Construction work of 3x5.00 meter span RCC minor Bridge and approach road in place of the causway located at Km-5 of Kui Akhariya link road

Dewatering pump 10 hp (01 nos)

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60metres.SOR Sr no.692

Dismantling cement concrete or brick or work including stacking of dismantled materials as directed by the Engineer-in-charge within a distance iof 60metres.SOR Sr no.694

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.as per MoRTH Sr no.12.01&Technical Specifications clause 304.

Sand Filling in Foundation Trenches as per Drawing & Technical Specification .MoRTH Sr no.12.03&Technical Specifications clause 304.

Plain Cement Concrete in Open Foundation complete as per Drawing and Technical Specific-ations. (PCC Grade M15).MoRTH Sr no.12.8&Technical Specifications clause 1500, 1700 & 2100

Plain Cement Concrete in Open Foundation complete as per Drawing and Technical Specific-ations.PCC Grade M20 using batching plant transit mixer & manual placing..MoRTH Sr no.12.8&Technical Specifications clause 1500, 1700 & 2100

Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specific-ations.(RCC Grade M25) Sr no.12.8&Technical Specifications clause 1500, 1700 & 2100

Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.(RCC Grade M30 using batching plant transit mixer & manual placing) Sr no.12.8&Technical Specifications clause 1500, 1700 & 2100

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. Sr no.15.1&Technical Specifications clause 2503

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. Sr no.12.42&Technical Specifications clause 1600

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications Sr no.14.4&Technical Specifications clause 2702

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification clauses Sr no.13.8 & Technical Specifications clause 2706 & 2200.

Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall return wall to the full hight, compacted to firm condition complete as per drawing and as per drawing and technical specification clause 1204.3.8

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces Sr no.8.08 &Technical Specifications clause 803

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause

Laying and spreading available soil in the subgrade on a prepared surface, pulverising, mixing the spread soil in place with rotavator with 2 per cent slaked lime having minimum 70 per cent of contents of CaO, grading with motor grader and compacting with the smooth wheel road roller at OMC to the desired density to form a layer of improved Sub-grade as per Technical Specification Cluase 403.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading II as per Technical Specification Clause 405.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading III as per Technical Specification Clause 405

Providing and applying primer coat with bitumen emulsion (SS-2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Bitumen VG-10 using emulsion distributor at the rate of 0.35 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A as per Technical Specification Clause 508.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C, @ 0.65 kg/m2 as per Technical Specification Clause 510

Providing and laying reinforced cement concrete 1000 mm pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106.

Please Enable Macros to View BoQ information