ADDITIONAL AMENITIES COURT POLLACHI

Amount

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Earth work OPEN EXCAVATION in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and filling in foundation and basement with Filling Crushed Stone Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation, basement with FILLING GRAVEL not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling 40mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers

Supplying and filling 20mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers

CEMENT CONCRETE 1:5:10 [One Cement, Five Crushed Stone Sand and Ten hard broken stone jelly] using 40 mm gauge hard broken granite stone jelly for FOUNDATION including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification.

CEMENT CONCRETE 1:5:10 [One cement, Five CS sand and Ten hard broken stone] using 40 mm gauge hard broken jelly for FLOORING including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. [The rate is inclusive of necessary planking for panelling wherever necessary and complete complying with standard specification and as directed by the departmental officers.

Supplying and erecting steel shuttering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as COLUMN FOOTINGS, COLUMN PEDESTALS, PLINTH BEAMS, GRADE BEAMS, STAIRCASE STEPS, etc., which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. [Payment for centering shall be given after the concrete is laid].

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height For plane surfaces as detailed below , in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid).

RCC FLOOR SLAB, ROOF SLAB, RECTANGULAR BEAMS, ELL BEAMS, LINTELS, LANDING WAIST SLAB, CONAPY SLABS BED BLOCKS etc.,

FOR PLANE SURFACES SUCH AS VERTICAL SLAB, SIDE SLABS OF BOXING, VERTICAL DROPS, FACIA, VERTICAL WALL, ETC.

FOR RECTANGULAR OR SQUARE RCC COLUMNS TOP AND BOTTOM SLABS OF RCC BOXING SILL SLAB AND SUNSHADES ETC.

FOR CIRCULAR COLUMNS, ETC.

Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers.

In Foundation and Basement

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/ms and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retad setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu'm') 7670 kg. of cs sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

In Foundation and Basement

For Superstructure in Ground Floor

For Superstructure in First Floor

For Superstructure in Second Floor

For Superstructure in Third Floor

Supplying, fabricating and placing in position MILD STEEL / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. [Contractor has to make his own arrangements for the supply of steel and binding wire]

BRICK WORK in Cement Mortar 1:6 [One Cement and Six crushed stone Sand] using best quality Fly Ash Bricks of size 23 x 11 x 7cm for the following including curing etc., complete complying with standard specifications. [Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost].

For Foundation and Basement

For Superstructure in Ground Floor

For Superstructure in Third Floor

BRICK WORK in Cement Mortar 1:5 [One Cement and Five crushed stone Sand] using best quality Fly Ash Bricks of size 23 x 11 x 7cm for the following including curing etc., complete complying with standard specifications. [Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost].

In Foundation and Basement

For Superstructure in Ground Floor

For Superstructure in First Floor

Supplying and fixing in position best quality PVC soil / waste pipes of 110mm dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

BRICK PARTITION walls of 11.00 cm thickness using best quality Fly Ash Bricks of size 23 x 11 x 7cm in Cement Mortar 1:3 [One Cement and CS Sand] using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers.

For Superstructure in First Floor

For Superstructure in Second Floor

For Superstructure in Third Floor

Providing GRANOLITHIC FLOOR finish of following thickness with Plain Cement Concrete 1:2:4 [One Cement, Two Crushed Stone Sand and Four Aggregate] using 10 to 12 mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc., complete complying with standard specification and as directed by the departmental officers. [The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers].

25mm thick

40mm thick

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Labour charges for providing full nosing to Granite stone slab for steps in all floors neatly and fixed in position so as to make it perfectly smooth and shining and to the alignment etc., complete complying with standard specification.

DADOOING walls granite tiles of synthetic grey, paradise, and similar varieties of suitable sizes in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

PLASTERING with Cement Mortar 1:5 (One cement and Five P-sand), 12mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

SPECIAL CEILING PLASTERING and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three P-Sand) 10mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 75mm thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.

Supplying and fixing in positon INDIAN WATER CLOSET (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two cs sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing Colour Galvanum sheet roof of 0.47mm thick and steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers.

Construction of INSPECTION CHAMBER clear sizes 0.60m X 0.60m including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five m sand] using best quality of Fly Ash Bricks of size 23x11x7cm with Plastering with Cement Mortar 1:3 [One Cement and Three P. Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three cs Sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.

Supplying and fixing of M.S.Grill of approved design for grill gate, grill work to doors and windows openings ramp etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification.

