PROVN OF SENTRY LIGHT AND EXTERNAL ELECTRIFICATION FOR CBRN TRG HUB PROVN OF NON GEYSERS PLANT IN DISTRUBUTION SYSTEM AND PROVN OF CERTAIN MINOR WORKS UNDER GE MAINT AT INF SCHOOL MHOW

Amount

M & L For 9.00 meters long Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 Complete all as specified and directed.

Supply and fixing of LED street light fittings of capacity 60 watts rating 240 Volt, 50 Hz and IP-66 protection. complete all as specified and as directed by Engr-in-Charge . Make :- Havells/CG or equivalent in Wipro and Bajaj. HAVELLS CAT PART NO-ENDURAPEARLNEOSL60WLED757PASYTOPC

Supply and fixing of street light brackets made out of GI tubing, light grade, 40mm bore 1200 mm Long bent to shape at 120 degree, fixed on pole by providing MS clamp made up of flat iron 40x6 mm including bolts, nuts and washer of suitable size, complete and paintign one coat of aluminium paint over a coat of red oxide primer.

Supply and fixing two single core weather proof cable with multistranded copper conductor of size 2.5 sqmm and drawing into PVC junction box to GI pipe bracket and connect to street light fittings including one run of insulated cable 1.5 sqmm aluminium conductor green coloured connected from PVC junction box to street light fittings for street light fittings earthings.

M&L for making/febricating junction box made out of 2mm thick MS Sheet of size 250mm x 200mm x 100mm bus bar of capacity 63 Amps properly accomudated with MCB SP-6 Amps fixed properly on steel tubular poles by using suiatble sizeof MS clamps, nuts bolts

M&L for Plain Cement concrete (1:2:4) type B 2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and directed.

M&L for Plain Cement concrete (1:4:8) type D 2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and directed.

M&L for Plain Cement concrete (1:3:6) type C 1 (using 20 mm graded stone aggregate) as in roof kerbs or pole coupling of size 300x300 mm or chamfered on edges all as specified and directed.

Supply and fixing of GI tube light grade of 15 mm dia size for protection of UG cables along with pole using 25 x 5 mm thick MS FI clamps of required shape with bolts, nuts, washers along the poles complet all as specified & directed.

Supply and laying of GI tube'Light' grade of 40 mm dia size for protection of UG cables including sealing ends & all around required fitting in trenchesunder floor or roads/ along the poles or wall all as specified & directed.

M&L for XLPE insulated and PVC armoured heavy duty electric cables with aluminum conductor, 1100 volt grade of size 3.5 core 70 sqmm in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with suitable size aluminum lugs and testing complete all as specified & directed for the following sizes:- Note : (a) Excavation shall be measured and paid seperately under respective items of Sch 'A' (b) All requried lugs of suitable sizes according to laying of cable is deemed to be included in the rate coated.

All as per item No 11 above but size of cable but 16 Sqmm 4 core.

All as per item No 11 above but size of cable but 10 Sqmm 2 core.

Excavation in intrenches in any type of soil and not exc 1.5 m wide and n.exc 1.5 m in depth for laying of cables/ fixing poles, stays etc and getting out complete all as specified and directed

All as per item No 14 above but depth exc 1.5m but nexc 3.00m Complete all as specified and directed.

Returning, filling in including spreading levelling, watering and well ramming in layers not exceeding 25 cm thick with excavated soil complete all as specified and directed.

Removing excavated material (surplus soil) to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 m above the starting point all as specified and directed.

M & L for river washed and screened dry fine sand filling in trenches below and above around under ground cable for cable protection including punning around cable complete all as specified and directed. Note : Sand cushioning shall be measured after punning thick i.e 18 cm only.

Supply and laying sub class 'B' bricks modular brick laid in trenches as cable covers complete all as directed.

S & F of MCB SP 240 Volts 5 to 32 Amps, 10 KA, 'B type including connection with suitable sziwe aluminium/coppper lugs complete all as specified and directed by Engr-in-charge.

S & F of MCB SPN 6 to 40 Amps, 10 KA, 'C' series including connection with suitable sziwe aluminium/coppper lugs complete all as specified and directed by Engr-in-charge.

Supply and fix double door SPN DB 8 way of powder coated suitable for MCB's fittted with bus bar Neutral link Earth bar and Dion rail complete concealed suitable in wall by cutting chasis incl paster work etc and making good and matching the disturbed surface of wall etc complete all as specified & directed by Engr-in-charge.

M&L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to main earth lead GI strip 32 x 6 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule part-I 2009 complete all as directed. connected to earthing test point all as specified or indicated including testing on completion Note : Main earth lead beyond 7.5 meter shall be measured and paid saperatly.

