Construction work of Minor bridge of 8.30 X 4 meter span on Shivpur Kuberstan Road Km-6.200 link road in district Kushinagar

Diversion Work:- Earthwork in embankment for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.( 30 Mt Lead and 150 M Lift) S.I. No 251(GST will be paid extra as applicable)

Providing and laying of 1000 mm dia Hume Pipe(GST will be paid extra as applicable)

Construction of granular sub-base by providing Close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401.(GST will be paid extra as applicable)

Dismantling Work:- Dismantling brick work or stone work in lime or cement mortar and including stacking of material as directed by the Engineer in charge within a distance of 60 m (200 ft.) . (GST will be paid extra as applicable)

Dismantling reinforced cement concrete or reinforced brick work including stacking of material as directed by the Engineer in charge within a distance of 60 m (200 ft.) (GST will be paid extra as applicable)

Bridge Work:- Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.(GST will be paid extra as applicable)

Providing concrete for plain/reinforced concrete 1:3:6 in open foundations complete as per drawings and technical specifications As per SOR 279(a)(GST will be paid extra as applicable)

RCC Grade M30 Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications(GST will be paid extra as applicable)

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M30 using batching plant transit mixer & manual placing complete as per Drawing and Technical Specifications(GST will be paid extra as applicable)

Plain/Reinforced Cement Concrete in Super structure complete as per Drawing and Technical Specifications. RCC Grade M30 using batching plant transit mixer & manual placing (GST will be paid extra as applicable)

Providing and fabrication, transportation, storing, binding and fixing in position uncoated HYSD bar reinforcement in foundation all complete as per drawing and technical specification 1600, 2100. as per SI No 504(GST will be paid extra as applicable)

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M35 using batching plant transit mixer & Concrete pump including supply of all material, labour T&P etc. for proper completion of work.(GST will be paid extra as applicable)

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm Dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications (GST will be paid extra as applicable)

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of Mort specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. (GST will be paid extra as applicable)

Laying 20mm thick Ashphaltic plug expansion joint (GST will be paid extra as applicable)

Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.(GST will be paid extra as applicable)

Drainage Spouts complete as per drawing and Technical Specification(GST will be paid extra as applicable)

Road Work- Earth work in embankment with ordinary soil (loam, Clay, Sand) excavation should be in the form of regular pits not exceeding 50 Cm in depth and earthwork on embankment to be in 20 Cm thick layers including the ramming and dressing the surface to require levels and slopes and also including 1.5m lift and 30m lead. the earh in cutting to be used in making embankment oe to be disposits as spoil bank within 30m distance as directed by E/I.(GST will be paid extra as applicable)

Providing, laying and spreading material on a prepared Sub grade adding cement @ 2% by weight to the spread material manually mixing in place Rotavator and compacting with the road roller at OMC to achieve the desired unconfined Compressive strength and to form a Layer of Sub Base.(GST will be paid extra as applicable)

Providing, laying and spreading material on a prepared Sub Base, cement @ 4% by weight to the spread material manually mixing in place Rotavator and compacting with the road roller at OMC to achieve the desired unconfined Compressive strength and to form a Layer of Base.(GST will be paid extra as applicable)

Providing and applying tack coat with emulsion/bitumen (VG-10) using emulsion/bitumen pressure distributor at the rate of 0.35 kg per sqm on the prepared bituminous/granular surface treated with primer & cleaned with hydraulic broom as per Technical Specification Clause 503 (Including all taxes required & including Cost of bitumen VG-10)(GST will be paid extra as applicable)

Providing laying & rolling of open graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line ,grade and level to serve as wearing course on a previously prepared baIncluding all taxes required and hire charges of road roller & including Cost of bitumen )(GST will be paid extra as applicable)

Providing and laying seal coat by Manual means with Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510.(GST will be paid extra as applicable) including labour cess.

Protection Work:- Excavation of foundation in ordinary soil (Ioam clay or sand) including lift up to 1.50 meter and lead up to 30meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge up to a distance of 30 meters from the foundation trenches.as per S.I. No. 251(GST will be paid extra as applicable)

Providing and laying stone boulder pitching on apron and toe laid over dry bed including boulder as per drawing and Technical specifications .(GST will be paid extra as applicable)

Please Enable Macros to View BoQ information