UPVC Window: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.

supplying and fixing of Hallow pressed steel door frames for single leaf and double leaved door using pressed steel frame of size 105x60mm using mild sheet of 1.25mm thick (18gauge) special profile extruded section.The pressed steel frame should be as per IS4351/1976.The rate in inclusive of bottom thehold fasts and provision to aldrip tower bolt hinges and lock plate etc,with one coat of zinc chnomate yellow primer and filling the inside hallow portion with cement concrete 1:2:4 using 20mm HBG stone jelly etc,complete complying with standard specification.

Manufacturing supplying and fixing of STEEL DOOR [SINGLE LEAF] with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x6mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts

2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter to conceal the gap between the two shutters at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete complying with standard specifications and as directed by the departmental officers.

ABS DOOR Specification: Providing and fixing of ABS (Acrolynitrile Butadiene Styrene) Door using factory made plain FPVC (Foamed Polyvinyl Chloride) door frame of the size 105 x 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 10 Nos. of 50mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners to be provided for each vertical member, stiffeners of („U‟ Channel of size 29 x 9 x 1mm, 150mm long) 3 Nos. at hinge point, frame reinforcement of („U‟ GI Channel of size 46 x 22 x 0.06mm), bottom tie rod of („U‟ GI Channel size of 15 x 15 x 1mm), the ABS Shutter of 35mm thick factory made plain pre-laminated. ABS (Acrolynitrile Butadiene Styrene) door shutter moulded in different designs, consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32 x 32mm - 2 Nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of ball bearing butterfly hinges - 3 Nos. for each shutter and ISI make SS round lock complete, including cost of Materials, conveyance and all other incidental charges and labour charges for fixing the Door neatly etc., complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work

Providing and complete work of Roof including MS frame work with Polycarbonate (Multiwalled Sheets) 10mm thickness, colour (clear), UV stabilized double coated 85% of Transmission with Aluminium Beading, L angle, Drilling screws, MS Structures, Silicon Paste, Cutting, welding, fitting, fabrication of works etc.

Providing expansion joint of 12.5mm wide in between RCC twin columns from top of pedastal to full height including filling the inner space with suitable non-absorbent, flexible and well compressible filler materials of approved quality and brand; finishing the sides of RCC columns with polysulphide sealents for a depth of 7.5mm on either side covering the inner space filled with filler materials as above etc., complete complying with standard specifications and as directed.[Ground Floor]

Providing and fixing elevation slab in Standardised Concrete mix M-20 Grade using 20mm HBG stone jelly of size 0.70 x 0.40 with top semi circular arch of size 0.30m dia. The rate including the centering the vertical slab steel fabrication. Standardised Concrete mix M-20 Grade and Vargapoochu with cement mortar 1:3 - 10mm thick etc., complete complying with standard specification.

Providing and finishing the front portico columns and finishing the portico arches with ornamental elevation works including cost of earthern centering and by proper shape by finishing the surface with Vargapoochu in CM 1:3 and providing Oranmental Grooves on columns and making the top surface smooth with Plaster of Paris including labour charges etc., complete as directed by the departmental officers.

Providing and finishing the Judge entry portico columns and finishing the portico arches with ornamental elevation works including cost of earthern centering and by proper shape by finishing the surface with Vargapoochu in CM 1:3 and providing Oranmental Grooves on columns and making the top surface smooth with Plaster of Paris including labour charges etc., complete as directed by the departmental officers.

Providing and finishing the Public entry portico columns and finishing the portico arches with ornamental elevation works including cost of earthern centering and by proper shape by finishing the surface with Vargapoochu in CM 1:3 and providing Oranmental Grooves on columns and making the top surface smooth with Plaster of Paris including labour charges etc., complete as directed by the departmental officers.

Supplying and fabricating of STEEL RECORD RACK of size 4'x1'6"x10' using 50X50X6 mm L angle for outer frame and 18 gauge sheet for rack 40X40X6mm with bottom stiffners as per specification. The steel record rack equally divided five compartments using 18 gauge sheet of best quality. The record racks ate inter connected with bolts and nuts,The rate including of all materials, labour charges loading and unloading and taxes etc,. The rate includes two coat of best quality synthetic enamel paints over a primer etc., Complete as direct by the departmental officers.

Providing Ornamental Dooms over roof using Standardised Concrete mix M-20 Grade in accordance with IS:456-2000 including necessary scaffolding at seven stages over initial stage and finished with Cement Mortar 1:1 20mm thick the size of turret is 60cm dia., conical portion 50cm Udukkai base with curve at edges placed over Concrete of size 80×80×30cm with ornamental finishing to a height 2.70m including cost of steel and cement etc., as shown in the drawing and giving two coats of emulsion paint finish to turret etc., complete as per standard specifications and as directed by the dept officers. [First Floor]

Providing Cup-board Shutter using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Manufacturing, supplying and fixing in position of the Tamil Nadu Government Emblem of dia 15" made upto 12mm thickness sheet including, computer designing, drawing, pattern making, moulding, grinding, painting, the emblem with national flag, inner MRF coating, painting, finishing and fixing the emblem etc., complete as directed by the department officers.

