Renovtion of Pump House Building

Amount

Earth work in excavation in foundations, trenches etc.in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation. (As per CSR 2020 item No. 6.6)

Removing Doors and Windows (Steel or wood)with chowkhats by making recesses in walls when the wall is not to be dismantled.as,per CSR 2020 item No.8.26.

(a) Doors of area 3 sqm and below

(b) Windows of area 3 sqm and below

Dismantling cement conglomerate floors (25mm to 50mm) thick including concrete base. ( As per CSR 2020 item No.8.16)

Dismantling glazed tiles (to be carefully removed).As per CSR 2020 item No. 8.35.

Scraping cement Plaster ( As per CSR 2020 item No.8.31)

12.5 mm thick cement plaster 1:4. (As petr CSR 2020 item No.15.9)

P/Laying conglomirate floor 40 mm thick cement concrete topping 1:2:4. ( As per CSR 2020 item No. 14.6) using mechenical mixer volumitric type for mixing of material.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid for separately) (As per CSR 2020 item No.17.45

(a)For fixed portion and chaukhats

(b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Pre-laminated particle board with decorative lamination on one side.( As per CSR 2020 item No. 17.46 (i)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)As per CSR item No. 17.47(ii)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 310 x 450 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (As per CSR 2020 item No.14.127)

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in12.5mm thick cement plaster 1:3 in base andjointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. As per CSR 2020 item No. 14.72.

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. As per CSR 2020 item No. 30.4)

Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect. ( As per CSR 2020 item No.30.15 )

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.As per CSR 2020 item No. 30.32 (i)

Providing & fixing CPVC (Chlorinate Polyvinyl Chloride) FlowGuard CTS SDR 11 pipes conforming to IS 15778 , for Hot & Cold Water Supply including jointing of all Flow Guard Plain & brass threaded fittings with Flow Guard Solvent Cement , testing of joints, also cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.( As per CSR 2020 item No.28.19 b ) SDR 11 CPVC pipes & fittings 20 mm o/d

White washing (Two coats) As per CSR 2020 item No. 16.2

Preparation of plaster surfaces for distempering including surface applying filling with approved qualitry filler consisting of plaster of paris or chalk Mitti including finishing the surface to the required finish complete . As per CSR item No. 16.6.

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade. As per CSR 2020 item No. 16.10.

Painting two coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. As per CSR 2020 item No. 16.19

Cement Concrete 1:8:16 with brick ballast 40mm gauge mixing by manual means (As per CSR 2020 item No.10.6 a )

Conglomerate floor 50mm thick cement concrete topping 1:2:4.( As per CSR 2020 item No.14.7) using mechenical mixer for mixing of material.

Dismantling brick work tile masonary or tile lining.( As per CSR 2020 item No.8.5 b)

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth. ( As per CSR 2020 item No. 11.5)

Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50 m lead (The cost of new tiles or bricks excluded).As per CSR item No. 31.11

Providing and laying LDPE (low density Polyethylene sheets) 0ver roofing before laying of roof tiles having thickness of 200 micron including cutting, jointing (heat seal jointing with hot iron) and over lapping of minimum 150 mm and CC gola 75 mm wide, complete in all respect to the satisfaction/ approval of Engineer- in- charge.(N.S. item)

Supply of Ist quality new tiles 22.86 x11.43 x 3.81 cm As per CSR (M-12 ( C)

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. ( Ref. CSR 2020 item No.13.55)

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.(As per CSR item No.13.45)

REPLACEMENT OF WIRES, SHEETS, SWITCHES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH FLUSH PIANO TYPE ACCESSORIES)Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp., 16Amp. universal sockets, 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Brass Screws, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material and repair of chases (with finsihing the surface):- (Derived From CSR 34.03)As per CSR item No.34.08A)

Wiring fan point (Without fan box)

Wiring light point

Wiring 6Amp. wall socket point

Wiring 16/20Amp. power plug control point

NARENDER SINGH CONTRACTOR

TANUJ AGARWAL CONTRACTOR

Chirakshi Construction Co.