PROVN OF HARDSTANDING AND GAZEBO NEAR RAJINDER CIRCLE PARK AT JAIPUR MIL STN UNDER GE(S) JAIPUR

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and as directed.

M&L for surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 m depth and getting out in soft /loose soil etc complete all as specified and directed.

Removal of excavated materials (soils) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed.

Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil etc complete all as specified and directed.

M&L for Hard core, of broken stone/boulder broken to gauge n exc 63 mm etc complete all as specified and directed.

M&L for brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, surfaces finished even and fair without using extra cement complete all as specified.

M&L for newly plastered surfaces of walls and applying two coats of exterior acrylic emulsion paint over a coat of primer complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (40mm graded aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St.-240 cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., complete all as specified and directed.

S&F mild steel bolts, diameter of neck 12 mm machine made screw bolts not exc 15cm long complete all as specified and directed.

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410-W(Gde-E- 250)quality-A complete all as specified and directed.

M&L for preparation of new steel surafces of any description not otherwise described , over 10 cm width or girth , priming with a coat of red oxide primer and applyinng two coats of synthetic enamel complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated or mangalore tiles pattern steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Providing cement concrete 1:2:4 type B-1 (20mm graded agg) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling) corbels, brackets, etc. (of any section indicated), with plain fair faces,including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed.

M&L for Cement concrete type D-2 (1:4:8) 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws, all complete all as specified and directed.

S&F 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.

M&L for powder coated (minium thickness 50 micron) aluminium window and ventilator shutters, fixed/side hung or sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified and directed. Note: Rate shall be inclusive of 4.8 mm thick plain or tinted glass sheet for glazing etc.

M&L for powder coated aluminium door shutters aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges anodised alumnium snap beading, screws etc. including locking arrangement ie two no of tower bolt and one mortice lock complete all as specified and directed. Note: Rate shall be inclusive of 4.8mm thick plain sheet for glazing etc.

S&F door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium (Die cast) body complete all as specified and directed.

M&L for suspended false ceiling ORCAL extra micro perforation size 600 x 600 x 15mm ceiling tiles over suspension metal system (MICRO LOOK) designer grid (15mm grid 8mm return) SILHOUETTE X L 15mm (NOMINAL) including necessary hanging system arrangement as per manufactures instruction which is required to be made from existing RCC roof/stone slab of building complete all as specified and directed.

M&L for providing 10 mm thick coloured outdoor tiles area exc 0.09 Sqm to 0.16 sqm including 20mm thick screed bed in CM 1:6 set and jointed in neat cement slurry complete all as specified and directed.

M&L for coloured PU moulded chequered tiles cement concrete tiles 20cmx20cmx25mm thick, set jointed & pointed in neat cement slurry in floors with grey cement & pigment over 20mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) as in interlocing tiles ,PCC below or sides of road surfaces and interlocking/chequered tiles complete all as specified and directed.

M&L for Machine pressed precast concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 Grade, with colour/without colour cement laid over and including 25mm thick sand cushion layer complete all as specified and directed.

M&L for Pre-cast cement concrete block type B-1 (1:2:4) (20mm graded) masonry with solid blocks, exc. 10 cm in width and setting in CM (1:4), as in kerb stones complete all as specified and directed.

M&L for 15-16 mm thick Granite work (table rubbed & polished) in cooking plat forms, door/window cill & edges, steps, jamps, pillars in single piece and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite including including grinding and polishing, complete all as specified and directed.

S&F GI tubes medium grade with all fittings laid in trenches of 50 mm bore of pipe complete all as specified and directed.

Schedule of Credit

K P BUILDERS (BID ID -3318780)

UNIVERSAL INFRAPROJECT PVT LTD (BID ID -3331354)