Supplying and fixing of Aluminium Dye Cast letters of following size to suit the Architectural elevation drawings given for the including Cost ,conveyance and all other materials and Labours involved etc., complete and as directed by the Department Officers.

Supplying of sofa set consisting of 1 no of three seater and 2 Nos of single seater made of indian rubber wood with the following specification, The frames are made of well seasoned rubber wood the uphoistery fabric. Cost includes cost of all materials, labour, erection, polish and all other incidental charges etc,.

Supply of country teapoy of size 0.90x0.60m rate is inclusive of materials, Furniture fittings Labours, loading, unloading and conveyance changes etc., complete and as directed by the departmental officers.

Manufacturing & Supplying of Teak wood Executive Table of size 5'x3'x2'6'' consisting of Teakwood Top fixed over box apron, cupboard on one side and 3 closed drawers on other side, Teakwood legs with side stretcher and foot rest. Drawers made out of Teak Wood Scantling. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc.

Supply of design printed Carpet of size 5'x7' made of best quality and approved materials etc, complete as directed by the department officers and as complying with standard specification.

Manufacturing & Supplying of TW Table of size 8' x 3' x 2'6" consisting of Teakwood Top fixed over box apron, Teakwood legs with side stretcher and foot rest. All wooden portion with polish finish. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc.

Manufacturing & Supplying of TW Accused Dock with Accused box. Barricade of oranamental type of 1.20m height with the following specifications and sizes ara 1) Vertical members made out of 90x90mm scantling. 2) Horizontal members are made out of 75x50mm scantlings. 3) Vertical oranamental member made out of 55x55mm. 4) Vertical oranamental member at 150mm interval. All wooden portion with polish finish. The cost 5)Hinged ornamental Door includes cost of all materials, labour, erection, polish and all other incidental charges etc.

Manufacturing & Supplying of Teak wood Executive Table of size 6'x3'x2'6'' consisting of Teakwood Top fixed over box apron, cupboard on one side and 3 closed drawers on other side, Teakwood legs with side stretcher and foot rest. Drawers made out of Teak Wood Scantling. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc.

Manufacturing & Supplying of TW Table of size 5'x3'x2'6'' consisting of Teakwood Top fixed over box apron with 4 drawers, Teakwood legs with side stretcher and foot rest. All wooden portion with polish finish. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc.

Manufacturing & Supplying of TW Table of size 6'x2'x2'6'' consisting of Teakwood Top fixed over box apron, Teakwood legs with side stretcher and foot rest. All wooden portion with polish finish. Foot rest will be fixed. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc.

Providing & Supplying of MDF Computer table of size 3'x1'6"x2'6'' with attached CPU and UPS trays keyboard drawer arrangements. with Retracting Keyboard tray. foot rest will be fixed. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc.

Supplying and fixing Teak Wood chair with Plastic cane knitted back and seat with arm rests, etc. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc.

Supplying and fixing Teak Wood chair with Plastic cane knitted back and seat with soft cushion, arm rests, etc. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc.

Supplying and fixing – Long wooden bench size of 6' x 1'6" x 1'6" with back rest etc. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc.

Manufacturing and supplying T.W. Witness Box with Barricade of ornamental type of 1.20m height with the following specifications and sizes are 1) Vertical members made out of 90x90mm scantling. 2) Horizontal members are made out of 75x50mm scantlings. 3) Vertical ornamental member made out of 55x55mm, 4) Vertical ornamental member at 150mm interval. All wooden portions with polish finish. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc., complete complying with standard specification.

Manufacturing and supplying Teak Wood Book Berow (3' x 6') made using teak wood scantling with double door, glass shutters with wooden frame. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc., complete complying with standard specification.

Manufacturing and supplying TW Dining table with single TW Chair with Plastic cane knitted back and seat with arm rests, etc., Teakwood legs, Plain table with polished top (4' x 3' x 2'6") made using teak wood scantling. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc., complete complying with standard specification.

Manufacturing and supplying of Teak wood Corner Almirah of 7' x 3' size having polished finish with 2 compartments for coat hanging along with lock arrangements having reflecting mirror on door. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc., complete complying with standard specification.

Book holder for Judge Chamber. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc., complete complying with standard specification.

Manufacturing and supplying of Teak wood study table of size 2'x1.25' having polished finish. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc., complete complying with standard specification.

Manufacturing & Supplying Steel Almirah of size 3'x6' having 5 compartment. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc., complete complying with standard specification.

