REPAIR TO ROOF CEILING FLOORING JOINERY SANITARY FITTINGS AND CERTAIN MISC WORKS AT OTM ACCN UNDER AGE BR III KHOJATOLI UNDER GE RANCHI

Amount

Taking down cement plaster etc on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water incl skiting and dado etc complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick wall built in CM (1:4) complete all as specified and directed.

M&L Brick work with sub class `B` bricks straight or curved on plan exc 6 m mean radius built in CM (1:6), complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement.

M & L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) on wall finishing the surfaces even and smooth without using extra cement.

M&L for 10 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement complete all as specified and directed.

Taking up or down steel tubing and connection of 15 mm bore complete all as directed at site.

All as per item No 8 above, but for 20 mm dia bore pipe

S&F steel tubing and connection tubing in new or old position to walls, ceiling, floors etc complete all as directed at site for 15 mm bore.

All as per item No 10 but for 20 mm dia

Refixing only steel tubing and connection in new or old position to walls, ceiling, floors etc complete all as directed at site for 15 mm bore.

All as per item No 12 but for 20 mm dia

S&F in repair for 10 ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed.

M&L for pillar tap of 15mm dia bore pipe, cast copper alloy with capstan head chromium plated with or without lettered “hot or cold” with long screwed shanks and fly nuts screwed for iron pipe fixed in repair, complete all as specified and directed.

S&F in repair vitreous china wash basin, white flat back size 550 x 400 mm including waste, chain & plug and poreclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waste pipe fitted complete all as specified and directed.

S&F for PVC connection pipe of 15 mm dia and 45 cm long to WHB flushing cistern fixed in repair, complete all as specified and directed.

S&F in repair for PVC waste pipe of 32/38 mm dia and 1000 mm long to WHB, urinal and Kitchen sink complete all as specified and directed.

Dismantalling of existing water tanks and removing to store and S&F 3000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed.

Dismantalling of existing water tanks and removing to store and S&F 2000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed.

Dismantalling of existing water tanks and removing to store and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed.

Dismantalling of existing water tanks and removing to store and S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed.

S&F as in repair water tank cover for 500/1000 Ltrs capacity suitable for PVC tank

S&F in repair 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as directed. Make- Prayag

S&F in repair 110 mm PVC (SWR) pipe single socket in any length with rubber ring joints fixed to wall including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as directed at site.

All as per item No 25 above but 75 mm dia.

S&F PVC (SWR) bends any radius of 110 mm dia .

S&F PVC (SWR) bends any radius of 75 mm dia .

S&F in repair 15 mm bore stop cock chromium plated, copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends to iron pipe in repair complete all as directed.

All as per above item No 29 above but 20 mm dia.

S&F in repair, 15mm bore chromium plated bib taps cast copper alloy with crutch handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement.

M&L hold fast made out of MS flat iron.

S&F frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290.Gde-E-165.

Dismantling steel window and ventilators including guard bar etc complete all as specified and directed.

S&F steel window with side hung shutter including projecting type hinges with steel handle and steel peg stayhold fast etc complete with glazing bar dovetailed or welded complete all as specified and directed.

All as per item No 36 above but without glazing bars.

S&F factory made steel ventilators with top hung shutter including hinges,steel peg stay complete all as specified and directed.

M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, bed plate etc complete all as specified and directed.

Taking down chowkhats or frame n.exc 1.50 Sqm each with shutter without taking off shutter from framed complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 Sqm but n.exc 4 sqm each with shutter without taking off shutter from framed complete all as specified and directed.

Taking down shutters of any description n. exc 1 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 Sqm each complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing.

M&L for 2nd class hard wood plain,solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fixed.

M/L for 2nd class HW rail and style plain framed, factory made paneled shutter (two panel) with interlocking rail and 12mm veneered particle board with commercial veneering on both faces the size of rail and style as per IS -1003 (Pt-I)kiln seasoned and chemically pressure treated for 35mm thick shutter complete as directed.

M&L for 30 mm thick flush shutters solid core construction,with block board core and plywood face panels,commercial type on both sides complete all as specified as directed.

S&F 2nd class HW glazed and skelton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass. Gauze etc and all as specified in SSR and fitted to chow Kats.

S&F in repair galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40 mm complete all as directed.

Hacking out old broken glass( any thickness size quality or description) from wooden frames glazed with putty or fixed with beads.

S&F sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane thickness of glass 3mm.thick complete all as specified and directed

All as per item No 52 above but n.exe 0.5 sqm in each 3mm figured glass.

S&F Hasp and staple safety type aluminium anodized hinges pin incl bolt to hinges plate 125 mm long.

S&F extruded aluminium alloy butt hinges 100mm size type B-21 complete all as specified and directed

S&F butt hinges 100mm long medium weight cold rolled MS and fixed, complete all as specified and directed.

All as per above item No 56 above but 75mm long.

S&F 150 mm long aluminium anodized barrel tower bolt extruded section.

S&F aluminium handles cast type anodize 125 mm long.

S&F 150 mm long mild steel barrel tower bolts, stove enamelled black,with bright bolt all as specified and directed.

All as per above item No 60 above but 100 mm long.

S&F 125 mm size of handle of mild steel pressed handles,oval type ,stove enamelled black complete all as specified and directed.

All as per item No 62 above but 100mm long.

