REPAIR TO JOINERY, FLOORING, FALSE CEILING AND CERTAIN MISC B/R WORK AT KASHMIR HOUSE MAIN BLDG, WEST HUTMENTS AND HQ IDS IN THE AOR OF AGE B/R KASHMIR HOUSE UNDER GE NEW DELHI

Amount

Dismantling boarding any descriptin , fixed in any position with screws.

S&F powder coated aluminium partition using 95.6 mm x 44.8mm x 1.6mm frame work with 12 mm thick exterior grade veneered particle boards with decorative veneers on both faces/6 mm thick frosted glass as directed by Engr-in-Charge including aluminium beading for fixing board (Make: GLASS Make MODI/ FLOAT/ ATUL).

S&F 18mm thick MDF board pre laminated both side fixed with aluminium screws as in storage cabinet/cub board incl all fittings fixtures and builder hardware etc all as directed by Engr-in-Charge , working station etc Make Kitply/M/s Green Ply

S&F 100 mm wide Venetian blinds vertical type incl guide rail, pulling thread etc incl taking down existing pelmets.

S&F ZEBRA venetian blinds horizontal type incl guide rail, pulling thread etc incl taking down existing pelmets.

Demolition of stone slabs and tiles of any description or thickness in floors, wall aprons etc laid bedded and pointed in any mortar incl mortar screed of any description incl removal of debris from site.

S&F 20 mm thick granite work (any type ) Black or any approved coloured (table rubbed and polished in step, jambs, pillers cooking plateform, floor and like in cement mortar (!:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20 mm thick screed in CM 1:6

Dismantling plain or corrugated steel sheeting, any gauge, thickness, incluuding Nainital or similar pattern roof coverings all as directed by Engr-in-Charge.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F 2mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc

S&F 10 mm thick coloured polycarbonate multiwell sheet manufactured from high quality, UV stabilzed resins in roof covering incl necessary fittings & fixtures like aluminium strips, aluminium tee, coach screw and washers etc with silicon joints filler for fixing complete of any colour all as specified and directed by engineer in charge

Demolition of cement concrete in ground floor and pavings n.ecx 15 cm in thickness below or above ground level & removing the rubbish out of MoD land.

M&L 75mm thick cement concrete type D-2, 1:4:8 (40 mm graded agg) as in sub base complete all as specified

M&L PU Coated cement concrete Paver tiles of size 300x300x25mm set in 15mm thick CM(1:6) including filling joints withwhite or colour cement as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade

Dismantling water tanks exc 250 ltr and n. exc 500 ltr and removal from site complete all as specified and directed by Engr-in-Charge.

Dismantling water tanks exc 500 ltr and n. exc1000 ltr and removal from site complete all as specified and directed by Engr-in-Charge.

Disconnecting existing tanks exc 1000 ltr but n. exc 2000, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and repairing etc complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position including Tank Nipple, 20 mm bore ball brass valve and with union (Two Nos each) , fittings complete all as specified and directed by Engr-in-Charge.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position including Tank Nipple, 20 mm bore ball brass valve and with union (Two Nos each) , fittings complete all as specified and directed by Engr-in-Charge.

Dismantling wrought or mild steel work of any description not otherwise provide for.

S&F to Joist, channel, angle, or tee sections, confirming to Fe 410W gde 250 A quality fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) including necessary form work of height upto 2 storey complete all as specified and directed

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

S&F 4 mm dia galvanised steel wire, 100 X 100 mm mesh, made up into mattresses or cages, lapped, wired and laid in position including closing after filling and applying two coat of synthetic enamel paint over a coat of red oxide primer both side all as specified and directed

M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying tow coats of synthetic enamel paints over one coat of red oxide primer.

S&F in repairs snow white vitreous china EWC single peice type 700X370X645 mm incl seat cover and flush fittings complete fixed in floor with brass screw complete Make : JAQUAR CAT Part No: SLSWHT-6851S220P/SLSWHT-6851S110P or equivelent of Parryware,Johnson Pedder complete all as specified and directed by Engr-in-Charge

S&F in repair wash hand basin vitreous china white, counter basin of size 540X480 mm including making good the surface/joints with white cement complete all as directed by Enge-in-Charge. Make : CERA CAT Part No: 1009.