Manufacturing & Supplying Steel Almirah of size 3'x6' having 4 compartment and an internal locker arrangement. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc., complete complying with standard specification.

Manufacturing & Supplying Teak wood tray of size 1.5'x1'x0.50' with holder on both sides. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc., complete complying with standard specification.

Manufacturing & Supplying Steel framed high rised plastic kane knitted revolving chair with arm rests. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc., complete complying with standard specification.

Manufacturing & Supplying Steel Short stool of size 1.25'x1.25'x1.50'. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc., complete complying with standard specification.

Manufacturing & Supplying of TW Barricade of oranamental type of 0.80m height. 1) Vertical members made out of 90x90mm scantlings. 2) Horizontal members are made out of 75x50mm Scantlings. 3) Vertical oranamental members made out of 55x55mm. 4) Vertical oranamental members at 150mm vertical. All wooden portions with polish finish,. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc.

Manufacturing & Supplying of TW Barricade of oranamental type with 3 Nos of 2 Hinged Door of 0.80m height. 1) Vertical members made out of 90x90mm scantlings. 2) Horizontal members are made out of 75x50mm Scantlings. 3) Vertical oranamental members made out of 55x55mm. 4) Vertical oranamental members at 150mm vertical. All wooden portions with polish finish,. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc.

Manufacturing and Supplying of six hook hanger cloth hanging pole wrought iran rack shelf standing unit.

Supplying of Cash Chest of 40 litre capacity. Godrej safire (40V) (Key Lock) (Fire Resistant Safe) of size (in cm) : 55(h)x 41.20(w) x 48.40(d) and weight: 61kg. The cost includes cost of all materials, labour, erection and all other incidental charges etc., complete complying with standard specification.

Light weight Aluminium heavy duty foldable ladder with Anti-skid arrangements of height 5.00'. The cost includes cost of all materials, labour, erection, polish and all other incidental charges etc., complete complying with standard specification.

Supplying and fixing of Automatic Door closing hinges

Supplying and Fixing MS Ladder width 45cm using 50x50x6mm MS Angle

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use.

Manufracturing and Supplying of Asian type 60L capacity wheel drawn trolly for carrying case files.

Manufracturing, Supplying and fixing of Vinyl name board of size 20"x5" at locations specified by the departmental officers.

ELECTRICAL ITEMS:

Supply,testing, commissioning and handing over of 1No, 250KVA Diesel generator set of 0.8PF, 3phase, 415Volts, 50Hz, 1500 RPM complete confirming CPCB IV + Norms and BIS specifications. A) ENGINE : Water cooled diesel engine suitable for generator application with a shaft out put of 310 BHP suitable at 1500 RPM under NTP conditions .The engine shall comprise the following standard scope of supply: 1) Dry type Air cleaner. 2) Expansion bellow. 3) Radiator, radiator fan and mounting. 4) Air to air charge cooler. 5) Exhaust gas turbo charger. 6) Lube oil cooler and lube oil filter. 7) Fuel filter (pre and micro). 8) In-line mono-block fuel injection pump with governor and fuel feed pump. 9) Electronic governor. 10) 12V/ 24V battery charging alternator. 11) 12V/ 24V Volt electric starter motor. 12) Engine test certificate. 13) Residential Mufler. 14) Fly wheel with starter ring.

Engine instrument panel/ mounting: Engine control panel consisting of ON/ OFF/ START/ KEY, lube oil pressure gauge, oil temperature gauge, high water temperature gauge and electronic hour meter and RPM indicator. Safety system of Engine: The engines shall trip for the following conditions with Visual alarm device. 1) Low lubricating oil pressure. 2) High water temperature . 3) Vee - belt failure and over speed. 4) Low battery indication. The Engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load.

B) ALTERNATOR : 250KVA/200KW capacity of Brushless Alternator AC 3phase, 50HZ, 415Volts, 0.8P.F, 4 wire self exited,self regulated designto run at 1500 RPM under NTP conditions conforming to IS 13364 (part-II) 1992 to be coupled directly to the Diesel engine and test certificate.C)After Treatment System-The After treatment system should include SCR,DEF lines,DEF supply & DEF Tank D) AMF CONTROL PANEL: The AMF control panel (cubical) should be fabricated with vermin proof and dust proof best quality sheet steel and floor mounted with removable rear panels and hinged front doors with enamel painted and incorporating the following with suitable provision for connecting incoming and outgoing leads have been made on the control panel complete set.

Note: 1. The control panel should be complete with necessary fuses, cables, labels, other accessories with neutral isolation arrangements. 2. The engine should trip for the following conditions. a) Low lubricating oil pressure, b) High water temperature, c) Over speed. 3.Supply and fitment of Auto mains failure panel to EB service with 400Amps switch and contactors with scuf control relays, timers etc.

