfaces including taking down cement plaster on stone masonry/brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar (1:3) on ceiling surfaces including taking down cement plaster complete all as specified and as directed.

Prepration of newly plaster surface area of wall and applying two coats oil bound distemper over a coat of primer including applying 2mm wall care putty complete all as specified and as directed.

Prepration of newly plaster surface area of ceiling and applying two coats oil bound distemper over a coat of primer including applying 2mm wall care putty complete all as specified and as directed.

M&L for rendering 15mm thick in two layers (10mm+5mm) in cement mortar 1 : 4 & with water proofing compound on other than fair faces of brick work/block masonry or concrete surfaces complete including taking down cement plaster complete all as specified and as directed. (Note :- WPC will be measured separately)

Supply only integral water proofing compound complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including Prepration of newly plastered surface complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces including prepration of old plastered surface complete all as specified and as directed.

Complete removal of existing treatmen of old plaster surface area of wall and applying two coats oil bound distemper over a coat of primer including applying 2mm wall care putty complete all as specified and as directed.

Complete removal of existing treatment of old plaster surface area of wall and applying two coats of cement base paint complete all as specified and as directed.

Taking down chowkats or frames wooden/steel with shutter (w/o taking off shutters from frames) not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames wooden/steel with shutter (w/o taking off shutters from frames) exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and as directed.

Taking down shutter exc 1.5 Sqm and not exc 4 Sqm each and refixing in same opening complete all as specified and as directed.

M&L for complete removal of old painted surface by scrubbing with mechanical devices on old wooden member exc 10cm in width or depth and applying two coats coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed.

Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws including stay hinges for shutters complete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples al as specified and as directed

S&F in repairs 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination of choice colour fixed aluminium frame work as in partition complete all as specified and as directed.

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F pressed steel frames for doors with one or more rebates incl necessary hold fasts, hinges, lock strike plate etc complete as specified size of frame 125x60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S&F IInd class hard wood 35mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F IInd class hard wood 30mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and directed.

S & F ventilators/louvers including 4mm thick x 10cm wide froasted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed :- (a) SP : 20048 (b) Glazing clips : 19352

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick , 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / ridges, fixed with self tapping screws complete all as specified and directed.

Dismantling of wrought iron or mild steel work as in post etc of any description not otherwise provided for complete all as specified and as directed.

S&F for rolled mild steel conforming to grade E-250 (Fe-410W, quality A) as in main and cross beams, hip and jack rafters, purlins, where connected to common rafters and running rails and guides for sliding doors, fixed with angle clips or other connecting plates complete all as specified and as directed.

M&L for Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S & F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed by Engr-in-Charge

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drg given on Sl. Page No. 176 of SSR Part-II 2020 Refer item No. 8080 as specified and directed by Engr-in-charge.

S&F butt hinges 100mm size stainless steel medium weight complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified & directed.

S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts or extruded etc length of bolt 300mm complete all as specified and directed.

S&F aluminium handles, anodised, cast type, of size 150mm complete all as specified and directed.

S & F MS 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F floor door stopper, aluminium alloy body and tongue anodised with hard drawn steel spring of 140mm size overall complete all as specified and directed

S&F aluminium handles, fabricated type, of size 150 mm complete all as specified & directed.

S&F aluminium powder coated fancy type curtain rod 20mm bore all as specified & directed.

S & F aluminium powder coated brackets suitable for 20mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed.

S&F cast iron Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F cast iron floor trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan, 'Pedestal' white, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repair vitreous China squatting pan, 'Orrissa' pattern, size 580xmmx440mm white, with integral foot rests (excluding flushing cistern, flush pipe and waste pipe) and ‘P’ or ‘S’ trap front or back inlet including concrete bedding, complete all as specified and direrected.

S & F in repair Vitreous China Urinal, full stall type, white colour (excluding flushing cistern, flush pipe and waste pipe) including Urinal spreader of CP for fixing with 15 mm bore pipe (Minimum weight 60gms) and Urinal partitions slabs terminating about 40cm above floor line, including chromium plated waste coupling 32mm dia complete all as specified and direcrted.

S & F in repair vitreous china wash basin white flat back of size 550mm x 400mm including 15mm dia CP pillar tap, bottle trap PTMT waste coupling 32mm, chain and plug and PVC waste pipe including CI brackets, etc. complete all as specified and directed by Engineer-in-Charge

S&F in repairs Hand Shower (Health faucet) with 8mm dia, 1.2mtr flexible tube and wall hook with N.R.V. (back flow prevented) complete all as specified & directed. (Make :- Jaquar Product code ALD-CHR-577or equivalent model in CERA / Marc / Kohler as approved by GE.)