Supply, installation, testing and commissioning out door type LT panel board ,made out of 3.15mm thick CRCA sheet , factory made, cubical type,with slanting top at leaset 10 Cm projection all around, fedder pillar type,fabricated with 50x50x6mm angle iron frame work with busbar chamber cable tray on both side fully compartmentlized design, double door type & commen openable hinged door from rear side, floor mounting type, busbars made of aluminium duly insulated with heat retardent fire proof (HRFR) heat shrinkable sleeves of relevant colours.Bus bar shell be properly supported/mounted on epoxy insulators.All live parts and joints shall be insulated with (HRFR) shrouds, conforming to IS, including provn for connecting suitable earth strips,painting with one coat of anti corrosive coating and finally epoxy polyester powder coating of flint Grey shade (RAL-7032), Confirming to IP 54 protection and confirming relavent IS, comprising the adequate arrangement to supply & fix the following accessories,including connecting cable glands and cable lugs,fixing of earth lead to earth terminal of panel including necessary excavation & PCC foundation complete all as specified & Directed by Engr-in-Charge.( Note:- Cost of all accessories are deemed to be included in the rate quoted) .

Supply, installation Testing and commissioning DECRIN DOSING PUMP MODEL 96NGQ51 Reciprocating pump feeder for injecting Chlorine solution employing motor-driven reciprocating chemical pump having output of 2 U.S GPD to 4 US GPD and adjustable high pressure of upto 100 PSI with the following specifications:- (i) High Pressure Single Head Gear Motored Adjustable dosing pump. (ii) Adjustable High Pressure 0 to 100 PSI (iii) Power 230 Volts, 50 Hz (iv) RPM-44 (v) HP- 1/30 Fractional In addition the Pump should Include the following accessories and to be connected as per Manufacturer's Instructions:- (a) Lead Tubing (b) Connecting nuts (c) Injection Check Valve (d) Clay Weight (e) Ferrules Note:- (a) Liquid end of the Dosing Pump and accessories (b) Length of Lead Tubing will be as per ground requirement. The vendor requested to visit the sites before quoting the rates and to quote accordingly. (c) Boring of CI/DI delivery lines for fixing of ferrules and all other connection including connecting the chlorine injector to delivery line and making it leak proof including adjusting the flow rate to achieve 2 ppm residual chlorine at existing delivery line all as specified and directed. Rate quoted is deemed to be inclusive for the job. (d) The complete system to be tested for entire satisfaction of Engr-in- charge.

Supply Installation, testing and commissioning of Altoch Dosing System consisting of 100 Ltrs capacity FE/FRP MOC with PE/ FRP Lid & Level gauge along with Single Phase Electric Motor and Agitator with Shaft and blade in Plastic, mounted on tank. Lid Must have port hole for pouring Chlorine Chemical and water when necessary. Lid must have provision for mounting dosing Pump on the lid/ wall.

M&L for providing brick masonry basement for Dosing System of size 1.2 x 1.2 x 0.6 M with cement concrete (1:4:8) in foundation (using 40 mm graded stone Aggregate Type D-2) including necessary excavation and plastering and iron grill shelter for protection of Dosing System with angle Frame and 12 mm sq bar (15 cm gap between bars ) including necessary locking arrangements, welding and grouting etc. complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring for one 3 pin socket outlet 5 Amps on same board with other switches along with PVC insulated sheathed stranded copper conductor cable of size 2 x 1.5 Sqmm with PVC insulated sheathed stranded copper conductor cable of size 1.0 Sqmm for earth continuity wire, to be drawn in and including FR PVC heavy duty casing capping not less than 20 mm width including MS sheet metal switch / terminal box 1.2 mm thick and Hylum sheet switch including all necessary wall cutting for sinking's of boxes and making good disturbed surface all as directed and specified .

M&L for switch socket combination 2 in 1, 5 Amps flush type including connection (to be incorporated against item No.29) complete all as specified and directed by Engr-in-Charge

Supply and fixing of Sheet Metal enclosure single door, 2 way, single pole and neutral complete all as specified and as directed by Engr-in-Charge.

Supply and fixing of MCB 6-32 Amp SPN, 'C' Series 240/ 415 V, 50 Hz, 10 KA, suitable for motor and other induction loads complete all as specified and as directed.

Supply and laying or fixing or passing through pipe, 1100 volts graded heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed stranded conductor 2 core of size 4.00 Sqmm nominal cross section for service connection complete all as specified and as directed by Engr-in-Charge

M&L for point wiring with PVC insulated FR LS PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal corss sectional area of phase / neutral drawn in & including non metallic rigid PVC conduit ISI marked medium grade no less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching the disturbed surface of wall with existing surface wall & 1.5 sqmm green FR PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including galvanised boxes with bakelite sheet for mounting switches, sockets , fan regulators etc for following :- Make for PVC conduit :- Polycab/Kilinga /Plaza

(a) One Exhaust fan point controlled by one switch.

S&F of switch piano flush button single pole one way 5/6 Amp 240 volt complete as directed

Supply and fix of ceiling rose surface bekelite 63.5mm dia three terminal complete

Supply and fixing of Exhaust fan 250mm sweep, AC single phase 230 Volts, metallic type, 900 RPM complete with louver including electric connection with suitable size copper conductor cable, clamps , nuts, bolts etc including making hole of appropriate size in the existing birck wall and making good the disturbed wall and matching with the existing surface of wall complete all as specified and directed by Engr –in-charge Make : Havells Model : Ventil Air –DX white or equivalent in /Bajaj/Crompton

Ankit construction

Vinayak Trading House