E) ACOUSTIC ENCLOSURE : Acoustic enclosure shall be powder coated and fabricated of 16SWG CRCA MS sheet. The silent canopy shall be nut bolt type construction. Critical processes of punching are done on CNC machine to maintain dimensional accuracy of hole within 0.1mm, powder coating done after seven-tank surface preparation process of sheet metal. Canopy panel and door shall have inside lining of FIRE-RETARDANT 64kg/m density mineral wool of 100mm thickness as acoustic material. Four hinged doors shall be provided to canopy.

The maximum permissble sound pressure level should be as per the norms prescribed by the Central Pollution Control Board/ State Pollution Control Board/ Competent Authority concerened or should be within 75 db(A) at 1 meter from the enclosure surface whichever is advantageous to the department. The emergency stop should be available on the enclosure panel. The enclosure provided shall be duly approved by the Engine Manufacturer of the Engine provided for Diesel Generator Set mounted inside and should be to the satisfaction of inspection/ testing authority concerned. SURFACE TREATMENT – PAINTING : The enclosure shall be suitably treated for degreasing, de-rusting and phosphating. The canopies are passed through seven-tank treatment thoroughly. ADDITIONAL FEATURES OF CANOPIES Canopy fabricated on CNC machines with dimensional accuracy of 0.1mm so as to increase its durability. Special designed supporting rips/structures are used in canopies so as to give sturdiness and to reduce the vibrations of the DG sets if any. WORLD CLASS COOLING PACKAGE: Canopies shall have cooling package for which it can perform at 45 deg C ambient temperature. No grounding required on the ground, only a level surface capable of with standing the DG weight. Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set. The Gen set frame shall also be provided with hooks for unloading. Temperature rise inside the canopy: Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at cleaner within the enclosure well with in 5-7 deg centigrade.

Base Frame Base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall have provision for mounting of acoustic enclosure on it. The supply of Gen set includes loading, unloading and transportation charges. E) Fuel Tank Removable Fuel tank of atleast 440 Ltrs capacity shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connections and mechanical fuel gauge. Fuel tank can be easily removed for cleaning or any maintenance. First charging of fuel oil to full capacity and first charging of battery while handing over to the department. Also supply of fuel oil to run the genset for a minimum of 8hours on load or by using rheostat. F) Battery 2Nos 12V 180 AH battery (Make : Ashok Leyland/ Kirloskar/ Cummins/ Greaves/ Equivalent) G) Tools: Supply of tools like 15" cutting plier - 1No, Screw Driver 9" & 6" - 2No, DE Spanners (6Nos) - 1set, Adjustable spanner - 1no, 1/2 lb Hammer - 1No, Spanner for removing engine oil plug - 1No, Line Tester - 1No for the maintenance and operation of Generator set.

Erection of Gen set: Providing suitable concrete foundation of 1 Metre height above the ground level with cement concrete 1:2:4 with sand cushion all around the foundation for erection of 250KVA Diesel Generator set and erection of generator set with proper alignment over the foundation to suit Genset fountation size.

Supply and installation of exhaust piping of sufficient length with suitable MS pipe so as to extend outside the generator with necessary thermal insulation.

Supply and laying of 2 R x 3½ x 185 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre and the cable inserted in suitable 65mm dia GI pipe "B" class and covering the cable completely and refilling the earth to make good.

Supply and clamping of 2 R x 3½x 185 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3½x185 sq.mm LTUG armoured cable with earth connection

Supply and providing cable end termination of 3 1/2 x 185 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry .

Supply and fixing of 3000 VA (3.0KVA) UPS system with 4Nos. 12V, 150AH (Exide IT 500) with 2 hour back up and 48 months warranty for mentioned capacity fully load operation & the following Feature.(Make: Numeric/Exide/Microtek/Equivalent).

a. Inverter shall be free from workmanship defects sharp edges,nicks,scratches,burs etc..All fasterners shall be fixed properly.The equipments shall be complete with all parts and all parts shall be Functional. b. Enclosure shall conform to protection requirement of IRL to IS 13947(Part 1) 1993 c.Switching Device shall be MOSFET(or)IGBT

d. Switching frequency shall be above 50 HZ Single Phase AC II. Input 120V to 260V 50 HZ single phase AC III.Output: The variation in Output Voltage from No-Load to Full load voltage shall not exceed +1.5% over +10% and 20% variation of the rated DC input Voltage.The frequency of the Output voltage shall be 50HZ +/- 1.3% IV. Inverter Efficiency minimum 85% as per CIT 93 of ISS.