S&F in repairs Two way Bib taps CP 15mm borefancy type conforming to CAT No. ARI-CHR-39041 of "Jaquar" or Equivalent make in CERA / Marc / Kohler complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar for bolts, joist, pipes, air flues, ventilators and cast iron boxes superficial area exc 150 sqcm but n exc 400 sqcm and making good in CM (1:3) or PCC (1:2:4) type B-1 as required complete all as specified and as directed.

Supply and fix in repairs brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screw complete all as specified and directed.

S&F in repairs Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valveless,syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets, complete all as specified and directed.

S&F in repairs fancy type bib taps of cast copper alloys chromium plated with capstan heads screwed down screwed for iron pipe or for brass ferrule and fixed for 15mm dia pipe complete all as specified and as directed.

S&F in repairs stop valve 15mm bore, cast copper alloy chromium plated screwed down high pressure with capstan head screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs shower rose bass chromium plated 125 mm dia with swivel joints type, screwed for 15mm bore including jointing to pipe or unions complete all as specifed and directed

S&F looking mirror of size 600 x 450mm approved quality and make, mounted on 6 mm thick plywood commercial as backing and aluminium powder coated frame all around on edges complete all as specified and as directed.

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbow & bend etc complete fixed to wall or in floors etc complete all as specified and as directed. (Note : Pipe will be laid under floor)

S&F in repairs GI tubing 15mm bore medium grade with all fittings & fixed to walls & ceiling or laid in floors including taking down complete all as specified and as directed

All as per Ser. item No. 85.00 above but of 25mm bore complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm and n exc 20cm girth complete all as specified and as directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 mtr depth not exc 10 sqm on plan and getting out in hard / dense soil complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for reinforced concrete pipes class NP-2 with socketed ends laid and jointed complete of 150mm bore incl demolition and breaking up RCC, SWG, CPVC drain pipes set in cement mortar complete all as specified and as directed. (Note :- Laying of sewage line in running sewage water & temporary diversion /plugged of existing sewage line & bailing of sewage water is the responsibility of contractor and the rate for the same is seems to be included in the contract)

M & L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore complete as specified and directed.

M&L for Precast cement concrete 1:2:4 type B1 set in CM 1:4 complete in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4. complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm in soils complete all as specified and as directed.

Removing the excavated materials exceeding 50mtr but not exc 250 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors/in earth of 110 mm dia including necessary fittings complete all as specified and directed

All as per Ser. item No. 95.00 above but 75mm bore complete all as specified and as directed.

Supply and fixing PVC vent cowl 110mm bore complete all as specified and as directed.

All as per Ser. item No. 97.00 above but 75mm bore complete all as specified and as directed.

Supply and fixing in repair rotational moulded polyethylene water storage tank 1000 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressure PTMT with rod & high density plastic ball and including dismantling of tank complete all as specified and directed.

Supply and fixing in repairs gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for size 25mm bore complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS- cable conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable with tripple layers protection drawn through in and including heavy duty , PVC concealed conduit of white/ ivory colour including all accessories after cutting chasing in wall of any type /ceiling etc, incl making good of disturbed surface and applying two coats of white / colour wash on disturbed surface to match the existing surfaces, with mild anodised/pressed steel sunken boxes with earth dolly duly, covered with hylem brand backelite sheet cover 3 mm thick, suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following.

One light/fan point controlled by one switch.

One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board.

One switch socket outlet point, 5 amps on the same board

All as per item No 101.00 above but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sqmm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and as directed.

Taking down point wiring (light, fan, socket or power) any type complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down old unserviceable /worn out DB,s any type and size complete all as specified and as directed.

Supply & fix switch piano single pole flush type 5 A, 240 volt one way complete all as specified and as directed.

Supply & fix switch socket combination 2 in 1 , 15 amps flush type complete all as specified and as directed.

Supply & fix switch socket combination 3 pin, 5/16 amps 5 in 1, flush type complete all as specified and as directed.

Supply & fix electronic fan regulator step type 2 module type 240 volts suitable for ceiling fan complete all as specified and as directed.

S&F ceiling rose surface type, three terminals complete all as specified and as directed.

S & F for Highly efficient LED Bulbs, 12 W, direct fit lamp, in B-22 cap PF>0.90 conforming to BAJAJ cat no- 830066 12 WATT CDL B22 OR equivalent in Wipro/PHILIPS complete all as specified and as directed.