S&F 300 mm long of bolt Mild steel sliding door bolts,plate type,stove enamelled black,with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alumionium alloy and fixed 250mm long.

S&F in repair for curtain rails, mild steel, chromium plated with fixing brackets,stops,rollers etc.

M&L applying two coat of synthetic enamelled paint over one coat of pink primer on wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surface complete all as specified and directed

M&L for preparing the newly surface of any description not otherwise described over 10 cm width or girth on steel surface and applying two coats of synthetic enamel paint over one coat of zinc chromate premix.

Dismantling of boarding any description, fixed in any position with screws all as specified

S&F in Repair prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination in cupboard complete all as specified and directed.

M&L for 30mm width of flap MS piano hinges complete all as specified and directed.

S&F in repair vitreous china bowl urinal flat back,size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe(excluding flushing cistern,flush pipe and waiste pipe)

S&F MS 300 mm ordinary rat rail rod pattern spring including roller and roller plate complete fixed in repair.

S&F in repair steel handle nickel anodized 125 mm long with joints for steel window complete all as specified and directed.

S&F in repair steel casement stay of size 300 mm with hinged joint and two plates with studs with nickel anodized complete all as specified and directed.

S&F in repair vitreous china squalting pan Orrisa pattern size of 580 x 440 mm white with 'P'or 'S' trap,front or back inlet and integral foot rest (excluding flushing cistern and flush pipe including connection to trap and to flushing pipe etc encluding making good to floor complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet seat black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging devise.

S&F in repair shower rose chromium plated with or without swivel joints 100 mm dia Complete all as specified and directed.

Demolition of plain cement concrete in ground floor and paving not exceeding 15cm thickness below or above ground level complete.

M&L for cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in lean concrete for foundation in drain,manholes etc complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 Type D-2 using 40mm graded aggregate as in sub base complete all as specified and directed.

M&L 75mm thick PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection and path.

M&L 40mm thick PCC 1:2:4 type B-1 using 20mm graded aggregate as in floors, finished concrete surface even and smooth with using extra cement complete all as specified and directed.

S&F glass dividing strips 3 mm thick & 38mm wide inserted in position complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate bedding of tiles/Kota stone complete all as specified and directed.

S&F granite slab of 20mm thick in steps,cooking platforms,and like over 15mm thick screedbed in CM (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Dismantling of wall or floor tilling including cement mortar bedding complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm thick over 10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.11sqm but n.exc 0.18 sqm in floor etc,over 15 mm thick screed bed in CM(1:4),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles n. exceeding 0.36 sqm over 15 mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match .

All as per item No 91 above but in skirting ,dado etc over 10 mm thick cement plaster in CM (1:4) complete all as specified and directed

M&L coloured prepolished chequered cement concrete tiles with grey cement and no pigment 30cm x 30 cm x 25mm thick , over 15mm thick screed bed in CM 1:6, set jointed and pointed in neat cement slurry in floors complete all as specified and directed.

Sand filling under floors/hardstanding or in foundations including watering and ramming.

M&L 60 mm thick machine pressed precast concrete interlocking paver block manufactured from ordinary portland cement any shape and size conforming to IS 15658-2006, M-35 Grade with grey cement and pigment.

S&F in repair stainless steel kitchen sink with drainage board 1 mm thick including bedding in cement mortor on to dwarf wall or including fixing centilever brackets over all size 915 mm x 460mm bowl size 410 mm x 330 mm x 160mm and including 38/40mm dia waiste pipe complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

M&L for preparation of new surface on walls and applying three coats of white wash on wall complete all as specified and directed.

M&L for preparation of new surface on ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for repair and rendering 10mm thick in cm 1:3 on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs complete all as specified and directed.

M&L PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in sunken floor .average thickness 40mm and making adequate slope towards spout pipe etc complete all as specified and directed.

M&L rendering 10mm thick on fair faces of brick or concrete surfaces and finishing the surfaces even and smooth without using extra cement in CM (1:4) complete all as specified and directed.

M&L for PCC (1:5:10) type E-2 using 40mm graded brick aggregate as in sunken portion complete all as specified and directed.

S&F 32 mm dia GI spout light grade for sunken portion complete all as specified and directed.

M&L for bitumen blown 85/25 applied hot two coats to concrete surfaces at the rate of 1.2 Kg/sqm per coat complete all as specified and directed.

M&L for polythene film black 200 micron laid in floors etc complete all as specified and directed.

M&L Aluminium door with Al box frame 101.6x44.5x2.0mm,aluminium glazed door shutter with two panel made of vertical style of size 85x44.5x 1.5mm and bottom, top & middle rail of size 114.30x44.5x1.5mm with locking arrangement with lock and self closing device with rebated fixing builders hard wares and fitting springs, glazing clips rubber packing for air locking handles 120mm dia pivot Al tower bolt 200mm long anodized Al snap bearing screw etc for fixing glass panes in frame shutters with rubber packing complete all as specified and directed.

M&L in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other part made of mild steel heavy duty and fixed.

S&F as in repair aluminium door closer hydrulically regulated, universal type suitable for door shutters upto 1000mm width.

Welding in repairs exc 2.5cm but n exc 5 cm in length and thickness of metal to be welded n exc 6mm.

M/s Dwarika Nath Singh

M/S JAI MATA DEE CONTRUCTION CO.

M/S ABDHESH CONSTRUCTION