V. Over Load:Inverter Shall withstand 10% overload for atleast 10 minutes. VI. Protections a. When the Input voltage goes outside the range 120 to 260 Volts ,the system shall switch over to inverter mode b. Over voltage short circuit and over load Protection at inverter output terminals. c. Battery Reverses Polarity. d.Protection against over discharge

The load shall be cut off soon as the voltage of the battery terminal falls below. i) 10.5V for 12V and II) 21v for 24V battery system. e. The inverter shall incorporate an arrangements for automatic change over of load from main supply to the inverter AC output in case of failure of mains supply with correct pending indication as per cl.5.6 of IS 13314/1992 f.Inverter should have surge protection also.

VII.Indicators a.Following indicators shall be provided. 1. Mains presence. 2. Mains mode 3. Battery charging. 4. Inverter mode 5. Battery Low. VIII. Battery Bank: 8 Nos Lead Acid Battery conforming to IS 7372(1995) with amdts. No.1,2&3 and shall be of reputed make . IX. Angle Iron Frame Battery Stand with Wheel.

Supply, erection, testing and commissioning of five star rated 2.0TR (6500K cal/ hr) ABS plastic split type Air conditioner confirming to IS 1391 [part 2] 1992 with rotary compressor operating on refrigerent R-22 / Non CFL suitable for wall mounting for operation on 230V 50Hz single phase AC supply as per BEE specification and capable of performing the following functions.

A) Cooling B) Dehumidifying C) Air Circulating D) Filtering The installation work for the above split type AC units includes the following. 1. Mounting / Fitting indoor and outdoor units at their respective location.

2. Laying refrigent pipe line of 6 Mtrs distance to connect both units after drilling hole/ holes in the wall . Required thickness of the copper tubing shall not be less than 0.7 mm.

3. Insulating the suction pipe with expanded polythene foam 5mm thick tubing 4. Laying 15mm dia flexible PVC drain pipe of 6 mts length to throw out the condensate water being formed in the in door unit 5. Leak testing the entire gas unit 6. Charging refrigent gas in the unit 7. Suitable electric wiring to be provided with 2.5sqmm PVC insulated copper wire between indoor and outdoor units up to 4mtrs length and up to switch within 3mtrs of location of indoor unit (MAKe : Voltas/ Blue Star/ Eqvt).

Supply and fixing of 5 KVA Automatic Voltage Stabilizer, Double Booster with 3 minutes time delay, safety relay arrangements with high low input operating voltage range 140V to 270V and output 200V to 240V with all connecting cables with connections. (Make: V-Guard/Equivalent)

Supply and fixing of MS stand for fixing outdoor unit.

Supply and Laying of 5/8" and 3/8" Copper pipe covered with foam insulation from indoor unit to outdoor unit.

Supply and fixing of water drain pipe line (1"PVC Pipe).

Design, Engineering, Supply, Fabrication, Erection, Testing, Commissioning, handing over, obtaining erection permission from the CEIG, obtaining lift insurance, obtaining lift licence and obtaining safety certificate and handing over of 1 No. 8 Persons capacity Gearless lift without machine room (SR) complete with the following specifications.

I. General Number of Lift : 1 No. (a) Capacity and type: 8 Persons (544 Kgs) Capacity Passenger lift.(Gearless Lift without Machine Room) ( b) Speed : 1.00 Mtr / Sec. with ARD (c) Drive : Micro Processor based Specific Variable Voltage Variable Frequency (VVVF) Drive with enhanced ride comfort and near Zero Levelling Functions.

(d) Size of Lift well : 2200 x 1700 (mm Wide x mm length ) (e) No. of floors : 2 (Ground + 1 Upper floors ) (f) Total height of Travel : 4 Mtrs (Approx.) (g) No.of stops : TWO (Ground, I) (h) No. of Landing Entrance : TWO (Ground, I) (i) Construction of lift well : R.C.C. with brick masonry / Brick well and at Top of well for a height of 1.5mtrs RCC masonry for two sides of walls (j) Power supply : AC 400 / 440 Volts, 3 phase, 50 Cycles. (k) Auxiliary supply : 230V, AC supply ( Single phase ) (l) Position of machinery : Directly above the Lift Level.