Supplying and fixing LED light fitting, 1X20 Watt, 220V, AC decorative box type with driver, holder including LED tube light PF>0.90 connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED street light luminaries with pressure die cast housing with toughened glass with high power LEDs and unique peanut lens PF>0.90 deep drawn aluminium housing anodised inside and acrylic cover complete with 36 Watt in built control gear including twin core copper conductor for connection of security light fitting from ceiling rose and security light bracket made out of 25 mm dia GI pipe light grade,0.90 mtr long bend to shape 130 degree angle fixed to wall by two nos MS clamp made out of flat iron size 40 x 5 mm with nut bolts and washer complete all as directed by Engr in Charge. (Make :- CROMPTON cat No. LSTS-36-CDL-M or equivalent in Wipro/BAJAJ)

Taking down Ceiling fans of any size, removing to workshop for servicing, cleaning, lubricating, replacement of split pin, rubber bush and other spare required including cleaning old dust/grease, painting of the same with white enamelled paint with the help of spray gun including writing of MES no with black enamelled paint as directed by Engr-In-Charge at site fixing PVC cable with stranded copper conductor of size 0.75 Sqmm and refixing the fans at the same locations.

Supply and Fix in replacement canopy for ceiling fans (Set of two) complete all as specified and as directed.

Supply and Fix in replacement MS clamp with rubber reel, nuts, bolts, split pin etc suitable for 1200/1400 mm sweep ceiling fan complete all as specified and as directed.

M & L for Sub main wiring complete with two single core 6 sqmm ,1100volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 6 sqmm in and including caping casing including cutting chases, pinning in and making good to facings where required complete all as directed by Engineer-in-Charge. [Note:- 3 runs of 6 Sqmm conductor and one run of PVC casing caping shall be measured as one unit length.]

M & L for Sub main wiring complete with two single core 10 sqmm ,1100volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 10 sqmm in and including caping casing including cutting chases, pinning in and making good to facings where required complete all as directed by Engineer-in-Charge. [Note :- 3 runs of 10 Sqmm conductor and one run of PVC casing caping shall be measured as one unit length.]

Taking down Submain of any capacity size or any description complete all as specified and as directed.

S&F IP-43, IK 09, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 4 way, 12 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed in wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing as incomer will be measured seprately in relevant item. (Model :- Legrand cat No-5077 28 or equivalent in Schnieder, ABB, Havells etc)

Supply and Fix MCCB 63 Amps of thermal magnetic O/L & S/C protection, 25 KA, 4 Pole,415V, Ics=100% Icu, Breaking capacity of 25KA conforming to make Legrand Cat No 4200 53 Model DPX3 160 or equivalent in Scneider, ABB, Havells etc complete all as specified and as directed.

S&F MCB SPN DB 8 way of IP 43-IK 09 with metal door,double door, with 100 amp rated copper busbar 240 V, SPN recess mounted/wall mounted complete all as directed and specified by Engineer in charge.

S&F MCB SPN DB 4 way of IP 43-IK 09 with metal door,double door, with 100 amp rated copper busbar 240 V, SPN recess mounted/wall mounted complete all as directed and specified by Engineer in charge.

S&F MCB SP 6-32amps, 10KA, 'C' series complete all as specified and as directed.

S&F MCB SPN 20 to 40 amps,10KA, 240V,'C' series complete all as specified and as directed.

M & L for earthing with galvanised steel earth plate electrode 600 x 600 x 6.0 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to a depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc including dismantling of unsv earthing complete all as specified and directed by Engr-in-Charge. (Note : Rate is inclusive of GI earth wire upto 7.5mtr length and beyond 7.5 mtr shall be measured and paid separately).

M & L for fixing earth continuity conductor or main earth lead fixed to wall or burried in ground or drawn in GI pipe with 4 sqmm GI Wire complete all as specified and as directed.

Supply and fix plastic exhaust fan, noise free, AC single phase 230/ 240 volts of size 250 mm sweep, RPM 1200 and all fixing arrangements complete all as per the directions given by Engr-in-charge. (Make :- Bajaj cat part No-70049 or of equivalent in Philips/ Havells)

M&L for cutting and making hole into or through cement concrete or stone masonry wall or brick wall of thickness upto 45cm and in girth not exc. 45cm for fixing exhaust fan of size 300mm sweep & providing fastners grouted in wall four Nos inside for fixing of Exhaust fan and Four Nos outside for fixing of louvers and redressing the surface and making smooth with cement plaster 1:4 to match existing surface incl lime white wash complete all as specified and directed.

Anand Trading Co

Santosh Pandurang Pise

Gauri Associates

M/s Omkar Associates

Suma Construction

GS Associates

M/s.BAJRANG CONSTRUCTION

S G Enterprises

K D Electricals

GRACE CONSTRUCTIONS