S&F WHB vitreous china of size 530x420x140mm fancy type oval shape fixed on 20mm thick granite counter, stainless steel brackets 32 mm bore CP brass waste cupling and PVC down pipe 32 mm bore of appropirate length and PVC connection 15 mm( with PTMT Nuts) bore complete.Make : Cera/Jaquar

S&F in repair vitreous china urinal half stall type, white (excluding flushing cistern flush pipe and waste pipe) including PVC waster pipe providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screws pointing around urinal back in cement fixing automatic flushing cistern with brackets flush pipe grating and uniion for discharge pipe (excluding of fixing supply pipe to flushing cistern trap and waste complete all as specified and directed

S&F urinal vitreous china including waste coupling (excluding flushing cistern flush pipe and waste pipe) including PVC waste pipe providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screws/nut bolts pointing around urinal back in cement and uniion for discharge pipe complete all as specified and directed and all acessaries of JAQUAR CAT PART (URSWHT-13253) and equivelent in CERA,HINDWARE etc.

Dismantling wall & ceiling boards of any description as in panelling ceiling, partition, cup boards etc incl cover fillets in any surfaces complete all as specified and as directed

S&F prelaminated PVC rigid foam sheet wall panelling of 5 mm thick stuck on inner frame work of 35 mm wide strips of 5 mm thick rigid foam sheet. The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 300 mm C/C. The PVC strips to be fixed to the all using 65 mm long MS screws through the groove in the strip by using PVC fasteners including necessary moulding work on doors, windows, pillers and opening etc complete all as directed at site .Make:- ECON, Rajshri Note:- (a) Work for fixing of wall panelling shall be got executed through manufacturers authorised applicators only under the close supervision of their technical staff. (b) The entire qty of wall panelling and their allied ancillaries shall be procured directly from the manufacturer or their authorised dealer only.

S&F Mineral fibre ceiling boards 12 mm thick 600 X 600 mm size incl grid 25 X 25 X 1.6 mm thick GI powder coated angles 25 X 35 X 1.6 mm size ‘T’ (Armstrong) section fixed with suspenders from ceiling etc (Armstrong New Lotus)

M&L for GI powder coated micro preforated micro look false ceiling with fleece lay- in- type 0.50mm thick, suitable for grid/frame module of 600mmx600mm size complete with GI powder coated grid consisting of silhonthe main T runner 15mm suspended at 1200mm centre to centre and cross T runner of 15mm size suspended at 600mm centre to centre suspended by 4mm GI rod from roof slab including steel fastner wall angle and T with interlocking arrangement as required for framing grid suitable for module size 600x600mm ceiling etc complete all as per specification and directed (Make : armstrong/hunterduglas)

S&F in repairs ceiling boards 12 mm thick 600x600 mm thick.(New Lutos 70)

Taking down chowkhats or frame without taking off shutters n.exc 1.50 sqm each

Taking down chowkhats or frame without taking off shutters exc 1.50 sqm but n.exc 4.0 sqm .

S&F powder coated aluminum door using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size (Make : Godrej/Harrison) 02 Nos tower bolt 150 mm , door handles, SS butt hinges 125 mm 04 Nos, hydraulic door closer and fittings complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size Make of glass (MODI/FLOAT/ATUL).

S&F powder coated aluminum door using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size (Make : Godrej/Harrison) 02 Nos tower bolt 150 mm , door handles and fittings on floor spring complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size Make of glass (MODI/FLOAT/ATUL)

S&F powder coated aluminium window using 63 mm X 38 mm X 1.6 mm chowkhats with 48mm X 48 mm X 1.6mm openable section as in shutter incl 5.5 mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100 mm -02 Nos, tower bolts 100 mm 02 Nos, hooks and eye – 02 Nos 150 mm , butt hinges 100 mm 04 Nos etc complete all a specified and directed by Engr-in-Charge.

S&F aluminium ornamantal grill 8mm dia 75x95mm aperture complete incl U channel complete all as specified and as directed

M&L for 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

M&L for 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

M&L Ist class hardwood plain solid straight chowkhats and frames, wrought frames rebated on the solid rounded or chamfered put together with glue pinnes at joints complete all as specified and directed at site

S&F 40mm thick 2nd class teak hard wood framed louvered shutter with stiles and rail 50 to 75mm wide and panels filled with fixed louvers from 15mm to 18mm thick complete all as specified and as directed

S&F parliament hinges mild steel cold rolled with 150mm width of recess between flanges when open.

