Beautification and repair work in Anand Park Ward No 15 MC Panipat Recall

Air Walker: Providing, designing and fixing of AirWalker of size 100*550*1480mm fabricated with main post og 140mm dia and 3.00mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to br applied at all welding points prior to finishing. Base plate cover shall be made up of virgin LLDPE plastic by rotational moulding with minimum 4.00 mm thickness UV resistant and colour as approved by Engineer-in Charge. High quality grip rubber should be used on handles. Foothold shall be made of Nylon alloy with rounded edge to prevent impact and injury. Maintenance free bearing should be used in equipment manufactured by reputed company duly sealed and self lubricated to be approved by Engineer in Charge. Equipment to be fitted with inbuilt limiters. The equipment should be fixed on ground with concrete of minimum streength M25 and J shaped welded bolts. Including Contractor Profit, overhead charges, GST and all others charges.

Leg Press: Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 2000 X 550 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineerin-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per diection and approval of Engineer-inCharge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. .Including Contractor Profit, overhead charges, GST and all others charges

Seated Chest Press :- Providing, designing and fixing Seated Chest Press of Pull pair of size 1800 X 700 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all . Including Contractor Profit, overhead charges, GST and all others charges.

Supply, erection and installation of ISI mark uPVC corrugated sheet for roofing of gazebo with provision and fixing of sheet with J-bolts complete in the satisfaction of engineer-in-charge.

Supply and installation of Single Arm Bracket including Nut and Bolt for 8 mtr high GI Octagonal poles as per specifications of poles mentioned in the HSR

Supply and apply of EPRF factory made cushion Sheet of Size (900mmx1800mm) base of thickness 13 mm of density 150 kg per cubic Meter fixed with Hybrid water base PU adhesive , on surface of EPRF Cushion Sheet : one layer of Hybrid Polyester filament reinforcement and 2mm thick layer of Hybrid Water base Colored PU with high pressure spray machine with granules size 2-4mm sprayed to permanently embedded on top of EPRF. Final Clear Nano Coating for abrasion resistance . Total Top PU Layer will be Upto 2mm with Force reduction Upto 39% , Fiction /kid Resistance of 51 TRRL as per ASTM E524 , tensile strength of )-0.5MPa as per ASTM D638 and Elongation at break of )-40% as per ASTM D3759 . The Proposed system provides high durablity , required minimal maintenance , All weather suitable / friendly, ecco-friendly , Protective Against UV rays and available in Multi-color options .(Make:- MOLDO, UNICRETE)

Round shape LED Bollard 12Watt made of extruded aluminium body with PC diffuser. The Power Led`s are mounted on metal clad PCB`s and then LED`s and PCB assembly are mounted on extruded aluminium Heat sink and fitted with Led Driver. A UV stabilized frosted diffuser is provided for Glare Free Lighting with high visual comfort. (Makes: Havells, Surya,Bajaj, Twinkle, Jaguar)

SITC of DIN Type Astronomical Digital Time Switch with 1 CO: Astronomical programmable every 1 minute, backup of 6 years , 28 memory locations, currently capacity 16 Amp, with one changover, total 28 programs, 3 nos indication lamp with 1 nos toggle switch and 1 nos timer swicth with 5 years warrenty Make: LandT/Indi Asian/CandS

P and F Contactor as per NS MNX 125 with 5 years warranty Make: Make: Indo Asian/L and T/C and S

Supply of street light electric meter of 2 Kw capacity three phase and providing connection of street lights with the meter, payment to the contractor will be made as per actual slip received from the UHBVN