(m) Lift pit depth : 1600mm (n) Leveling accuracy : High level accuracy with smooth & jerk free stopping. II. CAR a. Size of Lift Car inside : 1300 x 1100 x 2200 ( mm Wide x mm Depthx mm height ) b. Design of lift car : Stainless Steel (1.5mm- No.4 Hairline finish car panel c. Car ceiling : SS false ceiling d. Car floor : Granite / Marble flooring

with Automatic charging device, Up / Down Digital direction indications at all landings and in car. VI. SPECIAL FEATURE : Digital position indicator in Car and landings. Battery operated Emergency light and Alarm bell, call register signal and VF Door operator, false ceiling in car, Infra red door screen, Vandal proof SS Button with SS cover and with Automatic Rescue Device, Fire mans switch, Intercom provisions with Instruments and floor Annunciator with Music. VII. Automatic Rescue Device ( ARD ) : To facilitate landing of lift to the nearest floor at the time of power failure. This shall consist of suitable type battery system with charger, inverter, under voltage protection system etc., complete with all accessories. VIII. MINOR BUILDER WORK : To be Provided by the lift Contractor IX. SCAFFOLDING WORKS : To be Provided by the lift Contractor X.STAINLESS STEEL ANGLES AND FACIA PLATES: To be Provided by the lift Contractor

XI. OTHER INCLUSIONS : Over speed Governor, phase failure and phase reversal relay, alarm bell, T. Guide brackets for car and counter weights, rubber padding under winding unit, Motor of adequate 7.5 HP capacity, single reduction worm Gear, electro magnetic brake with compression springs, car safety device, buffer, electro mechanical door locks, tubular S.S hand rail in car. Infrared door sensors, Emergency key, motor over load protection devices, final limit switch, position and direction indicators for car and landing entrances, main suspension ropes, counter weights, lifting joists for mounting the machines, S.S. facial plate for car operating panel & landing fixtures, fireman's switch and other necessary controls - complete set.

Architraves covering all the 3 sides of the entrance door with 3mm thick decolam sheet with cardboard upto a height of 1.5 mtrs from the sil level. Supply of operation and maintenance manual with necessary tools for operation. The list of tools required should be detailed by the contractor in a separate format should duly signed by the contractor. Guarantee : Guarantee at least for one year for the materials and workmanship of equipments should be offered by the Lift contractor. Site testing in accordance with IS 14665 should be carried out at the time of Handing over to the User department.

Supply and fixing of 1000W automatic electric water heater of 25 litres capacity suitable for 230V 50 c/s AC supply on suitable MS clamps with 3 core flex wire,but without plumbing work.

Supply and fixing of 1no./6A two module socket, 1no. 6A one module switch on suitable module surface mounting box (GI) with module cover plate (plastic) on wall with connections.Higher End.

Supply and fixing of WT bulk head fitting with guard suitable for 9W LED lamp.

Supply and run of 3 of 2.5 sqmm (36/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable heavy gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm wire with painting of suitable colour. (For Lift Well Light Control)

Supply and Fixing of 16A Two-way switch in suitable MS box on wall with earth connection.(HIGHER END)

Supply and Fixing of Metal one way FP Enclosure with 63A FP RCBO on wall with earth connection.(HIGHER END)

Supply and clamping of 3½x25 sqmm. PVC armoured LTUG cable on wall/post with MS clamps.

Supply and providing cable end termination of 3½x25 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Supply and fixing of brass cable gland for 3½x25 sq.mm LTUG armoured cable with earth connection

Supply and fixing of Vertical 4 ways Triple pole and neutral MCB distribution board made out of sheet steel / alu. rail complete with bus bar arrangements incorporating the following controls with double door arrangements [IP 42 Metal door of Legrand] on wall with earth connection. (1)63A 4P MCB as Incoming :1 No. (2) 32A/40A TP MCB as outgoing :2 Nos. (2) 32A SP MCB as outgoing :2 Nos.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End.

Supply and clamping of 3½x35 sqmm. PVC armoured LTUG cable on wall/post with MS clamps.

Supply and laying of 3½x35 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre and the cable inserted in suitable 40mm dia GI pipe "B" class and covering the cable completely and refilling the earth to make good.

Supply and providing cable end termination of 3½x35 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.

Supply and fixing of brass cable gland for 3½x35 sq.mm LTUG armoured cable with earth connection.

Supply and fixing of 63A TPN MC switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2"x1-1/2"x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos.63A fuse units (500V),1 No.neutral link,copper earth flat of size 1"x1/4"with inter connection of EB meter of use units by 7/16 PVC insulated copper wire with earth connection complete

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply and clamping of 3½ x 50 sqmm. PVC armoured LTUG cable on wall/post with MS clamps.

Supply and providing cable end termination of 3½ x 50 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.

Supply and fixing of brass cable gland for 3½x50 sq.mm LTUG armoured cable with earth connection.