M&L for prepparation of new surfaces of wood or wooden based material of any description not other wise described over 10 cm in width or girth and applying two coats synthetic enamal paint over one coat of pink primer

S&F butt hinges 100 long medium weight cold rolled SS with SS hinges pins finished bright and smooth complete

S&F aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified

S&F extruded aluminium alloy handle fabricated type anodised size of handle 125 mm complete all as pattern/design

S&F aluminium alloy anodised sliding door bolt 300 mm size with hasp & staple (bolt type) and fixing clips of sheet cost or extruded sectionand fixing bolt of extruded section or cost aluminium alloy complete all as directed

Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:4 as in closing the openings.

Taking down cement plaster on brick /concrete wall surfaces including racking out joints hacking for key scrubbing down with water etc and removing the rubbish out of Mod Land.

M&L 15mm thick Ready mix plaster (Make : Ultratech) on brick work or concrete surfaces of wall (external surface) finished even and smooth complete all as specified and as directed by Engr-in-Charge

M&L 15mm thick Ready mix plaster (Make : Ultratech) on brick work or concrete surfaces of wall (Internal surface) finished even and smooth complete all as specified and as directed by Engr-in-Charge

M&L for preparation of newly plastered surfaces and applying two coats of OBD over a coat of alkali resistant primering paint on walls .

M&L for preparation of new plastered surfaces and applying two coats of weather appex paint over a coat of birla white wall care putty complete all as specified and as directed

Removal of debris from kashmir house in a loading truck of 200 cubic feet and removal to a distance n.exc 20 KM Note : (a) Due to conjuction of space vehicle will be stand atleast 500 mtr from the debries location (b) Cost for stacking of debries from various loc is also included in the quoted rate. (c) The vehicle shall be loaded by the labour so sufficient labour shall be arrange by the contractor. (d) Contractor shall be responsible to submit the Dvr Lic, Veh RC, Police verification for obtaining permission of veh and lab from H block.

S&F in repair 15mm bore Brass chromium plated single lever wash hand basin piller cock quarter turn as per cat part No OPP-CHR-15001PM of JAQUAR or equivelent complete all as specified and as directed

S&F in repair bib taps 15mm bore, fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed, complete, all as specified and directed.

S&F in repair 15mm bore brass chromium plated bib cock with wall flange of Jaquar Cat Part No CON 037KN or equivelent complete all as specified and directed

S&F in repair 15 mm bore chromium plated fancy type brass angular stop cock with wall flanged screwed down high pressure screwed both ends for iron pipe or for unions. Make : JAGUAR CAT Part No OPP-CHR-15053PM or equivelent complete all as specified and directed by Engr-in-Charge

S&F in repair 15 mm bore brass chromium plated TWO way bib taps with knob to operate, complete all as specified and directed by Engr-in-Charge. Make : JAGUAR CAT Part No:VGP-CHR- 81041 or equivelent

S&F in repair cast copper alloy chromium plated health faucet with 1.0mtr flexible pipe 15mm of Jaquar or equilent as approved by EIC

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60 gms)

Dismantling floor hearth or wall tiling including cement mortar bedding and removing rubbish of the premises .

M&L vitrified ceramic tiles 10 mm thick(Square/Rectangular) polished area of each tile not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white of coloured cement to match over and including 15 mm thick screed bed in cm 1:6.

S&F non skid ceremic tiles 7 to 8 mm thick (square/rectangle) area of each tiles exc 0.06 but n.exc 0.11sqm in floors set and jointed in neat cement slurry and pointed in white /coloured cement laid over and incl 15mm thick screed in CM 1:6 .

M&L for glazed ceremic tiles in vertical surface of size 450X300X7 mm on vertical Surfaces of wall on 10mm cement mortar 1:3 set and jointed in net cement slurry and pointed in white or colour cement to match complete all as specified

M&L for glazed ceremic tiles in vertical surface of size 600X300X7 mm on vertical Surfaces of wall on 10mm cement mortar 1:3 set and jointed in net cement slurry and pointed in white or colour cement to match complete all as specified

Shivam Firetech Engineers

B Kumar and Co