Renovation and Furnishing of Existing Water Quality Lab of Thane .(Hydrology Project Division, Kalwa, Thane)

Amount

Part -I Civil Works

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc. complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Manual Means

Removing G.I. or A.C sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete.

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.

Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. complete.

Removing cement tiles, or marble or polished Shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete.

Removing earthen, stoneware pipes and stacking them as directed with all leads, lifts etc. complete.Brick work in C.M 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete

Removing Urinal Pans or Wash hand basin with frame including disconnecting the sanitary and water supply connections. removing the same carefully and stacking the serviceable materials as and unserviceable materials out side etc. complete.where directed including throwing the unservisable material outsides.

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm. to 20cm. including watering and compaction etc. complete. wherever necessary, curing, etc. complete.

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing and casting in situ cement concrete in M15 of trap/ granite/ quartzite/ gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer . . With natural sand.

Providing and fixing 6/- mm thick ISI mark Asbestos Cement Corrugated sheet roofing including galvanised iron 'J' or 'L' hook bolts galvanised iron band bituminous G.I. washers, galvanised iron clamps, bolts, nuts and scaffolding etc. complete.

Providing second class Burnt Brick masonry with conventional/ I.S.type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete.

Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc.complete.

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 section 92 x 31.75 x 1.30 mm at weight mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With Colour Anodising with box.

Providing and fixing 75 mm diastabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete

Providing &fixing flushing tank PVC 10 liters with fittings, inlet pipe with stop tap, brackets for fixing the cistern,32 mm dia. PVC flush pipe with fitting including lead soil pipe ,lead trap & soil pipe connection up to the outside face of wall.

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm of Nirali or equivalent make incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete

Providing and laying in trenches 15 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes of 1.48 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anticorrosive oil paint , 2 coats complete.

Providing and applying one coat of seal cement primer of approved manufacture and shed including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding etc. complete.

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to old & new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete.

Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Providing and fixing welded mesh Jali for Windows including welding and oil painting etc. complete.

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres.

Providing and casting MS cover to Water Tank with all accessories.

Providing and fixing 100 mm dia. Chromium plated brass showers rose to 15 mm dia. Supply pipe including necessary bend and socket complete.

Providing & constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete etc. complete with R.C.C. Cover.

Providing and fixing in position C.C.T.W. brackets for weather sheds of section 70 x 45 mm with mortise and tenon joinery at 1.2 to 1.5 metre center to center or as directed and teak wood battens of required section, including fixing three numbers of iron nut and bolts to each bracket, necessary scaffolding and two coats of painting to wood work etc. complete.

Providing and fixing 22 B.W.G. plain galvanised iron sheets on top of weather shed, including scaffolding, fixing by means of nut and bolts or as directed etc. complete. (Brackets of 70 x 45 mm to be paid separately)

Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete.

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete

Add royalty Charges for Sand Metal etc.

Part II Electric Work for Water Quality Lab

Point wiring for light/fan/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/HW

Wiring forplug on board with Switch socket with copperwiring and earthingas per specification No:WG-PW/SW

Supplying & erecting mains with 3x2.5 sq.mm F.R.copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting mains with 2x1.5 Sq.mm F.R. stranded/solid copper PVC insulated wire laid in provided conduit/ trunking / inside pole / Bus bars or any other places as per specification No: WGMA/ BW

Supplying, erecting & marking DPMCB 6A to 32A, C-series(for motor/power) in provided distribution board as per specification No. SW-SWR/MCB

Supplying and erecting modular type 3 pin 6 / 16A multisocket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6 A multisocket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected in an approved manner.

Supplying and erecting PVC Surface modular switch box with double mounting plate for4 module duly erected in an approved manner.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected in an approved manner.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 8 module duly erected in an approved manner.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 12module duly erected in an approved manner.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 16 module duly erected in an approved manner.

Supplying and erecting modular type switch 6A/10A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Providing, erecting & commissioning RCCB of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 63A. 2 pole complete as per specification No. SWRCCB/RCCB

Providing & erecting 3 Pole MCCB up to 100A, 415Vcapacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB

Supplying, erecting & marking DPMCB 6 Amp to 32 Amp B series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting 16 / 20 / 25 A starter (modular range) 2 module for AC unit on provided box complete & duly concealed with necessary material and connected.

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP (24 Poles)/TP (8 Poles) MCB of 8 ways (24 Poles) on iron frame/laminated board. (Vertical Busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting Iron, sheet metal work consisting of CRCA Sheets, Various sections of iron, Plates, Chequered Plates, Rods, Bars, MS pipes, etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Refilling the holes for dismantled point wiring with cement mortar & finishing in an approved manner.

Dismantling the existing light, fan, bell, clock, independent plug point, wiring with mains of all types along with accessories etc. Complete as per specification No: WGPW/ DM

Supplying and erecting street light Wall bracket made from 25 mm.dia ‘B’class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB

supplying and erecting LED street light fitting 12 to 18 W,with PF > 0.95 class IP 65 and above Housing of pressure diecast alluminium alloy and heat sink extruded alluminium complete as per specification No: FG-ODF/FLS-2

Supplying and erecting PVC trunking (PVC casing-n capping)of size 25 mm with accessories on wall/ceiling asper specification No: WG-MA/CON, para no. 1.1.2

Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings as per specification No. FF-PP

Supplying and erecting modular type blanking plate one module ISI mark approved make duly erected on provided plate & box.

Supplying and erecting five star rated energy saving Ceiling fan230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying & erecting LED 20W tube light fitting (4feet)with aluminium housing, heat sink, integrated HF electronic driver complete( including lamp)

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.