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply, Erection, Testing & Commissioning of 400A Capacity ATS Dust & Vermin proof cubicle panel made out of 16SWG CRCA sheet steel enclosure with supply & fixing of the following interior mounting fuse switches with HRC fuses with a central bus bars chamber & two numbers of Horizontal cable chamber at top and bottom. 1 No 400A FP MCCB as incomer . Outgoings: 100A FP MCB with 100A FP ATS Switch - 1No. 63A FP MCB with 100A FP ATS Switch - 13Nos

The bus bar chamber consist of 2Rx25mmx6mm Copper flat for three phases and neutral and also for interconnection for 400A MCCB switch. The interconnection with the bus bars to the 100A FP MCB with 100A FP ATS Switches with 25mmx6mm Copper flat. The interconnection with the bus bars to the 63A FP MCB with 63 A FP ATS Switches with No.8 SWG Copper Conductor and Double earth connection to all the switches should be done using No.8 SWG Copper conductor. The buses should be mounted on the SMC bus insulator at proper & sufficient spacing between the buses as per IE rules.

The bus bar chamber should be segregated from the adjacent chamber by providing hylem sheet of 6mm thick as partition 2 runs of 25mm x 3 mm copper flat should be provided all around the panel for earth connection. Phase & Neutral copper buses should be provided with heat shrinkable sleeves using RYB & Black colours. Indicator lamps should be provided with toggle switches & Bakelite fuse unit.

The Panel should be mounted on angle iron frame work of size 3"x1½"x¼" MS channel provided all around the sides of the panel. The whole arrangements should be erected on a suitable masonary pedastal. (All Switches should be with ISI mark and of Higher End make only).

RADIO ITEMS:

Supply and installation of 30W Wall Mount speaker with suitable wall mount bracket (Higher end).

Supply of 240 watts mixer Power Amplifier (Higher end).

Supply of 18'' inch goose neck microphone with base and ON / OFF switch indicator .(Higher end).

Supply and installation of Dynamic Cardroid Wired Professional speech microphone with superior quality of chrome plating/powder coated 4/8” Height adjustable Microphone DGN Stand..(Higher end).

Supply and run of 1.5 Sq.mm Speaker cable in suitable PVC rigid pipe on wall and ceiling with painting of suitable colour.

Supply and run of 8 Core 1.5 sq.mm PVC Copper Conference cable/3 core (Higher end).

Supply and installation of Handheld/ Collar type wireless perceptional microphone with wide frequency response of 50-16,000Hz and and receiver.(Higher end).

Supply and installation of 8 Pin Conference Mic Socket / XLR Connector/ with Modular Box and Front Plate heavy duty including soldering of work.

Supply and fixing of 230 V operation 1 KVA Voltage AUDIO stabilizer with manul regulator audio equipments (Higher end).

Supply and installation of 12 Channel Analog Mixer With 6 Mic / Line with high quality USB MP3 Player,Phantom and Bluetooth on board(Higher end).

Supply and installation 12U three tier MS Rack for housing LAN Switches with top and Bottom Cable Entry provision along with necessary power distribution unit,cable manager,fan and Lockable Toughened Glass Door.

Supply and installation of ISDN compatible EPABX System configured with 6 Trunk, ,10 SIP Trunk lines , 64 analog extensions which is expandable upto 96 analog extensions. (Higher end).

Supply and fixing of 24 Key digital instrument. (Higher end).

Supply & Fixing of Caller ID telephone with speaker tone/pulse Switchable redial ,flash..(Higher end).

Supply & Fixing of Basic telephone without Caller ID consists of speaker tone/pulse Switchable redial ,flash.(Higher end).

Supply & laying of 2 pairs PVC telephone cable of 0.5 mm in PVC rigid pipe on the wall with necessary connection.

Supply & laying of 10 pairs PVC telephone cable of 0.5 mm in PVC rigid pipe on the wall with necessary connection.

Supply and fixing of MDF(Main Distribution Box) with fixing arrangements Krone type 10 pairs with suitable MS box with lock & key (Higher end).

Supply and fixing of MDF(Main Distribution Box) with fixing arrangements Krone type 100 pairs with suitable MS box with lock & key (Higher end).

Supply and fixing of RJ11 I/O Socket for telephone instrument.

Supply, fixing and testing of 1 KVA online UPS with DC Voltage 36V with 2 HOURS BACK-UP,Power Factor ≥ 0.99 @ full load and Exide Powersafe Plus SMF battery: 12v - 65AH in 3 Nos and one layer wooden/steel fabricated stand.(Higher end).

Earthing as per the ISI specification with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mmx50mmx6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and run of 1 of No.8 SWG GI wire for earth connection.

BLUELEAF PROJECTS PRIVATE LIMITED (BID ID -1122096)

SRI EZHUMALAIYAN CONSTRUCTION (BID ID -1124222)