Renovation of Type-II twin set quarters No. FD/P/KT/4(AB) at Karmatang under Karmatang Range

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. a) Allkinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead upto 50 m and lift upto 1.5m.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

P/L in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level

1:3:6 (1 Cement : 3 coarse sand(zone-III) : 6 graded stone aggregate 40 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring ,shuttering ,finishing and reinforcement -All work upto plinth level.

1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Reinforcement for RCC work including straighting cutting,bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500 D or more.

Providing and fixing upto floor five level precast cement concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand ), cost of required centring, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand ) on exposed surfaces complete. a)1:1½:3 (1 Cement : 1½ coarse sand(Zone III) : 3 graded stone aggregate 20 mm nominal size).

Providing wood work in frames of doors, windows, panels and other frames, (including labour @30% of cost of timber) a) Sawn Timber Cat II A from Govt Saw Mill Betapur (Timber required for this item of work will be provided by Department)

Providing and fixing plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) :

6 mm thick cement board as per IS: 14862

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 gm per sqm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

Ridges plain (500 - 600mm)

Gutter (600 mm over all girth)

Making Plinth Protection 50mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

12mm cement plaster of mix : a) 1:4 (1 cement: 4 fine sand)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Water thinnable cement primer.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : a) Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm

Providing and fixing stainless steel AISI 304 (18/8) kitchen sind as per is 13983 with CI brackets and stainless steel plug 40 mm including painting of fitting and brackets, cutting and making good the walls wherever required, Kitchen sink without drain board, 610x510mm bowl depth 200 mm

Providing and fixing brass sliding door bolts ISI marked with nuts and screws etc. complete

Providing and fixing bright finished brass handles with screws etc. complete :

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :

Providing and fixing bright finished brass hard drawn hooks and eyes :

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. (Internal work)

a) 15 mm dia. nominal bore

b) 20 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work

a) 15 mm dia. nominal bore

b) 20 mm dia. nominal bore

Providing and fixing C P brass bib cock of approved quality confirming to IS:8931: a) 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore

Providing and fixing water closet squatting pan (Indian type WC Pan) with 100 mm sand cast iron P or S trap.10 litre low level PVC flusing cistern with manualy controlled device (handle lever) conforming to IS: 7231, Parryware/ Hindware/ Seabird/ Orient (Coral) ith all fittings and fixtures complete including cutting and making good the walls and floors wherever required

Providing and fixing soil, waste and vent pipes :

a) 100 mm dia Sand cast iron S&S pipe as per IS: 1729.

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. a) 100 mm dia Sand cast iron S&S as per IS - 1729

Providing and fixing single equal plain junction of required degree : a) 100 x 100 x 100 mm Sand cast iron S&S as per IS - 1729.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying CC Drain 23 x23 cm along with floating coat of neat cement, complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.

Sixe of Tiles 600x600 mm

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc as reqd. 'Group C'

Wiring for Circuit / Sub Main wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required.

a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire

a) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire

b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Supplying and fixing 3 pin, 5 amps ceiling rose on the existing junction box / wooden block including connection etc as required.

Supplying of pre-wired for LED, power saving Decorative Ultraslim round profile LED tube light fittings, 20 W similar to HAVELLS E-Lite LED Pride Plus nxt or equivalent.

Supplying of LED retrofit bulbs 9 watts B22 (Cool Day light) . Similar to C & S Chandra 9 w white or equivalent

Supplying of Energy Saving star rating A.C. Ceiling fan 1200 mm sweep,with all accessories and Step type electronic Fan regulator. (Similar to HAVELLS ES-50 Premium or equivalent in Make: Orient/ Usha /Crompton or equivalent with ISI.)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Installation ,Testing, Commissioning of pre wire, fluorescent fitting/ compact fluorescent fitting of all type, complete with all accessories and tube / lamo etc. directly on ceiling / wall, including connection with1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc as required.

Installation, testing and commissioning of ceiling fan, including wiring with the down rods of standard length (up to 30 cm) with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing PVC batten/ angle holder including connection etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

a) 8 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240 /415 volts, 'C' curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

A) Single pole

B) Double pole